Professional Documents
Culture Documents
VAMOS
VAMOS
BSC Data
AHRVAMOS
Type: Identifier
Range: OFF, ON
Unit: -
Default: -
Command: RFVBC, RFVBP
O&M: -
Comment: This parameter activates the VAMOS allocation using AMR HR
speech codecs in the BSC.
OFF VAMOS Allocation using AMR HR speech codec is not
active.
ON VAMOS Allocation using AMR HR speech codec is active.
Valid from release: BSS G11B
AWBVAMOS
Type: Identifier
Range: OFF, ON
Unit: -
Default: -
Command: RFVBC, RFVBP
O&M: -
Comment: This parameter activates the VAMOS allocation using AMR WB
speech codecs in the BSC.
OFF VAMOS Allocation using AMR WB speech codec is not
active.
ON VAMOS Allocation using AMR WB speech codec is active.
Valid from release: BSS G11B
HRVAMOS
Type: Identifier
Range: OFF, ON
Unit: -
Default: -
Command: RFVBC, RFVBP
O&M: -
Comment: This parameter activates the VAMOS allocation using non-AMR HR
speech codecs in the BSC.
OFF VAMOS Allocation using non-AMR HR speech codec is not
active.
ON VAMOS Allocation using non-AMR HR speech codec is
active.
Valid from release: BSS G11B
VAMOSBSCSTATE
Type: Identifier
Range: OFF, ON
Unit: -
Default: -
Command: RFVBI, RFVBE, RFVBP
O&M: TRHs on RPG2 and RPG3 must be halted to enable VAMOS
Comment: Status of VAMOS in the BSC. This parameter indicates the status
of VAMOS functionality in the BSC.
OFF VAMOS is not activated.
ON VAMOS is activated.
Valid from release: BSS G11B
Cell Data
VCSCC
Type: Numeral
Range: 0-4080 in steps of 8
Unit: -
Default: -
Command: RFCAC, RFCAP
O&M: The value of the parameter can only be decreased when the cell is
halted. The value of the parameter can be increased when the cell
is active or halted.
Comment: SCC (Simultaneous Call Connections) limit for VAMOS. This
parameter changes the number of possible SCC in the cell, set up
using VAMOS.
Valid from release: BSS G11B
AQPSKONBCCH
Type: Identifier
Range: Disabled, Enabled
Unit: -
Default: Enabled
Command: RFVCC, RFVCP
O&M: The cell has to be halted to change the value of AQPSKONBCCH.
Comment: AQPSK (Adaptive Quaternary Phase Shift Keying) modulation on
BCCH frequency. This parameter enables the AQPSK modulation for
a Traffic Channel (TCH) on the Broadcast Control Channel (BCCH)
frequency.
DISABLE AQPSK is not allowed to be used on the BCCH frequency.
D
ENABLED AQPSK is allowed to be used on the BCCH frequency.
Valid from release: BSS G11B
ASSV
Type: Identifier
Range: OFF, ON
Unit: -
Default: ON
Command: RFVCC, RFVCP
O&M: -
Comment: VAMOS allocation at reception of the message ASSIGNMENT
REQUEST. This parameter enables the allocation of channel for a
Mobile Station (MS) in an active VAMOS pair at call setup.
OFF VAMOS allocation at call setup is not allowed.
ON VAMOS allocation at call setup is allowed.
Valid from release: BSS G11B
SSTHRASSV
Type: Numeral
Range: 47-100
Unit: dBm (negative)
Default: 80
Command: RFVCC, RFVCP
O&M: -
Comment: DL signal strength threshold at call setup for VAMOS at
ASSIGNMENT REQUEST.
Valid from release: BSS G11B
SSTHRV
Type: Numeral
Range: 47-100
Unit: dBm (negative)
Default: 95
Command: RFVCC, RFVCP
O&M: -
Comment: The minimum DL and UL signal strength that is required to allow
VAMOS at call set up and intra cell handover.
Valid from release: BSS G12B
QBAHRV
Type: Numeral
Range: 0-100
Unit: dtqu (deci transformed GSM quality units)
Default: 50
Command: RFVCC, RFVCP
O&M: -
Comment: Channel quality threshold for MSs in an active VAMOS pair using
an AMR HR TCH. This parameter sets when an MS using an AMR
HR TCH is moved from an active VAMOS pair due to bad quality.
Valid from release: BSS G11B
QBAWBV
Type: Numeral
Range: 0-100
Unit: dtqu (deci transformed GSM quality units)
Default: 50
Command: RFVCC, RFVCP
O&M: -
Comment: Channel quality threshold for MSs in an active VAMOS pair using
an AMR WB TCH. This parameter sets when an MS using an AMR
WB TCH is moved from an active VAMOS pair due to bad quality.
