Professional Documents
Culture Documents
Black Toothless - PDF Version 1
Black Toothless - PDF Version 1
com
and
toothless dragon
Svetlana Maksimenko
INSTAGRAM @_FUNNY.HOOK
2023
Material's list
1. Fine yarn/4ply Yarn Art Baby Cotton 50g/165m (50% cotton, 50% acrylic)
• 454 (dark gray)
• 460 (black)
about 30cm
2
@_FUNNY.HOOK_ 2023
Extra stitch (replaceable)
When knitting, the marker at the beginning of the row is almost always moved to
the right. It needs to be leveled. And how to do it?
You only need to knit 1 more st at the end of the row and move the marker one st.
The second point becomes the first and the first becomes the last. This is a replaceable (additional)
stitch.
Abbreviations:
• MR - magic ring
• sc - single crochet
• Pompom: knit unfinished double crochets in a loop with a common top (...) -
• the number in parentheses means the number of loops in the row (...) * N repeat the
• instructions in parentheses N times
Video:
Crochet wings in wire
• frame. Installing pins on the leg. Ustan ov k a
3
@_FUNNY.HOOK_ 2023
Head
We crochet with 2 mm dark gray thread. The marker at the beginning of the row runs exactly in the
middle of the back. Knit additional stitches if necessary. Things on the go.
1. 6bp in RM (6)
2. 6 inc (12)
3. (1sc, inc) * 6 (18)
4. 1sc, inc, (2sc, inc) * 5, 1sc (24)
5. (3sc, inc) * 6 (30)
6. 2sc, inc, (4sc, inc) * 5, 2sc (36)
7. (5sc, inc) * 6 (42)
8. 3sc, inc, (6sc, inc) * 5, 3sc (48)
9. (7bp, increased) * 6 (54)
10. 4sc, inc, (8sc, inc) * 5, 4sc (60)
11. (9bp, increased) * 6 (66)
12. 66pb (66)
13. 5sc, inc, (10sc, inc) * 5, 5sc (72)
14-21. 72sp (8 rows)
22. 18sbn, (36sbn), 18sbn (72)
23. 5sc, dec, (10sc, dec) * 5, 5sc (66)
24. (9sc, dec) * 6 (60)
25. 4sc, dec, (8sc, dec) * 5, 4sc (54)
26. (7sc, dec) * 6 (48)
27. 2sc, dec, (4sc, dec) * 7, ch 3
28. skip 2 sts before the marker and 2 sts after the marker, in the next 1sc, dec, (3sc, dec) * 6, 3sc, 1sc along the chain
(32)
29. 2sc in chain, dec, (2sc, dec) * 7 (24)
30. (2sc, dec) * 6 (18)
31. (1sc, dec) * 6 (12)
32. 6dec (6)
• Cut the thread, fasten, tighten the hole.
• We will use the hole in rounds 27-28 to guide the wire frame from the body to the head.
• Attach dark gray yarn to the first unused front loop of row 21 (keep the hole away from you) and crochet: 17sc, 2sc, 17sc.
Cut the thread, fasten, hide the ends inside.
Eyes (make 2)
Work with Alpina Lena yellow thread in 1 thread, needle size 1.25 mm. 1. 6bp in RM (6)
2. 6 inc (12)
3. (1sc, inc) * 6 (18)
4. (inc, 2sc) * 6 (24)
5. 3sc, 2sc, 2sc (short row)
• Cut the thread, fasten, weave the ends (bring all the ends to the front).
We glue the eyes to the head with the wrong side facing out, since it has less relief
than the front.
4
@_FUNNY.HOOK_ 2023
• On the wrong side of the eye, draw a pupil with black textile paint and highlight it with white paint (see photo). The
increases in HDC in round 5 are located in the upper inner corner of the eye (marked in the photo) •
P.S. If desired, eyes, pupils and reflections can be cut out of felt and glued.
• Leave the eyes on the head, securing them with pins. We sew and glue all the pieces at the end, when we collect all the
other pieces and place them in the places we like.
when decorating
head focus on zinc
trim 2hd heads this
center of the face.
Eyelids (make 2)
We crochet with 2 mm dark gray thread. Ch9, start in second chain from hook: sl-st, 6sc, sl-st. Cut the thread, leaving a
long tail for sewing.
The dragon's mood depends on the location of the eyelids. You can make him angry or a little upset. Try several
options for eyelid placement and choose the one you like best.
* without eyelids
Ears (make 2)
We crochet with 2 mm dark gray thread. The scoreboard for the start of the round is located in the center of
the side. Knit additional stitches if necessary. Don't hit.
1. 6bp in RM (6)
2. (1sc, inc) * 3 (9)
3. 4sc, inc, 4sc (10)
4. 4sc, inc, 5sc (11)
5. 5sc, inc, 5sc (12)
6. (inc, 5sc) * 2 (14) 7-8. 14sc (2 rows) 9.
6sc, dec, 6sc (13)
10. 5sc, dec, 6sc (12)
5
@_FUNNY.HOOK_ 2023
• Fold in half and work 6 sc on both sides. Cut the thread, leaving a long tail for sewing.
