Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578...

Page 1 of 7

Shutdown SIS

Previous Screen

Product: WHEEL LOADER


Model: 950H WHEEL LOADER MXL00337
Configuration: 950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine

Troubleshooting
950H Wheel Loader and 962H
Wheel Loader Power Train
Media Number -UENR0795-00 Publication Date -01/07/2012 Date Updated -12/07/2012

i04794975

Diagnostic Trouble Codes


SMCS - 7569

The following table lists the diagnostic codes for the Machine Control (MID 81). When a diagnostic
code becomes active, refer to the Troubleshooting section of this manual for a specific
troubleshooting procedure.

Component Identifier (CID) and Failure Mode Identifier


Information
Table 1
Diagnostic Trouble Codes For Transmission ECM (MID 81)
DTC Description Refer to Test Procedure
41-3 8 VDC Supply : Voltage Above Normal Sensor Supply - Test
41-4 8 VDC Supply : Voltage Below Normal Sensor Supply - Test
168-0 Battery Voltage: Data valid but above normal
Electrical Power Supply - Test
operational range
168-1 Battery Voltage: Data valid but below normal
Electrical Power Supply - Test
operational range
177-3 Transmission Oil Temperature Sensor: Voltage Sensor Signal (Analog, Passive) -
above normal or shorted high Test
177-4 Transmission Oil Temperature Sensor: Voltage Sensor Signal (Analog, Passive) -
below normal or shorted low Test
Cat Data Link - Test

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 2 of 7

190-2 Engine Speed Sensor : Erratic, Intermittent, or


Incorrect
268-2 Programmed Parameter Fault: Erratic, Intermittent,
or Incorrect
367-3 Ride Control Switch: Voltage above normal or Operator Control Switch (Switch to
shorted high Ground) - Test
368-3 Transmission Auto/Manual Switch: Voltage above Operator Control Switch (Switch to
normal or shorted high Ground) - Test
368-4 Transmission Auto/Manual Switch: Voltage below Operator Control Switch (Switch to
normal or shorted low Ground) - Test
444-3
Starter Motor Relay : Voltage Above Normal Relay - Test

444-5
Starter Motor Relay : Current Below Normal Relay - Test

444-6
Starter Motor Relay : Current Above Normal Relay - Test

562-2 Caterpillar Monitoring System: Data erratic,


Cat Data Link - Test
intermittent, or incorrect.
562-9 Caterpillar Monitoring System: Abnormal update.
Cat Data Link - Test

562-14 Caterpillar Monitoring System: Special Instruction.


Cat Data Link - Test

585-8 Transmission Output Speed Sensor 1: Abnormal


Speed Sensor - Test
Frequency, Pulse Width, or Period
CAN Data Link - Test or
590-2 Engine Control Module: Data erratic, intermittent, Cat Data Link - Test
or incorrect. Refer to the CID 247 or 248 for
the correct procedure.
CAN Data Link - Test or
590-9 Cat Data Link - Test
Engine Control Module: Abnormal Update
Refer to the CID 247 or 248 for
the correct procedure.
CAN Data Link - Test or
590-14 Engine Control Module: Engine Control Module : Cat Data Link - Test
Abnormal Update Rate Refer to the CID 247 or 248 for
the correct procedure.
596-2 Implement Control Module: Data erratic, CAN Data Link - Test or
intermittent, or incorrect. Cat Data Link - Test

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 3 of 7

Refer to the CID 247 or 248 for


the correct procedure.
CAN Data Link - Test or
596-9 Cat Data Link - Test
Implement Control Module: Abnormal Update
Refer to the CID 247 or 248 for
the correct procedure.
CAN Data Link - Test or
596-14 Cat Data Link - Test
Implement Control Module: Special Instruction.
Refer to the CID 247 or 248 for
the correct procedure.
621-3 Operator Control Switch (Switch to
Downshift Switch: Voltage Above Normal
Ground) - Test
621-4 Operator Control Switch (Switch to
Downshift Switch: Voltage Below Normal
Ground) - Test
622-3 Operator Control Switch (Switch to
Upshift Switch: Voltage Above Normal
Ground) - Test
622-4 Operator Control Switch (Switch to
Upshift Switch: Voltage Below Normal
Ground) - Test
623-3 Operator Control Switch (Switch to
Directional Switch: Voltage Above Normal
Ground) - Test
623-4 Operator Control Switch (Switch to
Directional Switch: Voltage Below Normal
Ground) - Test
627-3 Operator Control Switch (Switch to
Parking Brake Pressure Switch
Ground) - Test
627-4 Operator Control Switch (Switch to
Parking Brake Pressure Switch
Ground) - Test
637-3
Backup Alarm: Voltage Above Normal Alarm - Test

637-5
Backup Alarm: Current Below Normal Alarm - Test

637-6
Backup Alarm: Voltage Above Normal Alarm - Test

668-3 Transmission Shift Lever Switch: Voltage Above Operator Control Switch (Switch to
Normal Ground) - Test
668-4 Transmission Shift Lever Switch: Voltage Below Operator Control Switch (Switch to
Normal Ground) - Test
672-8 Torque Converter Output Speed Sensor: Abnormal Speed Sensor - Test
Frequency, Pulse Width, or Period

