Professional Documents
Culture Documents
Fungsi Dari Crimping
Fungsi Dari Crimping
adalah... .
A.
Memotong kabel
B.
Mengelupas kabel
C.
Meratakan kabel
D.
Mengunci konektor
E.
2.
Pada pemasangan kabel straight, pin yang digunakan untuk
mengirim ( transferring ) data adalah... .
o
A.
1 dan 2
B.
6 dan 8
C.
4 dan 5
D.
3 dan 6
E.
3 dan 8
Correct Answer
A. 1 dan 2
Explanation
In a straight cable, pins 1 and 2 are used for transferring data.
Rate this question:
3.
Pemasangan kabel secara straight pada kabel UTP digunakan
untuk menghubungkan... .
A.
B.
C.
D.
E.
4.
Konektor yang digunakan oleh media kabel Unshield Twisted Pair
adalah... .
A.
RJ-11
B.
RJ-45
C.
TNC
o
D.
BNC
E.
NIC
Correct Answer
B. RJ-45
Explanation
The correct answer is RJ-45. RJ-45 connectors are commonly used
for Unshielded Twisted Pair (UTP) cables, which are widely used in
Ethernet networking. These connectors have 8 pins and are
designed to securely connect the twisted pairs of wires in the UTP
cable to a network device, such as a computer or a switch. RJ-45
connectors are also used for terminating Ethernet cables, making
them a suitable choice for connecting devices in a local area network
(LAN).
Rate this question:
5.
Kombinasi pengkabelan straight pada jaringan komputer yang
sesuai dengan standart internasional adalah....
A.
White orange, orange, white green, blue, white blue, green, white
brown, brown
B.
White orange, orange, white green, green, white blue, blue, white
brown, brown
C.
Green, White green, white orange, blue, white blue, orange, white
brown, brown
o
D.
White orange, orange, white green, green - white blue, blue, white
brown, brown
E.
Orange, white orange, green, white green, white blue, blue, white
brown, brown
Correct Answer
A. White orange, orange, white green, blue, white blue, green, white
brown, brown
Explanation
The correct answer is White orange, orange, white green, blue, white
blue, green, white brown, brown. This answer follows the standard
international wiring color code for straight cable connections in
computer networks. The colors are arranged in the correct order
according to the T568A or T568B standard, which ensures
compatibility and consistency in network installations.
Rate this question:
6.
Repeater dipasang jika jarak kabel UTP sudah lebih dari... .
A.
100 m
B.
200 m
C.
300 m
D.
400 m
o
E.
500 m
Correct Answer
A. 100 m
Explanation
A repeater is installed when the distance of the UTP cable exceeds
100 meters. This is because UTP cables have a limited range of
transmission, and beyond a certain distance, the signal strength
starts to degrade. A repeater is used to amplify and regenerate the
signal, allowing it to travel further without losing quality. Therefore, if
the cable distance is more than 100 meters, a repeater is necessary
to ensure proper signal transmission.
Rate this question:
7.
Permasalahan yang mungkin terjadi pada kabel jenis UTS adalah
berikut ini, kecuali... .
A.
Kabel bengkok
B.
Konektor longgar
C.
D.
Kabel terbuka
E.
Kabel kependekan
Correct Answer
C. Crimping kabel kurang pas
Explanation
Pada kabel jenis UTS, permasalahan yang mungkin terjadi adalah
kabel bengkok, konektor longgar, kabel terbuka, dan kabel
kependekan. Crimping kabel kurang pas bukanlah permasalahan
yang terjadi pada kabel jenis UTS.
Rate this question:
8.
Pada pemasangan kabel straight, pin yang digunakan untuk
menerima ( receiving ) data adalah...
A.
1 dan 2
B.
6 dan 8
C.
4 dan 5
D.
3 dan 6
E.
3 dan 8
Correct Answer
D. 3 dan 6
Explanation
In a straight cable, pins 3 and 6 are used to receive data.
Rate this question:
9.
Pada kabel UTP Tujuan dililitkannya satu kabel dengan yang lain
( Twisted ) adalah untuk... .
A.
B.
C.
Memudahkan pemasangan
D.
E.
10.
Alat bantu dalam pemasangan konektor RJ-45 ke kabel UTP,
kecuali... .
A.
Crimping tools
B.
LAN Taster
C.
Gunting
D.
E.
Akses point
Correct Answer
E. Akses point