Declaration of Conformity No. 102 2023 Rev.0 Draw Hook 1500kN TSI WAG

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

„EC“ declaration of conformity of interoperability constituent No: 102/2023

„EC“ declaration identification number: CZ/0000CZ47675942/2020/000002


We, manufacturer
MSV Metal Studénka, a.s.
R. Tomáška 859
742 13 Studénka
Czech Republic
Declare under our sole responsibility that the following interoperability constituent:
Draw hook 1500kN
in accordance to drawing No. 455.0.233.01.002; 455.0.233.01.001
455.0.233.01.002TUD; 455.0.233.01.015
455.0.233.01.028R; 455.0.234.02.001
To which this declaration refers complies with the relevant Union law:
TSI RST WAG (EU) No. 321/2013 of 13 March 2013
as amended by Commision Regulation (EU) No 1236/2013 of 2 December 2013
Commison Regalution (EU) 2015/924
(EU) 2019/776
(EU) 2020/387
EN 15566:2016
Directive (EU) 2016/797 of 11 May 2016 (as amended)
Module SB and SD according to Commission Decision 2010/713/EU
has been assessed by the following Notified Body:
Výzkumný Ústav Železniční, a.s.,
Registration number: 1714
Praha 4, Braník,
Novodvorská 1698,
PSČ 142 01, CZE
In accordance with the following approval(s) and/or certificate(s):
1714/8.1/SB/2018/RST/CSEN/3154/V02 issue 04.01.2021
1714/8.4/SD/2018/RST/CSEN/3155/V03 dated 04.01.2023
The following conditions of use and other restrictions apply: none
The following procedures have been followed in order to declare conformity:
MODULE SB:EC Type Examination
MODULE SD: Quality Management System Approval
List of Annexes:
Assesment report: ZJA15001RST-4; ZJA15002RST-4; ZJA15011RST-4; ZJA18180RST-2, ZJA18181RST-2; ZJA18182RST-
2; ZJA19190RST-2; ZJA21138RST-1; Výzkumný Ústav Železniční, a.s., Praha 4, Braník, Novodvorská
1698, PSČ 142 01, CZE; Date of Issue: 20.12.2022

Audit Report: ZQA15001RST-4; ZQA15002RST-4; ZQA15011RST-4; ZQA18180RST-2


ZQA18181RST-2; ZQA18182RST-2; ZQA19190RST-2; ZQA21138RST-1_MSV; Výzkumný Ústav
Železniční, a.s., Praha 4, Braník, Novodvorská 1698, PSČ 142 01, CZE; Date of Issue: 04.01.2023

Done on: Studénka 01.02.2023


Signature of Manufacturer:

____________________________
Ing. Robert Köller
Manager of technicial department
„EC“ declaration of conformity of interoperability constituent No: 102/2023
Date: 01.02.2023 Author: Robert Köller Issue: 0 Page: 1 of 1

You might also like