Professional Documents
Culture Documents
Bedg 2023
Bedg 2023
______________
Q.1 (a) Write the functions of compass, divider and French curve. 03
પરિકિ, રિવાઈિિ અને ફ્રેન્ચ કવવ ના કાર્વ લખો.
(b) Why scale is required for preparing drawing? List recommended 04
scales for engineering drawing.
ડ્રોઇંગ તૈર્ાિ કિવા માટે સ્કેલ શા માટે જરૂિી છે ? એન્ન્જન્નર્રિિંગ ડ્રોઇંગ માટે ભલામણ
કિેલ સ્કેલની સૂન્ચ બનાવો.
OR
(c) Construct a regular Pentagon using universal method having side of 07
40 mm.
ર્ુન્નવસવલ પદ્ધન્તનો ઉપર્ોગ કિી 40 મીમી ની બાજુ ધિાવતો ન્નર્ન્મત પિંચકોણ બનાવો.
(c) Draw a conic curve for Distance from directrix to focus and vertex is 07
respectively 60 and 30 mm and Give name of curve.
1
િાઇિેક્રીકસ થી ફોકસ અને વટેક્સનુ અિંતિ અનુક્રમે 60 mm અને 30 mm હોર્ તેવો
કોનીકલ કવવ દોિો અને તેનુ નામ આપો.
Q.3 (a) Draw the projections of point: 03
(i) Point A, 20 mm above HP and 15 mm in front of VP.
(ii) Point B, 10 mm below HP and 25 mm behind VP.
(iii) Point C, 15 mm above HP and 15 mm behind VP.
બબિંદુના પ્રક્ષેપો દોિો:
(i) બબિંદુ A, 20 મી.મી. આિી સપાટીથી ઉપિ અને 15 મી.મી. ઊભી સપાટીથી આગળ
છે .
(ii) બબિંદુ B, 10 મી.મી. આિી સપાટીથી નીચે છે અને 25 મી.મી. ઊભી સપાટીથી
પાછળ છે .
(iii) બબિંદુ C, 15 મી.મી. આિી સપાટીથી ઉપિ અને 15 મી.મી. ઊભી સપાટીથી
પાછળ છે .
(b) The distance between the end projectors of a line AB is 65 mm. The 04
end A is 15 mm above HP and 25 mm in front of VP and the end B is
40 mm above HP and 50 mm in front of VP. Draw the projections of
the line AB and find its true length.
િેખા AB ના પ્રક્ષેપો વચ્ચેનુિં અિંતિ 65 મી.મી. છે . છે િો A HP થી 15 મી.મી. ઉપિ અને
VP થી 25 મી.મી. આગળ છે . જર્ાિે બીજો છે િો B HP થી 40 મી.મી. ઉપિ અને VP
થી 50 મી.મી. આગળ છે . તો િેખા AB ના પ્રક્ષેપો દોિો અને તેની સાચી લિંબાઈ શોધો.
(c) A rectangular plane of 45 x 65 mm side rests on shorter side on HP, 07
and this shorter side is inclined at 30° to the VP. Draw the projection
of plane if the plane is inclined 45° to HP.
એક લિંબચોિસ ૪૫X૬૫ મી.મી. બાજુ વાળી સપાટી તેની નાની બાજુ ઉપિ આિી
સપાટીમાિં પિેલી છે , અને આ નાની બાજુ ઉભી સપાટી સાથે ૩૦° ખૂણો બનાવે છે . જો
આ સપાટી આિી સપાટી સાથે ૪૫° ખૂણો બનાવતી હોર્ તો તેના પ્રક્ષેપો દોિો.
OR
Q.3 (a) Draw the Projections of following Points: 03
(i) Point D, 20 mm below HP, and 30 mm in front of VP.
(ii) Point E, in HP and 30 mm behind VP.
(iii) Point F, in HP and VP and VP both.
બબિંદુના પ્રક્ષેપો દોિો.
(i) બબિંદુ D, 20 મી.મી. આિી સપાટીથી નીચે અને 30 મી.મી. ઊભી સપાટીથી આગળ
છે .
(ii) બબિંદુ E, આિી સપાટી માિં અને 30 મી.મી. ઊભી સપાટીથી પાછળ છે .
(iii) બબિંદુ F, આિી સપાટી અને ઊભી સપાટી બન્ને માિં છે .
(b) A straight line PQ is 60 mm long has its end ‘P’ 20 mm above the HP 04
and 15 mm in front of VP. Draw the projection of line if it is inclined
at 30° to VP while its front view is inclined 45° to XY. Draw the
projections and find its true inclination with HP.
