Professional Documents
Culture Documents
PDF Fire Exam
PDF Fire Exam
PDF Fire Exam
QUESTION 2
Correct
Score 1.00 out of 1.00
Question text
QUESTION 3
Correct
Score 1.00 out of 1.00
Flag the question
Question text
What should be the maximum distance to travel, from the furthest point
inside a building to any point on the evacuation route?
Select one:
A. 20m
B. 30m
C. 40m
D. 50m
Feedback
Your answer is correct.
Question text
Select some of the data that should appear in the record of the results of the
monthly fire extinguisher inspection.
1. Identified anomalies
2. Components of fire extinguishers
3. Review date
4. Number of fire caution signs found
Flag the question
TO. 1, 2, 3, 5
B. 1, 3, 5, 6
C. 2, 3, 5, 6
D. 2, 4, 5, 6
Feedback
Your answer is correct.
QUESTION 5
Incorrect
Rate 0.00 out of 1.00
Question text
TO. 1, 2, 5, 7
Relate both columns by selecting the type of fire detector that corresponds to the
characteristic described. 12
Match the columns, selecting the element that meets the characteristics described in the
statement. 41
d. 15, 30, 10 45
Feedback
Your answer is incorrect.
QUESTION 6
Incorrect
Rate 0.00 out of 1.00
Question text
pattern
Feedback
Your answer is incorrect.
THE CORRECT ANSWER IS: Apply the corresponding maintenance by trained
personnel
QUESTION 7
Incorrect
Rate 0.00 out of 1.00
Flag the question
Question text
These are some of the elements that the sketch of every work center must
contain.
1. Type of fire risk by area
2. Work center data
3. Type of activity and materials used in each area
4. Adjacent properties
5. Location of first aid materials
6. Evacuation routes
Select one:
Relate both columns by selecting the type of fire detector that corresponds to the
characteristic described. 12
Match the columns, selecting the element that meets the characteristics described in the
statement. 41
d. 15, 30, 10 45
B.
Feedback
Your answer is incorrect.
QUESTION 8
Incorrect
Rate 0.00 out of 1.00
Question text
A. three minute
B. Five minutes
C. seven minutes
D. Ten minutes
Feedback
Your answer is incorrect.
QUESTION 9
Incorrect
Rate 0.00 out of 1.00
Question text
Choose the current and correct information that should be on the fire
extinguisher label after each maintenance.
Select one: a. 1, 2, 3, 6 b. 1, 2, 4, 5 C. 2, 3, 4, 5
d. 2, 4, 5, 6
Feedback
Your answer is incorrect.
QUESTION 10
Incorrect
Rate 0.00 out of 1.00
Flag the question
Question text
These are the considerations that must be taken into account for the
selection and placement of fire detectors except :
Select one:
Choose the option that you consider correctly completes each statement.
To determine the risk of fire, you must identify the constructed area in
the inventory of combustible solids the sum of inventories the maximum inventory the minimum
inventory
Feedback
The correct answer is:
Choose the option that you consider correctly completes each statement.
To determine the risk of fire, you must identify the constructed area in square
meters and identify [the maximum inventory] that has been recorded over the
course of a year.
The general description of the production process, as well as the materials and
quantities used in said processes
Answer 1
17 -
The type of fire risk (ordinary or high)
Answer 2
The estimated maximum number of people from outside
18 -
the workplace who attend, such as contractors and
visitors. Answer 3
The breakdown of the maximum inventory that has been 14d
recorded over the course of a year, of the materials,
substances or products that are stored, processed and
handled in the work center, and the corresponding
classification in each case, as established in the Table
A.1 Answer 4
16 -
The maximum number of workers per work shift or,
where applicable, those located in premises, buildings
or levels of the work center
Answer 5
The constructed area in square meters 1 11 J.
