Professional Documents
Culture Documents
Plumbing: Attchement of Document - GENERAL BUILDINGS - PLUMBING SYSTEM - BASIS OF DESIGN-UG-TIL-00-M044-100382
Plumbing: Attchement of Document - GENERAL BUILDINGS - PLUMBING SYSTEM - BASIS OF DESIGN-UG-TIL-00-M044-100382
PLUMBING
S.no Item code/Model
S20 U COUNTER
BASIN
2
SOD-01,ORIGIN PHOTOCELL
CONTROLLED SOAP
DISPENSER
FLS-01,LOOP R CONTROL
PANEL
5
TOW-01,ARKITEKTA
PAPER DISPENSER
URI-01,PLURAL URINALTAUPE
WCL-01,S20 WALL-HUNG WC
PAN-WHITE
8
WSB-01,HYGIENE WASTE BIN
RFA-01, SIKA
MASTERTILE FLX 24- sealant
10
11
MES-01, PESCARA 360'
PROFESSIONAL SINK
MIXER
12
RFD-01,PARAPET DRAIN
13
Eye washer
14
15
16 Pipes and fittings
18 Pressure reducer
Description
3 MATERIALS
Materials shall comply in every respect with the standards listed. Any substitutions shall
be of equivalent quality and approved by CONTRACTOR and COMPANY..
3.1 Pipes
• Clean water pipe shall be either HDPE or PVC-U or Concrete with push-fit / flexible /
spigot / socket joint.
• Oily water pipe shall be Ductile Iron push-fit with Nitrile joint, GRP/GRE, HDPE or
Carbon Steel.
• Sanitary sewage pipe shall be PVC-U.
The above pipes shall also comply with the “Piping Materials Specification Class Index”
document no. UG-TIL-00-MDT1-700007.
3.2 Steel Pipes
• Steel pipes and specials shall comply with the requirements of EN 10224 and EN
10311.
3.3 Concrete Pipes and Fittings
• Both unreinforced and reinforced concrete pipes and fittings shall have flexible
spigot and socket joints and comply with BS 5911-1, BS 2494, EN 1916 and EN 681-1.
3.4 Unplasticised PVC Pipe
• Unplasticised PVC pipes and fittings shall have flexible spigot and socket joints with
rubber ring seals and comply with BS 4660, EN 1401-1 and EN 681-1.
3.5 GRP/GRE Pipe
• GRP/GRE pipes, fittings and joints shall comply with the requirements of EN 14364
and EN 1796.
3.6 High Density Polyethylene (HDPE) Pipes and Fittings
• HDPE pipes, valves and fittings shall comply with the requirements of EN 12201 and
EN 681-1.
3.7 Ductile Iron Pipes and Fittings
• Ductile iron pipes and fittings shall comply with EN 545, EN 598 and EN 969
Note- Any other fixture, equipment ( If any) which is not mentioned above shall be selected as per a
Note- Local ugandan code , international standards and industry best practice shall be
Note- Proper Operating manuals and maintainance stretegy shall b
Note - All fixtures , equipment shall be installed in a standard way to avoid any any wasteg
Specification ref- UG-TIL-00-MDT1-800018- Architectural Specification for Building
efficient Plumbing fixtures/sanitary fixtures/valves/equipment/materials
Key
Detail Water conservation
No water used.
Proper collection and storage
which is not mentioned above shall be selected as per acceptable standard and on the basis of higher water efficiency.
rnational standards and industry best practice shall be refer for designing and sizes of plumbing system
Operating manuals and maintainance stretegy shall be applies for efficient operation.
e installed in a standard way to avoid any any wastege and spillage of water and requires less maintainance.
MDT1-800018- Architectural Specification for Building Materials Para-5.12, UG-TIL-00-MDT1-800009
044-100382
Key measures
Efficiency Health and environment remark
ater efficiency.
m
nance.