Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

TL-250M-5-10101

TL-250M-5-20101

TOTAL RATED LOADS

Unit:ton

360゜ : Outriggers fully extended (6.1m) + Front jack


Over the sides : Outriggers fully extended (6.1m)
Over the rear : Outriggers fully extended (6.1m)
Outriggers middle extended (4.0m)
Outriggers minimum extended (2.08m)
Over the front : Outriggers fully extended (6.1m) + Front jack
Outriggers middle extended (4.0m) + Front jack

A
10.5m 14.2m 18.0m 21.7m 25.5m 29.2m 33.0m
B
3.0m 25.00 20.00 16.00
3.5m 25.00 20.00 16.00 12.00
4.0m 22.90 20.00 16.00 12.00 11.50
4.5m 21.00 20.00 16.00 12.00 11.50
5.0m 19.40 18.40 16.00 12.00 11.50 9.00
5.5m 17.70 16.80 14.75 12.00 11.50 9.00 7.00
6.0m 16.20 15.30 13.70 12.00 11.50 9.00 7.00
7.0m 13.70 12.65 11.95 11.00 10.00 9.00 7.00
8.0m 11.40 10.65 10.55 10.20 8.90 8.20 7.00
9.0m 8.85 8.75 9.20 8.05 7.45 6.25
10.0m 7.20 7.10 7.50 7.30 6.75 5.70
12.0m 5.00 4.90 5.25 5.60 5.65 4.80
14.0m 3.50 3.85 4.15 4.30 4.10
16.0m 2.50 2.85 3.15 3.30 3.40
18.0m 2.15 2.40 2.55 2.65
20.0m 1.60 1.85 2.00 2.10
22.0m 1.40 1.55 1.65
24.0m 1.20 1.30
26.0m 0.90 1.00
28.0m 0.75
30.0m 0.50
θ(°) 0∼80 0∼80 0∼80 0∼80 0∼80 0∼80 0∼80

A= Boom length B= Working radius


θ= Boom angle range (for the unladen condition)

- 229 -
TL-250M-5-10101
TL-250M-5-20101

WORKING RADIUS - LIFTING HEIGHT

JI
B

JI
B

LIFTING HEIGHT (m)


BO
OM

BO
OM

BO
OM

BO
OM

BO
OM

BO
OM
BO
OM

WORKING RADIUS (m)

NOTES:
1. The deflection of the boom is not incorporated in the figure above.
2. The above chart is for the case where the outriggers are fully extended and where the front jacks are used (over
360゜).

- 234 -

You might also like