Answer 6
The name, denomination, company name or specific
identification of the work center 13 -
Answer 7
The complete address of the work center 12 -
Feedback
The correct answer is:
The general description of the production process, as well as the materials and
quantities used in said processes
– 3,
The type of fire risk (ordinary or high)
– 9,
The estimated maximum number of people from outside the work center who
attend, such as contractors and visitors – 5,
The breakdown of the maximum inventory that has been recorded over the
course of a year, of the materials, substances or products that are stored,
processed and handled in the work center, and the corresponding classification
in each case, as established in the Table A.1
– 7,
The maximum number of workers per work shift or, where applicable, those
located in premises, buildings or levels of the work center
– 4,
The constructed area in square meters
– 6,
The name, denomination, company name or specific identification of the work
center
– 1,
The complete address of the work center
– 2,
The date of completion of the final determination of the fire risk – 10,
The name of the person(s) responsible for the risk classification carried out
– 11,
The calculation developed for the final determination of the fire risk –8
Among detectors of
this type, the most
used are those with
fixed temperature
and the most Answer 4 heat detectors
common are ordinary,
intermediate and high
temperature.
Feedback
The correct answer is:
The most used are those that use ionization and/or photoelectronic principles;
As a general rule, it is recommended to install a detector of this type for every 80
square meters of ceiling.
- smoke detectors,
For its selection and placement, it is recommended to carry out a technical study
due to the complexity of its selection.
– combustion gas detectors and flame detectors,
Its application must be based on a technical study and used in accordance with
the manufacturer's installation instructions
– other detectors,
Among detectors of this type, the most used are those with fixed temperature
and the most common are ordinary, intermediate and high temperature.
– heat detectors
The requirements to be considered to determine the number and location of the
detectors when there is an absence of people in the protected facilities are those
listed below, except :
Select one:
A. smoke density
B. the fire charge
These are some of the data that the fire risk classification document must
include, except:
Select one:
QUESTION 2
Correct
Question text
Choose the factors that need to be considered for the selection of fire
detectors.
1. Humidity
TO. 1, 2, 3, 5
B. 1, 3, 4, 6
C. 1, 3, 5, 6
D. 2, 4, 5, 6
Feedback
Your answer is correct.
QUESTION 3
Incorrect
Question text
For the installation of detectors, the maximum distance from any wall to the
first line of detectors may not exceed meters.
Select one:
Feedback
Your answer is incorrect.
QUESTION 4
Incorrect
Question text
When the height of the slab, ceiling or ceiling begins to increase from 3 m to
9 m, the space between the detectors:
Select one:
A. will begin to increase, since the distance the smoke or fire will travel will
be greater
C. will begin to reduce, since the distance the smoke or fire will travel will be
greater
D. will begin to reduce, since the distance the smoke or fire will travel will be
less
Feedback
Your answer is incorrect.
THE CORRECT ANSWER IS: it will begin to reduce, since the distance the smoke or
fire will travel will be greater
QUESTION 5
Incorrect
Rate 0.00 out of 1.00
Question text
In work centers classified as having a high fire risk, you must have:
Select one:
THE CORRECT ANSWER IS: detection means, alarms, equipment and systems
fixed against fire
QUESTION 6
Correct
Score 1.00 out of 1.00
Question text
Some roofs built with certain materials such as corrugated aluminum sheet,
when heated by the sun's rays, cool slowly, creating a thick zone and
creating a natural barrier against smoke, causing it to not be detected.
How is this phenomenon known?
Select one:
Feedback
Your answer is correct.
QUESTION 7
Incorrect
Question text
QUESTION 8
Correct
Score 1.00 out of 1.00
Question text
What is the recommended distance to place the detectors once the risk of
fire is assumed to be probable?
Select one:
THE CORRECT ANSWER IS: Away from the ceiling at least 0.30 m
QUESTION 9
Correct
Score 1.00 out of 1.00
Question text
Select the elements that must be considered to determine the risk of fire.
1. Builded surface
2. Inventory of fire extinguishers available
3. Frequency of drills
4. Maximum inventory of materials, substances or products
5. Inventory of combustible solids
6. Fire risk from flammable materials
Select one:
TO. 1, 2, 4, 5
B. 1, 4, 5, 6
C. 2, 3, 4, 5
D. 3, 4, 5, 6
Feedback
Your answer is correct.
