Professional Documents
Culture Documents
08-JAN-2024 - MAR-E-0008 - Rev00 - Gypsum Ceiling & Partition System
08-JAN-2024 - MAR-E-0008 - Rev00 - Gypsum Ceiling & Partition System
08-JAN-2024 - MAR-E-0008 - Rev00 - Gypsum Ceiling & Partition System
R. S. DANTES
13-02-2023
ANNUAL REVIEW | 1
ISO Certified
9001 : 2015
Factory : +974 4460 1734 / Main off : +974 4468 4693 / Fax : +974 40379886
Email : info@qaprofil.com.qa / Website : www.qaprofil.com.qa
Slitting Line
Uncoiler Capacity :
1- Coil's Max Wt. : 9000 / Kgs.
2- Coil's Internal Diameter : 48cm - 55cm.
3- Coils Max Width : 1500mm.
Slitter Capacity :
1- Slitting Thickness Range : 0.30mm - 2.5mm.
2- Max No. of Slits : 40 pcs (Depending on the thickness).
3- Max Width of Mother Coil : 1500mm.
4- Width of the slit : 30mm - 450mm (Depending on the thickness).
Recoiler Capacity :
1- Coil's Max Wt. : 9000 / Kgs.
2- Coil's Internal Diameter : 50cm.
3- Coil's Max Width : 1500mm.
Fa
x:+97440379886
Specifications
Galvanized Steel
Thickness :
0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.0mm &1.2mm (Main channel & furring
channel) 0.5mm & 0.6mm (Other Products).
Pre-Painted Aluminium
A Dimensions / mm
A B Thickness Item's Name : Perimeter Angle
25 3000 0.5 - 0.6 Item's Code : QSGPA25
A
Perimeter Angle : Fixed at the perimeter of the desired area to level and carry the edges
of the Furring Channel .
Dimensions by mm.
A B C D E F G Thickness Length
30 44 64 0.45 - 0.6
35 11 49 69 5 1 22 0.45 - 1 3000
45 59 79 0.45 - 1
Furring Channel : It is a ceiling system Profile onto which the boards are screwed which
in turn is carried by the Main Channel mounted on its wings (B) and well connected
by wire connecting clips.
Main Channel
Dimensions by mm
A B C Thickness Length
38 - 45 11 3000 0.5 - 1 3000
Main Channel : The basic ceiling system profile mounted on the wings of the Furring Channel
attached to it by certain wire clips .
Angle Bead
Angle Bead
C
D
B A
Dimensions by mm
A B C D E F Thickness Length
26 30 3 1 6 4 0.45 - 0.6 3000
Angle Bead : A perforated angle, fixed at the two external meeting edges of the
plaster boards to provide the Maximum Protection and Reinforcement against
external impacts.
J-Trim
Dimensions by mm
A B C Thickness Length
27 12.5 17 0.45 - 0.6 3000
J-Trim : A pMaximum Protection and Reinforcement against external impacts. erforated J profile, fixed at the
edge of the plaster boards to provide the
Runner
Plastic grommet
for electrical
cables protection
Dimensions by mm from sharp metal
A B C Thickness Length
edge
26 48 31
51 34 Stud
63 46 0.45 - 0.6
Electrical cable
72 55
3000 Plasterboard
75 58 Runner
92 75 Screws
101 84 0.5 - 0.6
150 133
D E F G
8 5 4 2
Runner : Fixed to the ground and ceilings to support the studs to form the partition.
I I
E F G H I J K L
8 4 2 5 6 30 60 3000
Stud : Vertically fixed into the runner to be the support onto which the boards are mounted with self screws.
* Customized lengths are available .
Lintel
Th R
H
L
Dimensions by mm
Th W H L R
1.5 - 2 100 50 60 - 3000 2.5
150
200
Factory : +974 4460 1734 / Main off : +974 4468 4693 / Fax : +974 40379886
Email : info@qaprofil.com.qa / Website : www.qaprofil.com.qa
Specifications
Galvanized Steel
Thickness :
0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.0mm &1.2mm (Main channel & furring
channel) 0.5mm & 0.6mm (Other Products)
Pre-Painted Aluminium
Dimensions by mm
A B C D E F G H Thickness Length
84 12 19 45 4 7 16 46 0.5 - 0.6 4000
V Section : One type of Aluminum Strips Carriers used for carrying the Panel and Joint
aluminum ceilings systems where the Panel and Joint are clicked to it.