એક સીધી િેખા PQ 60 mm લાિંબી છે તેનો છે િો ‘P’ HP થી 20 mm ઉપિ છે અને
VP થી 15 mm આગળ છે . અને તે VP સાથે 30° ખૂણો બનાવે તેમજ તેનો સામેનો
દેખાવ XY લાઈન સાથે 45° નો ખૂણો બનાવે તો લાઈન PQ ના પ્રોજે કશન દોિો અને
HP સાથેનો સાચો ખૂણો શોધો.
(c) A square thin plate of 40 mm sides has its one of side AB inclined at 07
45° to the HP and other side AC which is perpendicular to AB is at
30° to the VP. Draw its projection.
2
એક 40 mm બાજુ વાળા ચોિસની એક બાજુ AB, HP સાથે 45° ના ખુણે છે . બીજી
બાજુ AC જે AB ને કાટખૂણે છે તે VP સાથે 30° ખુણો બનાવે છે . તો તેના પ્રક્ષેપો
દોિો.
Q.4 (a) Fill in the blanks based on Third Angle Method. 03
(i) F.V. is at the ________ of all projections.
(ii) T.V. is ________ F.V.
(iii) L.H.S.V. is on _________ of F.V.
ખાલી જગ્ર્ા પૂિો તૃતીર્ કોણીર્ પદ્ધન્તને આધાિે.
(i) F.V. બધા જ પ્રક્ષેપણોની ________ િહે છે .
(ii) T.V. એ F.V. બિાબિ ________ િહે છે .
(iii) L.H.S.V. એ F.V. ની બિાબિ _________ િહે છે .
(b) Draw the symbol of the third angular projection method with 04
appropriate measurements.
ર્ોગ્ર્ માપ સાથે તૃતીર્ કોણીર્ પ્રક્ષેપણ પદ્ધન્ત નુિં પ્રતીક દોિો.
(c) Figure (1) shows pictorial drawing of an object. Draw front view 07
and top view using first angle projection method looking from X
direction.
આકૃતી (1) માિં વસ્તુનો ન્ચત્રમર્ દેખાવ દશાવવેલ છે . પ્રથમકોણ પ્રક્ષેપણ ની િીતથી X
રદશા થી જોતા તેનો સામેનો દેખાવ અને ઉપિનો દેખાવ દોિો.
OR
Q.4 (a) Fill in the blanks based on First Angle Method. 03
(i) F.V. is at the ________ of all projections.
(ii) T.V. is ________ F.V.
(iii) R.H.S.V. is on _________ of F.V.
ખાલી જગ્ર્ા પૂિો પ્રથમ કોણીર્ પદ્ધન્તને આધાિે.
(i) F.V. બધા જ પ્રક્ષેપણોની ________ િહે છે .
(ii) T.V. એ F.V. બિાબિ ________ િહે છે .
(iii) R.H.S.V. એ F.V. ની બિાબિ _________ િહે છે .
(b) Draw the symbol of the first angular projection method with 04
appropriate measurements.
ર્ોગ્ર્ માપ સાથે પ્રથમ કોણીર્ પ્રક્ષેપણ પદ્ધન્ત નુિં પ્રતીક દોિો.
(c) Figure (2) shows pictorial drawing of an object. Draw front view 07
and top view using first angle projection method looking from X
direction.
આકૃતી (2) માિં વસ્તુનો ન્ચત્રમર્ દેખાવ દશાવવેલ છે . પ્રથમકોણ પ્રક્ષેપણ ની િીતથી X
રદશા થી જોતા તેનો સામેનો દેખાવ અને ઉપિનો દેખાવ દોિો.
Q.5 (a) Draw the Block Diagram of Computer System. 03
કમ્પ્ર્ુટિ ન્સસ્ટમનો બ્લોક િાર્ાગ્રામ દોિો
(b) State the advantages of CAD. 04
CAD ના ફાર્દા જણાવો.
(c) Figure (3) shows two views of an object. Draw isometric view and 07
show necessary dimensions.
આકૃન્ત (2) માિં વસ્તુના બે દેખાવો આપેલા છે . તેનો આઇસોમેરીક દેખાવ દોિી જરુિી
માપ દશાવવો.
OR
Q.5 (a) Explain the computer system in brief. 03
કોમ્પ્ર્ુટિ ન્સસ્ટમને ટૂિંકમાિં સમજાવો.
(b) State the advantages of AutoCAD. 04
AutoCAD ના ફાર્દા જણાવો.
(c) Explain with illustration following commands. 07
(a) Point (b) Line (c) Circle
3
નીચેના કમાન્્સ ઉદાહિણ સાથે સમજાવો.
(a) બબિંદુ (b) િેખા (c) વતુવળ
4
Figure (3) Q.5(C)