Question text
These are the considerations that must be taken into account for the
selection and placement of fire detectors except :
Select one:
These are some of the data that the fire risk classification document must
include, except:
Select one:
THE CORRECT ANSWER IS: Date of the last maintenance of the fire fighting
equipment
QUESTION 2
Correct
Score 1.00 out of 1.00
Question text
Choose the factors that need to be considered for the selection of fire
detectors.
1. Humidity
2. Number of floors
3. Vibrations
4. Lightning
5. Temperature
6. air movement
Select one:
TO. 1, 2, 3, 5
B. 1, 3, 4, 6
C. 1, 3, 5, 6
D. 2, 4, 5, 6
Feedback
Your answer is correct.
Question text
For the installation of detectors, the maximum distance from any wall to the
first line of detectors may not exceed meters.
Select one:
A. 2.50
B. 3.50
C. 4.50
D. 5.50
Feedback
Your answer is incorrect.
QUESTION 4
Incorrect
Rate 0.00 out of 1.00
Flag the question
Question text
When the height of the slab, ceiling or ceiling begins to increase from 3 m to
9 m, the space between the detectors:
Select one:
A. will begin to increase, since the distance the smoke or fire will travel will
be greater
B. will begin to increase, since the distance the smoke or
THE CORRECT ANSWER IS: it will begin to reduce, since the distance the smoke or
fire will travel will be greater
QUESTION 5
Incorrect
Rate 0.00 out of 1.00
Question text
In work centers classified as having a high fire risk, you must have:
Select one:
A.hoses, alarms, fire extinguishers, mobile systems and fire detection
means
QUESTION 6
Correct
Score 1.00 out of 1.00
Question text
Some roofs built with certain materials such as corrugated aluminum sheet,
when heated by the sun's rays, cool slowly, creating a thick zone and
creating a natural barrier against smoke, causing it to not be detected.
How is this phenomenon known?
Select one:
A. Combustion
B. Stratification
C. Condensation
D. Sedimentation
Feedback
Your answer is correct.
QUESTION 7
Incorrect
Rate 0.00 out of 1.00
Question text
QUESTION 8
Correct
Score 1.00 out of 1.00
Question text
What is the recommended distance to place the detectors once the risk of
fire is assumed to be probable?
Select one:
THE CORRECT ANSWER IS: Away from the ceiling at least 0.30 m
QUESTION 9
Correct
Score 1.00 out of 1.00
Select the elements that must be considered to determine the risk of fire.
1. Builded surface
2. Inventory of fire extinguishers available
3. Frequency of drills
4. Maximum inventory of materials, substances or
products
5. Inventory of combustible solids
6. Fire risk from flammable materials
Select one:
TO. 1, 2, 4, 5
B. 1, 4, 5, 6
C. 2, 3, 4, 5
D. 3, 4, 5, 6
Feedback
Your answer is correct.
Question text
These are the considerations that must be taken into account for the
selection and placement of fire detectors except :
Select one:
Look at the following image and select the option that answers the question:
Which fire prevention and protection condition is not being met?
Select one:
A. Every work center must have normal and/or emergency exits that are
identified.
2002
Feedback
Your answer is incorrect.
The conditions of Free traffic or clear zone indicate that blocking fire
equipment and systems must be avoided and in the image the fire
extinguisher is blocked with the canisters.
THE CORRECT ANSWER IS: The blocking, damage, disabling or inappropriate use of
fire equipment and systems must be prohibited and avoided.
Match both columns, selecting the image that corresponds to the information
presented.
They are the signs that indicate the existence of explosive materials. Their
importance lies in the fact that, by knowing where there are these types of
materials, safety measures or procedures can be taken into account and
applied for the use of safety equipment.
heating, heaters, ovens, grills or other heat sources, and thus avoid fires
Feedback
Your answer is correct.
QUESTION 2
Incorrect
Score 0.0 out of 1.0
Question text
B. NOM-026-STPS-2008
C. NOM-003-SEGOB-2002
Feedback
Your answer is incorrect.
Click on the text that describes the security measure related to the image
presented, and drag it to the corresponding space.