Valid from release: BSS G11B
QBNAV
Type: Numeral
Range: 0-100
Unit: dtqu (deci transformed GSM quality units)
Default: 45
Command: RFVCC, RFVCP
O&M: -
Comment: Channel quality threshold for MSs in an active VAMOS pair using a
non-AMR TCH. This parameter sets when an MS using a non-AMR
TCH is moved from an active VAMOS pair due to bad quality.
Valid from release: BSS G11B
QDESDLOV
Type: Numeral
Range: -10 to +10
Unit: dB
Default: 0
Command: RFVCC, RFVCP
O&M: -
Comment: VAMOS desired downlink quality offset. This parameter changes
the offset for desired downlink quality for the used speech codec
when the MS becomes part of an active VAMOS pair.
Valid from release: BSS G11B
QDESULOV
Type: Numeral
Range: -10 to +10
Unit: dB
Default: 0
Command: RFVCC, RFVCP
O&M: -
Comment: VAMOS desired uplink quality offset. This parameter changes the
offset for desired uplink quality for the used speech codec when
the MS becomes part of an active VAMOS pair.
Valid from release: BSS G11B
TSCSET1PAIRS
Type: Identifier
Range: NO, YES
Unit: -
Default: YES
Command: RFVCC, RFVCP
O&M: The cell has to be halted to change the value of TSCSET1PAIRS.
Comment: This parameter enables two MSs using Training Sequence Code
(TSC) from TSC set 1 to form an active VAMOS pair.
YES Two MSs using TSC set 1 are allowed to form an active
VAMOS pair.
NO Two MSs using TSC set 1 are not allowed to form an
active VAMOS pair.
Valid from release: BSS G11B
VAMOSCELLSTATE
Type: Identifier
Range: OFF, ON
Unit: -
Default: -
Command: RFVCI, RFVCE, RFVCP
O&M: The cell has to be halted to change the value of
VAMOSCELLSTATE.
Comment: The parameter indicates the status of Voice sevices over Adaptive
Multi-user channels on One Slot (VAMOS) functionality in the cell.
OFF VAMOS is not activated.
ON VAMOS is activated.
Valid from release: BSS G11B
CLTHV
Type: Identifier
Range: OFF, ON
Unit: -
Default: OFF
Command: RFVCC, RFVCP
O&M: -
Comment: This parameter enables cell load thresholds for VAMOS Allocation, VAMOS Packing
and splitting of VAMOS pairs into non-VAMOS allocations (de-VAMOS).
Valid from BSS G12B
release:
THRAV
Type: Numeral
Range: 0 to 100
Unit: %
Default: 15
Command: RFVCC, RFVCP
O&M: -
Comment: The high cell load threshold to use for VAMOS allocation. Only used if CLTHV is ON.
This parameter indicates a percentage value of number of unblocked TCH BPCs and
when the number of idle TCH BPCs in the cell is below the value, VAMOS allocation
will be initiated.
Valid from BSS G12B
release:
THRVP
Type: Numeral
Range: 0 to 100
Unit: %
Default: 10
Command: RFVCC, RFVCP
O&M: -
Comment: The high cell load threshold to use for VAMOS usage during VAMOS Packing
evaluation. Only used if CLTHV is ON. This parameter indicates a percentage value of
number of unblocked TCH BPCs and when the number of idle TCH BPCs in the cell is
below the value, VAMOS Packing will be initiated.
Valid from BSS G12B
release:
THRDV
Type: Numeral
Range: 0 to 100
Unit: %
Default: 100
Command: RFVCC, RFVCP
O&M: -
Comment: The low cell load threshold to use for de-VAMOS (splitting a VAMOS pair into non-
VAMOS allocations) evaluation. Only used if CLTHV is ON. This parameter indicates a
percentage value of number of unblocked TCH BPCs and when the number of idle TCH
BPCs in the cell is above the value, de-VAMOS will be initiated.
Valid from BSS G12B
release:
IMBVAMOS
Type: Identifier
Range: YES, NO
Unit: -
Default: NO
Command: RXMOC, RXMSC, RXMOP
O&M: -
Comment: VAMOS allocation when RX path imbalance. This parameter
indicates if VAMOS allocation is allowed when RX path imbalance
exists.
YES VAMOS allocation is allowed when RX path imbalance
exists.
NO VAMOS allocation is not allowed when RX path imbalance
exists.
Valid from release: BSS G12B