SAPAL is weather resistant, water-based acrylic Usage as Sealant
sealant and waterproofer for use as sealant and • Can seal joints, cracks, nail heads and the waterproofing membrane for old and new roofs, entire roof surface. gutters, joints and cracks, and for to common • Can seal gutters and downspouts. construction materials including concrete, tegula, • Can seal joins or roof decks, parapet walls, cement metal surfaces, tumbler and plastic that cures firewalls, etc. into a tough elastic film that withstand severe • Can seal cracks on concrete walls, wood- expansion and contraction movements. It is elastic, cement joints. ready to use weather resistant, durable solvent-free, • Can seal fitting of sinks, wash basin, drain does not crack over time and can be painted over with pipes, and the like. a water-based paint. Usage as waterproofer FEATURES AND BENEFITS • Roof decks • 380% Elastic • Basement • Paintable • Walls • Crack Resistant • Toilet and bath • Water-based • Kitchen • balcony APPLICATION Estimating Guide As Sealant As a sealant : Clean and dry the surface before application. @ 6.0 mm Ø 3.0 linear meters Remove all laitance, dust, oil, contaminants and As a puttty : previous coating from area of application, Scrape off @ 1 coat 3 - 5 m2 per liter flaking paint and any loose material. As waterproofer: @ 1 coat 14 m2 per liter Apply SAPAL on the area of application with the use of spatula. Do not dilute with water. Apply SAPAL Healthy and Safety directly. Keep away from children’s reach. If swallowed, see a As a Waterproofer doctor immediately. In case of eye contamination, For vertical and horizontal application rinse with plenty of water. SAPAL is water-based and Clean and dry the surface before application. non-flammable. Remove all laitance, dust, oil contaminants and LIMITATIONS previous coating from the substrate. Allow new Do not use on damp or wet surfaces concrete to cure for minimum of 26 days. Dilute part of SAPAL to half part water. Mix PACKAGING thoroughly in separate clean container. Available sizes: 250 grams 24pcs per box Apply SAPAL with the use of brush or a roller over 1kilo 12pcs per box the substrate. For roof decks, basement 3-5 coats for 4Liters 6pcs per box walls, kitchen, toilet and bath: 2 coats 16 Liters 1pail /16 liters Allow an undercoating interval of 2-3 hours. Let dry for 24 hours before flood testing. Important Note: The information contained in this leaflet is published to the best of our knowledge an d is supported by current available data. Hence, subject to the ca re an d me t h od o f application, deviations (from published values) in performance may occur. Our guarantee is therefore limited to the quantity of the supplied material.