(7) HD bolts shall be of sufficient length to ensure that a
minimum of two threads project above the upper nut
after tightening.
2.14 Abbreviations
A list of suitable abbreviations for the economic use of
space on drawings is given in Table 2.2.
Table 2.2 List of abbreviations.
Description Abbreviate on drawings
Overall length O/A Unless otherwise noted UON Diameter DIA or Φ Long LG Radius r or RAD Vertical VERT Mark MK Dimension DIM Near side, far side N SIDE, F SIDE Opposite hand OPP HAND Centre to centre C/C Centre-line C/L Horizontal HORIZ Drawing DRG Not to scale NTS Typical TYP Nominal NOM Reinforced concrete RC