Professional Documents
Culture Documents
OU500567770 0 PSI300i Services and Spare Parts
OU500567770 0 PSI300i Services and Spare Parts
This document is proprietary to Outotec Oyj and its affiliated companies (“Outotec”). This document is intended for the use of Outotec's customers only for the purposes of the
agreement under which the document is submitted and no ownership rights are hereby transferred. No part of the document shall be used, reproduced, translated, converted,
adapted, stored in a retrieval system, communicated or transmitted by any means, for any commercial purpose, including without limitation, sale, resale, licence, rental or lease,
without the prior express written consent of Outotec.
Customer understands and accepts that the information in this document is subject to any change without notice. It is the customer's responsibility to determine whether there have
been any such updates or amendments.
The document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Despite the fact that every
effort has been made to ensure that the information in this document is accurate Outotec does not make any representations, warranties or guarantees, express or implied, as to the
accuracy or completeness of the document. In case of any discrepancies between different language versions English version shall prevail. Outotec shall not be liable in contract, tort
or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or expense of any nature, including without limitation incidental, special, direct or
consequential damages arising out of or in connection with the use of the document. Outotec's liability for any errors in the document is limited to the documentary correction of
errors.
Other product names mentioned in this document may be trademarks of their respective companies, and they are mentioned for identification purposes only.
Outotec Oyj
Internet: www.outotec.com
04
03
02
01
00 HKK 26.1.2015 KPI 23.6.2015 JKY 23.6.2015 New document created
Rev Name Date Name Date Name Date Revision Text
Prepared Checked Released
Status: Original Size:
Document Title:
IOMS MANUAL
PSI 300I
Language: EN
Contents
Contents ............................................................................................................................. 3
Outotec services are designed to optimize the customers’ plants and processes.
Depending on the technology concerned, these services cover everything from spare
parts support and delivery, site and equipment maintenance and plant audits to
optimization and upgrades, project management, and training.
Should you have any questions regarding our products or services, please contact your
nearest Outotec Service Center or our head office (www.outotec.com/services).
For a listing of spare parts, refer to the eCatalogue or the printed Spare Part Book
provided separately.
Personnel replacing parts for analyzer should have at least a basic maintenance
technician training.
Identification of spare parts is easy using the eCatalogue or the printed Spare Part Book
delivered to you with your equipment.
When ordering spare parts or making enquiries, please provide the following information
to your closest Outotec Service Center:
Specifying this data ensures that you receive the correct information or the required
spare parts.
NOTE: Please request for a spare parts recommendation from your nearest Outotec
Service Center.
Training services: Outotec offers training services to ensure safe and effective operation
and maintenance of the customer's assets. The Following training modules are available:
Module A: Introduction and operation - Operating principles and settings of the analyzer
Module B: Maintenance - Basic activities and intervals for maintaining the equipment
1.5 Modernizations
During equipment lifecycle the needs might change, the equipment performance might
decrease or there might be some further development of the technology in question.
Outotec Modernization Solutions offer services to either refurbish product back to the
original performance level or to upgrade it to meet new targets.
When ordering services or making enquiries, please provide the following information to
your closest Outotec Service Center:
Specifying this data ensures that you receive the correct information of the required
services.