Professional Documents
Culture Documents
Bonded Semi-Con - CWB
Bonded Semi-Con - CWB
1- Cable preparation
Clean up the cable.
Do not apply silicon grease over the
bonded semi-conductor.
3
4
Place the tool on the cable.
Tighten the tool by screwing the red knob (3).
Set, and adjust the penetration of the blade
according to the thickness of the bonded semi-
conductor with the button (4)
Turn the tool clockwise until the tool reaches the
outer sheath.
ALROC S.A.S – ZI de la Fonderie – 72160 TUFFE – FRANCE – Tél : 02.43.71.11.80 – Fax : 02.43.71.16.51
Internet :www.alroc.fr – E.mail :commercial@alroc.fr – info@alroc.fr
S.A.S au capital de 800000€ – 341 050 987 RCS LE MANS – SIRET 341 050 987 00013 – APE 2453Z – TVA/FR 77 341 050 987
Edition 03/ 2014 /A0 – Noncontractual illustrations