• They are required to have a mechanism that allows them to be opened from the inside,
through a simple pushing operation. They must also be made of fire-resistant materials.
• They are important devices in evacuation routes, since they allow you to perceive the floor
and any modification to its surface.
• They must be located where there are the greatest number of workers, so that in the event
of a fire they can be used as an evacuation route.
• When they are exterior in a new workplace, any other type of openings should not represent
a risk factor.
• They should not be considered as an evacuation route and should not be used in the event
of fire.
Feedback
Your answer is partially correct.
You have selected correctly 3.
The correct answer is:
Read the following news item and choose the option that answers the
question posed at the end.
In Monterrey, a raging fire consumed the facilities of the “El porvenir” Yarn and
Fabric Factory, which also served as a warehouse for a significant amount of
products used to make clothing that, added to the materials with which it was
built, facilitated The rapid spread of the flames caused the factory to close
permanently in 2008. The administrative staff was trapped in their area since
they did not know where they should evacuate the facilities; several workers
suffered suffocation from the smoke when trying to leave the facilities. The fire
chief explained that the "chapopote" used as waterproofing in the warehouse
part caused the flames to spread across the roof area, causing this section to
collapse and making the action of the fire extinguishers even more difficult.
Likewise, the fire chief observed the lack of hydrants in the area, as well as
signs prohibiting smoking or indicating evacuation routes.
What conditions are related to the cause of the fire and its consequences?
Select one:
B. Failure to control stay and exit, use of badges and emergency exits
Feedback
Choose the fire prevention and protection conditions that workplaces must
have.
1. Safety measures for the use of fire extinguishers
2. Evacuation routes
3. Safety measures for the use of electricity
4. Instructions for conducting drills
5. Site plan and signage
6. Free traffic or clear zone
7. Security instructions
Select one:
TO. 1, 2, 3, 6, 7
Feedback
Your answer is correct.
QUESTION 2
Incorrect
Question text
Relate the elements that make up the safety instructions for fire protection
with their corresponding description.
QUESTION 3
Correct
Question text
Select one:
QUESTION 4
Correct
Score 1.00 out of 1.00
Question text
What does the fire prevention and protection condition of free transit or clear
zone refer to ?
Select one:
B. To eliminate any type of fire source from areas where fire detectors are not
installed.
QUESTION 5
Correct
Score 1.00 out of 1.00
Flag the question
Question text
B. 2, 3, 6
C. 2, 5, 6
D. 3, 5, 6
Feedback
Your answer is correct.
Question text
In which case should the doors be made of fire-resistant materials and
capable of preventing the passage of smoke?
Select one:
THE CORRECT ANSWER IS: When the work center is classified as having a high fire
risk
QUESTION 7
Correct
Score 1.00 out of 1.00
Question text
QUESTION 8
Incorrect
Question text
A. escalators
D. elevators
Feedback
Your answer is incorrect.
QUESTION 9
Correct
Question text
In what type of facilities is the use of safety containers that have a flame
arrester mandatory?
Select one:
Feedback
Your answer is correct.
THE CORRECT ANSWER IS: Liquefied gas, oil and/or natural gas
QUESTION 10
Incorrect
Rate 0.00 out of 1.00
Question text
A. three minute
B. Five minutes
C. seven minutes
D. Ten minutes
Feedback
Your answer is incorrect.
Answer 3
It is a system that fixed fire-fighting systems of the Hydraulics -
type of hydraulic networks that serve to propel
water must have.
Answer 4
It is an element or condition that fire suppression Sketch •
systems based on clean agents must meet, in
which the areas to be protected are indicated.
Answer 5
This feature of fixed fire systems allows testing of
the system without activating the fire suppression Pumping ▼
elements.
Answer 6
Area in which all ducts, the plenum of the hoods
and all devices must be protected through directed Store ▼
nozzles
It is a type of fixed automatic fire protection system, Answer 7
which is recommended for use in work areas with Sprayer -
high fire risk.