Thorns 1 (make 2)
Spikes
6
@_FUNNY.HOOK_ 2023
Thorns 3 (make 2)
We crochet with 2 mm dark gray thread. Don't hit. 1. 6pb
in MRI (6)
2. 6pb (6)
3. (1bp, dec)† 2 (4)
• Cut the thread, leaving a long tail for sewing.
• Secure with sewing pins at head (see photo for location)
hind legs
We crochet with 2 mm dark gray thread. Vp8, start with the second chain from the hook:
1. 6sc, 4sc in the last chain, on the other side of the chain: 5sc, inc (17)
2. inc, 5sc, 4sc, 5sc, 2sc (24)
3. 1sc, inc, 5sc, (1sc, dpi) * 4, 5sc, (1sc, inc) * 2 (31)
4. 9 stbn, (3 st b / n black, 2 st b / n dark gray) * 4, 9 st b / n - short row
(may have a different number of loops).
Move the marker. It should run on the back, in the center of the heel.
Reference point: a straight line of the foundation chain. Line it up in the
process by knitting additional loops.
5. 31pb (31)
6. (4sc, dec) * 2, 7sc, (dec, 4sc) * 2 (27)
Click the YouTube button. There I show
7. 6pb, December, 5pb, December, 4pb, December, 6pb (24)
you how to knit a pompom stitch and
8. 6pb, 6dism, 6pb (18)
make a color.
9-13. 18sp (5 rows)
change.
Start gradually filling your leg with fibrofill.
While firmly filling only the bottom (leg). 14. (5sc, inc) * 3 (21)
15-16. 21sc (2 rounds)
Left hind leg .
7
@_FUNNY.HOOK_ 2023
Right hind leg.
• For plastic leg joints:
17. 6sc, 2ch, skip 2sc, 13sc (21)
18. 6sc, 2sc in chain, 13sc (21)
19. 21pb (21)
• To join cotter legs: 17-19. 21sc (3 rows)
Click the YouTube button. There you will see the installation instructions:
cotter pins plastic connections
fixation fixation
Select mounting diameter: fold the leg in half and choose a disc/hinge that takes up the entire space inside
the stem (D25mm disc/hinge works for me). When using a cotter pin, move 2 rounds down and away from
the marker.
• 7sc to the left (for the right hind leg) 7sc
• to the right (for the left hind leg)
and insert the disc with the key. Continue gradually filling the leg with fibrofill. Fill the top a little.
Next, the right and left hind legs are knitted in the same way. 20.
(5sc, dec) * 3 (18)
21. (1sc, dec) * 6 (12)
22. 6dec (6)
• Cut the thread. Pinch the hole and hide the ends inside.
• Pay attention to the photo below. As an example, I showed you two ways of fastening: a cotter pin on the right leg and a
plastic hinge on the left. Choose the option you like best and use it for the front and back legs.
8
@_FUNNY.HOOK_ 2023
forelimbs
We crochet with 2 mm dark gray thread. The marker for the start of the round must pass at the back, in the
center. Knit additional stitches if necessary. 1. 6bp in RM (6)
2. 6 inc (12)
3. (1sc, inc) * 6 (18)
4. 5 stbn, (3 black stbn, 2 dark gray stbn) * 3, 4 stbn 5-7. 18sp (3 rows)
8. 8pb, December, 8pb (17)
9. 17pb (17)
10. 5sc, dec, 3sc, dec, 5sc (15)
11. 15pb (15)
12. 6pb, December, 7pb (14)
Start gradually filling your leg with fibrofill. While firmly filling only the bottom.
Select the mounting diameter: fold the leg in half and choose a disc/hinge that takes up the entire internal
space of the stem (D15mm disc/hinge is fine for me). When using a cotter pin, move it 1 turn down and
away from the marker.
and insert the disc with the key. Continue gradually filling the leg with fibrofill. Fill the top a little.
9
@_FUNNY.HOOK_ 2023
Next, the right and left front legs are knitted in the same way. 19.
(5sc, dec) * 2 (12)
20.6dec (6)
• Cut the thread. Pinch the hole and hide the ends inside.
Wings (make 2)
Take dark gray yarn, hook size 2 mm, wire with a diameter of 0.9 mm (23 cm-2 pieces, 19 cm-4
pieces, 13 cm-2 pieces).
Better take it with a margin). Bend the end of each wire as shown in the photo. In the
process, be careful, work in rows.
There will be lines where we will t-ch and turn
and rows where we skip 1 p.
10
@_FUNNY.HOOK_ 2023
Next, we knit with a 19 cm long wire (starting from the end of the fold).
11. of the 2nd chain: 2sc, 3sc, + 1sc in the corner, 3sc in the loops of the previous round, + 1sc in the corner, 2sc in the loops
of the previous round, + 1sc in the corner, 2sc in the loops of the previous round of the previous round, + 1sc at an angle, 2sc in
the loops of the previous round (18), ch.