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 4 of 7

673-8 Transmission Output Speed Sensor: Abnormal


Speed Sensor - Test
Frequency, Pulse Width, or Period
702-3 Gear Lever Select Switch Sensor: Voltage Above Operator Control Switch (Switch to
Normal Ground) - Test
702-4 Gear Lever Select Switch Sensor: Voltage Below Operator Control Switch (Switch to
Normal Ground) - Test
737-3 Left Brake Pedal Position Sensor: Voltage Above
Sensor Signal (PWM) - Test
Normal
737-4 Left Brake Pedal Position Sensor: Voltage Below
Sensor Signal (PWM) - Test
Normal
737-8 Left Brake Pedal Position Sensor: Abnormal
Sensor Signal (PWM) - Test
Frequency, Pulse Width, or Period
737-13 Left Brake Pedal Position Sensor: Out of
Sensor Signal (PWM) - Test
Calibration
793-3 Pressure Switch (Primary Steering): Voltage Condition Switch (Two Wire) -Test
Above Normal
793-4 Pressure Switch (Primary Steering): Voltage Condition Switch (Two Wire) -Test
Below Normal
794-3 Pressure Switch (Secondary Steering): Voltage Condition Switch (Two Wire) -Test
Above Normal
794-4 Pressure Switch (Secondary Steering): Voltage Condition Switch (Two Wire) -Test
Below Normal
794-7 Pressure Switch (Secondary Steering): Not Condition Switch (Two Wire) -Test
Responding
795-7 Secondary Steering Intermediate Relay: Not
Relay - Test
Responding
967-2 Machine Application: Data erratic, intermittent, or
Cat Data Link - Test
incorrect
967-9
Machine Application: Abnormal Update Cat Data Link - Test

967-12
Machine Application: Bad Component Cat Data Link - Test

1326-2 ECM Location Code: Data erratic, intermittent, or


ECM Location Code - Test
incorrect
1401-3 Transmission Solenoid 1 : Voltage Above Normal
Solenoid Valve - Test

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 5 of 7

1401-5 Transmission Solenoid 1 : Current Below Normal Solenoid Valve - Test

1401-6 Transmission Solenoid 1 : Current Above Normal


Solenoid Valve - Test

1401-
Transmission Solenoid 1: Calibration Required Solenoid Valve - Test
13
1402-3 Transmission Solenoid 2: Voltage Above Normal
Solenoid Valve - Test

1402-5 Transmission Solenoid 2: Current Below Normal


Solenoid Valve - Test

1402-6 Transmission Solenoid 2: Current Above Normal


Solenoid Valve - Test

1402-
Transmission Solenoid 2: Calibration Required Solenoid Valve - Test
13
1403-3 Transmission Solenoid 3: Voltage Above Normal
Solenoid Valve - Test

1403-5 Transmission Solenoid 3: Current Below Normal


Solenoid Valve - Test

1403-6 Transmission Solenoid 3: Current Above Normal


Solenoid Valve - Test

1403-
Transmission Solenoid 3: Calibration Required Solenoid Valve - Test
13
1404-3 Transmission Solenoid 4: Voltage Above Normal
Solenoid Valve - Test

1404-5 Transmission Solenoid 4: Current Below Normal


Solenoid Valve - Test

1404-6 Transmission Solenoid 4: Current Above Normal


Solenoid Valve - Test

1404-
Transmission Solenoid 4: Calibration Required Solenoid Valve - Test
13
1405-3 Transmission Solenoid 5: Voltage Above Normal
Solenoid Valve - Test

1405-5 Transmission Solenoid 5: Current Below Normal


Solenoid Valve - Test

1405-6 Transmission Solenoid 5: Current Above Normal


Solenoid Valve - Test

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 6 of 7

1405- Transmission Solenoid 5: Calibration Required Solenoid Valve - Test


13
1406-3 Transmission Solenoid 6: Voltage Above Normal
Solenoid Valve - Test

1406-5 Transmission Solenoid 6: Current Below Normal


Solenoid Valve - Test

1406-6 Transmission Solenoid 6: Current Above Normal


Solenoid Valve - Test

1406-
Transmission Solenoid 6: Calibration Required Solenoid Valve - Test
13
1960-9
Ignition Key Reader : Abnormal Update Rate CAN Data Link - Test

2129-3 Ride Control Solenoid 1: Voltage Above Normal


Solenoid Valve - Test

2129-5
Ride Control Solenoid 1: Current Below Normal Solenoid Valve - Test

2129-6
Ride Control Solenoid 1: Current Above Normal Solenoid Valve - Test

2274-3 Transmission Direction Switch 2: Voltage Above Condition Switch (Two Wire) -Test
Normal
2274-4 Transmission Direction Switch 2: Voltage Below Condition Switch (Two Wire) -Test
Normal
2347-3 Ride Control Solenoid 2: Voltage Above Normal
Solenoid Valve - Test

2347-5
Ride Control Solenoid 2: Current Below Normal Solenoid Valve - Test

2347-6
Ride Control Solenoid 2: Current Above Normal Solenoid Valve - Test

2825-3 Axle Oil Cooler Solenoid: Voltage Above Normal


Relay - Test

2825-5 Axle Oil Cooler Solenoid: Current Below Normal


Relay - Test

2825-6 Axle Oil Cooler Solenoid: Current Above Normal


Relay - Test

Copyright 1993 - 2024 Caterpillar Inc. Tue May 14 21:53:48 UTC+0530 2024
All Rights Reserved.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024
950H Wheel Loader MXL00001-UP (MACHINE) POWERED BY C7 Engine(SEBP578... Page 7 of 7

Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 5/14/2024

You might also like