Feedback
The correct answer is:
This type of network must be closed circuit and maintain a minimum pressure
of 7 kg/cm2 throughout the network when the system is operating – Hydraulic,
- Store,
This feature of fixed fire systems allows testing of the system without
activating the fire suppression elements.
- Switch,
Area in which all ducts, the plenum of the hoods and all devices must be
protected through directed nozzles
- Kitchen,
Finish review
A. Category 4
B. Category 3
C. Category 2
D. Category 1
Feedback
The correct answer is: Category 3
QUESTION 2
Incorrect
Question text
A. Category 3
B. Category 4
C. Category 1
D. Category 2
Feedback
Question text
How often should dry chemical extinguishers with
external pressurized cartridges be tested?
Select one:
A. Every 12 years
B. Every 3 years
C. Every 5 years
D. Every year
Feedback
Every 12
The correct answer is:
years
Instructions : Look at the following table and select
the answer that correctly fills in the blank spaces.
Select one:
A. 23, 15, 10
B. 20, 40, 15
C. 30, 50, 20
d. 15, 30, 10
Feedback
Your answer is incorrect.
QUESTION 2
Correct
Rate 1.0 out of 1.0
Question text
At least one fire extinguisher must be placed for each ___ square meter
of surface, if the degree of risk is ordinary.
When the degree of risk is high, at least one fire extinguisher must be placed
for each _______square meters of surface or fraction.
Select one:
A. 200, 300
B. 300, 400
C. 300, 200
Very good! Remember that the placement of the fire extinguishers depends
on the fire risk with which the work area has been classified.
D. 250, 400
Feedback
Your answer is correct.
QUESTION 2
Correct
Question text
What are the categories that, as part of the inspection and maintenance of
fire extinguishers, must be verified that the instructions for use (mnemonics)
and type of fire are legible and correct. Otherwise, they must be replaced.
Select one:
A. Categories 2, 3
B. Categories 1, 2, 3,4, 5
C. Categories 1, 2, 3
D. Categories 3, 4, 5
Feedback
Feedback
Your answer is incorrect.
THE CORRECT ANSWER IS: Fire extinguishers based on carbon dioxide (CO2)
QUESTION 2
Incorrect
Rate 0.00 out of 1.00
Question text
Question text
What is the maximum distance at which mobile type fire extinguishers can be
located for high fire risk type and class B fire?
Select one:
A. 5m
B. 10m
C. 15 m
D. 20m
Feedback
Your answer is correct.
QUESTION 4
Correct
Score 1.00 out of 1.00
Flag the question
Question text
QUESTION 5
Incorrect
Rate 0.00 out of 1.00
Question text
QUESTION 6
Correct
Score 1.00 out of 1.00
Question text
In areas where the risk of fire is high, a fire extinguisher should be placed for
each __________________ square meter.
Select one:
Feedback
Your answer is correct.
QUESTION 7
A. annual - monthly
B. monthly weekly
C. six-yearly - annual
D. bimonthly - daily
Feedback
Your answer is incorrect.
QUESTION 8
Correct
Score 1.00 out of 1.00
Question text
In areas where the risk of fire is ordinary, a fire extinguisher must be placed
Rate 0.00 out of 1.00
for each ________________________square meter.
Select one:
Flag the question
TO. 200
Feedback
Your answer is correct.
QUESTION 9
Correct
Score 1.00 out of 1.00
Question text
Feedback
Your answer is correct.
QUESTION 10
Incorrect
Question text
TO. 1, 2, 5, 7
B. 1, 3, 4, 8
C. 1, 3, 6, 7
D. 2, 4, 5, 6
Feedback
Your answer is incorrect.
r
TRUE
to - .
Fake
Feedback
The appropriate response is 'False'
QUESTION 2
Correct
Rate 1.0 out of 1.0
Question text
r
TRUE
• -.
Fake
Feedback
The appropriate response is 'False'
QUESTION 3
Incorrect
Score 0.0 out of 1.0
Flag the question
Question text
TRUE
• -.
Fake
Feedback
The appropriate response is 'True'
QUESTION 4
Correct
Rate 1.0 out of 1.0
Question text
(5-
TRUE
• -l
Fake
Feedback
The appropriate response is 'True'
QUESTION 5
Correct
Rate 1.0 out of 1.0
Question text
c
TRUE
•-.
