Professional Documents
Culture Documents
NSF Certificate of Paint - 35530 NSF 2021 11
NSF Certificate of Paint - 35530 NSF 2021 11
Alert: NSF is concerned about fraudulent downloading and manipulation of website text. Always confirm
this information by clicking on the below link for the most accurate information:
http://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21710&Standard=061&
NSF/ANSI/CAN 61
Drinking Water System Components - Health Effects
NOTE: Unless otherwise indicated for Materials, Certification is only for the Water Contact
Material shown in the Listing. Click here for a list of Abbreviations used in these Listings.
Click here for the definitions of Water Contact Temperatures denoted in these Listings.
Facility : Conroe, TX
Water Water
Water Contact Contact Contact
Trade Designation Size Restriction Temp Material
Coatings - Fittings
Hempadur Multi-Strength 35530[1] >= 3" CLD 23 EPOXY
https://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21710&Standard=061& 1/3
11/9/21, 10:46 AM Listing Category Search Page | NSF International
Maximum Field Use Dry Film Thickness (in mils): 1 coat application: 20; 2 coat
application: 20 (12 mils red, 8 mils grey)
Recoat Cure Time and Temperature: 24 hours at 20°C
Final Cure Time and Temperature: 7 days at 20°C
Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
period.
Coatings - Pipe
Hempadur Multi-Strength 35530[1] >= 48" CLD 23 EPOXY
Coatings - Tank
Hempadur Multi-Strength 35530[1] >= 1000 gal. CLD 23 EPOXY
Coatings - Valve
Hempadur Multi-Strength 35530[1] >= 2" CLD 23 EPOXY
https://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21710&Standard=061& 2/3
11/9/21, 10:46 AM Listing Category Search Page | NSF International
Special Comments: Mix ratio of base:cure agent is 3:1 by volume; 10 minute induction
period.
https://info.nsf.org/Certified/PwsComponents/Listings.asp?Company=21710&Standard=061& 3/3