Professional Documents
Culture Documents
Basic Synchronization Isx15
Basic Synchronization Isx15
(/qs3/pubsys2/xml/es/manual/4324607/es4324607-titlepage.html)
Remove
Valve Camshaft Gear
△ CAUTION △
Do not attempt to disassemble any gear before reading the
scissor gear definitions. Serious personal injury may result if
instructions are not followed.
△ CAUTION △
Do not attempt to disassemble any gear before reading the scissor gear definitions.
Engine damage may result if these instructions are not followed.
The lower idler scissor gear, if equipped, must be unloaded during valve camshaft gear
removal. To unload the gear, two of the gear adjusting screws must be backed up enough to
allow the teeth on the scissor gear to align.
Unload the lower idler scissor gear.
NOTE: This step is not required for a gear train with a lower idler gear.
Remove the valve camshaft gear mounting bolt and valve camshaft timing disc.
NOTE: Do not disassemble the camshaft tone ring.
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 1/5
17/6/2020 QuickServe Online | (4324607) ISX15 CM2350 X101 Service Manual
Completely install the valve camshaft gear mounting bolt.
Loosen the screw two turns.
Use the gear puller to remove the valve camshaft gear from the
camshaft nose.
△ CAUTION △
Do not attempt to remove any gear before reading the instructions.
Definitions of scissor gear. Damage may result to
engine if these instructions are not followed.
△ CAUTION △
The camshaft idler gear shaft may come off and
be damaged when the camshaft idler gear is
removed.
The lower idler scissor gear, if equipped, must be unloaded during removal of any gear. To unload
the lower idler scissor gear, two of the lower idler scissor gear adjusting screws must be backed
out enough to allow the teeth on the lower idler scissor gear to align.
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 2/5
17/6/2020 QuickServe Online | (4324607) ISX15 CM2350 X101 Service Manual
Unload the lower idler scissor gear.
NOTE: This step is not required for a gear train with a lower idler gear.
Remove the retainer, retainer, camshaft idler gear, and idler gear shaft screws.
△ CAUTION
△
Do not attempt to disassemble any gear before reading the
scissor gear definitions. Engine damage may result if these
instructions are not followed.
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 3/5
17/6/2020 QuickServe Online | (4324607) ISX15 CM2350 X101 Service Manual
△ CAUTION △
The fuel pump idler gear shaft can come out and be
damaged when the fuel pump idler gear is removed.
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 4/5
17/6/2020 QuickServe Online | (4324607) ISX15 CM2350 X101 Service Manual
△ CAUTION
△
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 5/5
17/6/2020 QuickServe Online | (4324607) ISX15 CM2350 X101 Service Manual
Do not attempt to remove any gear before reading the
instructions.
Definitions of scissor gear. Damage may result to
engine if these instructions are not followed.
https://quickserve.cummins.com/qs3/portal/service/manual/es/es4324607/ 6/5