Fake
Feedback
The appropriate response is 'False'
QUESTION 6
Correct
Rate 1.0 out of 1.0
Question text
2
TRUE
c -I
Fake
Feedback
The appropriate response is 'True'
Select one:
pipe
as, Answer 1
hoses
and Check the pressure gauges, that they are free of physical damage and verify that all the nozzles
These are the aspects that must be reviewed Answer 2
Cleaning, battery replacement Operation of flame, heat and smoke detectors in alarms and fire
detectors
Answer 2
Cleaning, battery replacement Flame, heat and smoke detector operation
These are aspects to check in the pumping unit (diesel or
electric)
Feedback
The correct
Answer 3
answer is:
Check for leaks, spills or physical damage
high
Feedback
Question text
The program must be developed and applied by previously trained personnel and D by •
The annual program must consider the integrity of the elements of the installation and the
of the pipes.
Feedback
The program must be developed and applied by personnel previously trained and
[authorized] by [the employer]. If damage or deterioration is found in the facilities, they must
be subject to [maintenance].
An annual review program must be in place to identify and correct [unsafe conditions].
The annual program must consider the integrity of the installation elements and the pipe
[signaling].
Feedback
Your answer is correct.
QUESTION 2
Incorrect
Rate 0.00 out of 1.00
Feedback
Your answer is incorrect.
THE CORRECT ANSWER IS: From the installed equipment and environmental conditions
QUESTION 3
Incorrect
Question text
Choose the parts of the extinguishers that should be checked for perforations, breaks,
detachments or protuberances as part of the annual program.
1. Pressure gauge
2. Hoses
3. Nozzles
4. Bowl
5. Operating levers Select one:
A. 1, 3, 4
B. 1, 4, 5
C. 2, 3, 4
D. 2, 3, 5
Feedback
Your answer is incorrect.
Question text
The annual review program for liquefied petroleum and/or natural gas facilities must be
and applied by staff
previously _______________ and authorized by the ___________.
Select one:
QUESTION 5
Correct
Question text
It must be ensured that the fire extinguishers have a manometer needle indicating the
pressure in the area. ________________ In the case of fire extinguishers whose
container is permanently pressurized.
Select one:
A. red
B. green
C. dwelling
D. blue
Feedback
Your answer is correct.
QUESTION 6
Incorrect
Rate 0.00 out of 1.00
Question text
Select some of the data that should appear in the record of the results of the monthly fire
extinguisher inspection.
1. Identified anomalies
2. Components of fire extinguishers
Flag the question
3. Review date
4. Number of fire caution signs found
5. Monitoring of identified anomalies
6. Results of the monthly inspection of the fire extinguishers
Select one: a. 1, 2, 3, 5
B. 1, 3, 5, 6
C. 2, 3, 5, 6
D. 2, 4, 5, 6
Feedback
Your answer is incorrect.
Question text
These are data that the records of results of the annual review programs must have,
except:
Select one:
A. date of the review and details of those responsible for the review
QUESTION 8
Correct
Score 1.00 out of 1.00
Question text
Choose the current and correct information that should be on the fire extinguisher label
after each maintenance.
Select one: a. 1, 2, 3, 6
B. 1, 2, 4, 5
C. 2, 3, 4, 5
D. 2, 4, 5, 6
Feedback
Your answer is correct.
Question text
Choose the elements that the annual electrical installation review program must consider,
so that they are reviewed.
1. Pipelines
2. Overloads
3. hot spots
4. Alarms
5. Hydrants
6. Luminaires
Select one: a. 1, 4, 6
B. 1, 2, 5
C. 2, 3, 6
D. 2, 4, 6
Feedback
Your answer is correct.
QUESTION 10
Correct
Score 1.00 out of 1.00
Flag the question
Question text
What actions should be taken when damage or deterioration is found in liquefied petroleum
and/or natural gas facilities?
Select one:
THE CORRECT ANSWER IS: Apply the corresponding maintenance by trained personnel