Corner
seams
previous line
corners
previous lines
Next, we knit with a 19 cm long wire (starting from the end of the fold).
23. of the 2nd chain: 2sc, 5sc, + 1sc to the corner, 3sc in
the loops of the previous row, + 1sc in the corner, 3sc in the
loops of the previous row,
+ 1sc in the corner, 1sc in the loop of the previous round, +
2sc in the corners of the previous rounds (19), turn.
11
@_FUNNY.HOOK_ 2023
24. from 2nd loop: 18sc (18), turn.
25. from 2nd loop: 17sc (17), turn.
26. from 2nd loop: 16sc (16), turn.
27. from 2nd loop: 14sc (14), turn.
28. from 2nd loop: 13sc (13), ch, turn.
29. from 2nd loop: 11sc (11), turn.
30. from 2nd loop: 9sc, inc (11), ch, turn.
31. from 2nd loop: 9sc (9), turn.
32. from 2nd cycle: 7sc, inc (9), ch3, turn.
12
@_FUNNY.HOOK_ 2023
Next, we knit with a 13 cm long wire (starting from the end of the fold). 33. from the 2nd chain: 2sc, 8sc (8), turn.
34. from 2nd loop: 4sc (4), turn.
35. from 2nd loop: 3sc (3), turn.
36. from 2nd loop: 2sc, + 1sc to the corner, 4sc along
from the loops of the previous row (7), turn. 37. from the 2nd loop:
4sc, dec (5), ch, round.
38. from 2nd loop: 5sc (5), ch, turn.
39. from the 2nd loop: 5sc (5)
• Cut the thread, leaving a long tail for sewing. Fold the frame
• wire along the upper side of the wing. Make a border along the
• frame. Attach dark gray thread to the points marked in the photo (where the thread
comes out).
the first wire) and knit RLS along the upper side of the wing (see photo). The green arrow shows the crochet direction.
13
@_FUNNY.HOOK_ 2023
Line
We crochet with 2 mm dark gray thread. The marker for the start of the round must pass at the back, in the center.
Knit additional stitches if necessary. 1. 4bp in RM
(6)
2-4. 4sc (3rd row) 5. (1bp,
inc) * 2 (6) 6-8. 6pb (3
rows) 9. (2sc, inc) * 2 (8) 10-11. 8sc (2nd row) 12.
(3sc, inc) * 2 (10)
Body
Continue knitting from the tail. The score for the start of the round passes in the back in the middle. Knit additional stitches if
necessary. Start counting rounds from the beginning for convenience. Focus on 4 pr in a row
1. 11sc, inc, 1sc, 4inc, 1sc, inc, 11sc (36)
2. 6sc, inc, 22sc, inc, 6sc (38)
3. 14sc, inc, 8sc, inc, 14sc (40)
4. 10sc, inc, 18sc, inc, 10sc (42)
5. 3sc, inc, (6sc, inc) * 5, 3sc (48)
6. 48pb (48)
Round 1
body
14
@_FUNNY.HOOK_ 2023
7. (7sc, inc) * 6 (54)
8-9. 54sp (2 rows)
In the tenth row, make crochet holes to attach the joints of the back legs and mark the place to attach the cotter pins.
• For plastic leg joints:
10. 13sc, 2ch, skip 2sc, 24sc, 2ch, skip 2sc, 13sc (54)
11. 13sc, 2sc in chain, 24sc, 2sc in chain, 13sc (54) To fasten the
• legs with keys:
10. 54 sc (between 14 and 15 rounds and 40 and 41 rounds we mark with a thread of a contrasting color for
convenience) (54)
11. 54pb (54)
12-16. 54sp (5 rows)
17. 8sc, dec, (16sc, dec) * 2, 8sc (51)
18. 20pb, Dec, 7pb, Dec, 20pb (49)
Insert the rear leg cotter pins/hinges into the marked vp2 points/holes on the body and screw/fasten (see video below).
Click the YouTube button. There you will see the union of the legs to the body.
plastic connections
fixing cotter pins
fixation
28. 3sc, 1ch, skip 1sc, 4sc, 2ch, skip 2sc, 16sc, 2ch, skip 2sc, 4sc, 1ch, skip 1sc, 3sc (36) - do not confuse! Ch1 - for wing frames,
Ch2 - for plastic hinges.
29. 3sc, 1sc in chain, 4sc, 2sc in chain, 16sc, 2sc in chain, 4sc, 1sc in chain, 3sc (36)
15
@_FUNNY.HOOK_ 2023
• To secure legs with cotter pins:
28. 3sc, 1ch, 28sc, 1ch, 3sc (36) (mark the space between 9 and 10 rows and 27 and 28 rows with a
contrasting colored thread)
29. 3sc, 1sc in chain, 28sc, 1sc in chain, 3sc (36)
16
@_FUNNY.HOOK_ 2023
Tail fin (make 2)
sixteen
We dyed the wings and tail fins with black dry pastel.
17
• Fold in half and knit 4 sts on both sides. Cut the thread, leaving a long tail for sewing.