Qap Carrier
Qap strip
E
D
B
B
A Item's Name :Qap Carrier
Item's Code :QSGQC
A
C
Dimensions by mm C
A B C D E Thickness Length
36 21 5 100 4000 0.45 - 0.6 4000
Qap Carrier : Aluminum false ceilings strips carrier used for carrying the Qap 50, Qap
100 and Qap 200 strips.
Prepainted U Channel : A prepainted U shaped profile fixed on the perimeter of the walls
of the designated area as a leveling system into which the edges of Aluminum Strips are fixed.
Perimeter Angle : Fixed at the perimeter of the desired area to level and carry the edges of
the Aluminum strips of the false ceilings.
A D
B E
C
F
Item's Name : 84R Item's Name : Joint
Item's Code : QA8 Item's Code : QAJ
Dimensions / mm
A B C Thickness Length
16 80 84 0.43 4000 - 6000
134
184
D E F Thickness Length
15 13 19.5 0.27 4000 - 6000
84R Panel & Joint : One type of Aluminum Strips False Ceilings produced at QAPROFIL.
It is known as panel and joint.
Thickness Length
0.38 4000 - 6000
Qap 50 : A 41mm wide strips recessed with 9mm groove of 7.5mm deep. The ideal design
for wood imitation colors for aluminum false ceilings strips.
* Customized lengths are available .
Qap 100-200 Strips
B B E
A 0.5mm high concaved rib
clicked in underneath the
A C1 C2 D F embosed latch of the Qap
G Carriers as a technique to attach
I1 I2 H this kind of aluminum strips to
their carriers.
J1 J2 Width
Dimensions / mm Actual Effective
A B C1 C2 D E F G H I1 I2 J1 J2
18 15 95 105 3 0.5 4 1 8 107 207 100 200
Thickness Length
0.45 4000 - 6000 Remark : C1, I1 and J1 refers to Qap100 and C2,I2 and J2 refers to Qap200.
Qap 100, 200: 80mm (Qap 100) and 180mm (Qap 200) wide strips recessed with a
groove of (20mm top and 12mm bottom). The ideal design of wood imitation colors for
aluminum false ceilings strips.
* Customized lengths are available .
T- Bar Suspension System
T- Bar Suspension System
Dimensions / mm E
A B C D E Thickness
22 38 24 24 24 0.3
Semi-Round and 184R
Dimensions by mm
Th A B C
0.43 5 67 77
Factory : +974 4460 1734 / Main off : +974 4468 4693 / Fax : +974 40379886
Email : info@qaprofil.com.qa / Website : www.qaprofil.com.qa
Mobile Toilet
Office Cabins
Guard Hut
Fa
x:+97440379886
Specifications
Galvanized Steel
Thickness :
0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.0mm &1.2mm (Main channel & furring
channel) 0.5mm & 0.6mm (Other Products)
Pre-Painted Aluminium
Th
J K
Dimensions / mm.
A B C D E F G H I J K
960 176 20 50 40 2 240 37 40 62 1010
L M Th
40 Costumized 0.30 - 0.6
* Customized lengths are available .
Wave Roof Tile Sheet
C C C C
Dimensions / mm.
A B C D E Th.
930 828 207 20 Customized 0.35 - 0.6
F
D E
Dimensions / mm.
A B C D E F G Th.
1115 950 190 112 78 30 Customized 0.35 - 0.6
Dimensions / mm.
A B C D E Thickness Length
230 180 66 78 28 0.3 - 0.7 Customized
A
Item's Name : Down Spout 105 X 73
Item's Code : QSGDS105-73
D
90o C
Dimensions / mm.
A B CD Thickness
o o
105 73 90 -180 0.45 - 0.6