Professional Documents
Culture Documents
20 GNA 0363 - Datasheet - Peerless Pump Brochures and Flyers - AE - v8
20 GNA 0363 - Datasheet - Peerless Pump Brochures and Flyers - AE - v8
20 GNA 0363 - Datasheet - Peerless Pump Brochures and Flyers - AE - v8
SINGLE-STAGE DOUBLE-
SUCTION PUMP
Series AE
comes in 42 different hydraulic configurations and 25 pump • From small, single-pump commercial
installations to large, multi-pump municipal
sizes. Discharge sizes range from two to ten inches. The AE has water supply systems
The double-suction impeller is a single Replaceable bronze shaft sleeves protect Pressure Up to 510 psi
cast-bronze piece. Dynamic balancing gives the carbon steel shaft through the stuffing box. Horsepower Up to 550 hp (410 kW)
the impeller vibration-free hydraulic and The shaft sleeves extend beyond the
mechanical performance. The balancing also mechanical seal flanges (or packing glands) Temperature Up to 250°F (121°C)
provides a longer bearing life and mechanical for maximum shaft protection. O-rings seal Drives Motors, engines, steam turbines,
seal life. Keyed to the shaft with an 18-8 the sleeves. The shaft and shaft sleeves are combinations
stainless steel key, the impeller aligns axially available in stainless steel.
Liquids Water, clear liquids
with threaded shaft sleeves.
The bearings are single-row, deep-groove
Grooved impeller skirts (in combination ball-type and grease-lubricated. Their average Materials Cast iron, bronze fitted as
with casing rings) extend the life of critical life is 100,000 hours. Double-row, outboard standard. Other materials
are available.
clearances and increase the mean time thrust bearings and oil lubrication are optional
between preventative maintenance (MTBPM).
ANSI NSF 61 & 372 safe drinking water and
Peerless Pump standard mechanical seals low-lead certified.
are mounted over a bronze shaft sleeve and
rated for temperatures up to 225°F.
AE SERIES RANGE — 1750 RPM AE SERIES RANGE — 3550 RPM
FLOW (M³/HR) FLOW (M³/HR)
20 30 50 100 200 300 500 1000 2000 3000 40 50 60 80 100 200 300 400 500 700 900
400 200
600
100
300 500
200 60 400
HEAD (Meters)
HEAD (Meters)
100
HEAD (Feet)
HEAD (Feet)
40 300 90
80
100 30 70
200 60
70 20
50
50
40 40
10
30
100 30
90
20 6 80
15 5 70
50 80 100 200 400 7001000 2000 4000 7000 10000 150 200 300 400 500 700 1000 2000 3000 4000
FLOW (GPM) FLOW (GPM)
6 Grease Lubrication
(Standard)
9 10 11
7 Case Assembly
Higher-quality pump castings with
35,000 psi or better tensile strength
cast iron are standard. 250# flange
thickness and diameter with 125# or
250# drilling standard on most models.
Peerless Pump designs tough, versatile products to meet your pumping needs. The AE Series delivers
variety, durability, standardized options and configurations unequalled in the industry.