Professional Documents
Culture Documents
GRINNELL G-FIRE Gasket Service Recommendations For Fire Grooved Products - TFP1895 - 08 - 2022
GRINNELL G-FIRE Gasket Service Recommendations For Fire Grooved Products - TFP1895 - 08 - 2022
www.tyco-fire.com
Contacts
docs.jci.com/tycofire/tfp1895 Technical
Data
General This section provides technical data for
Description these gaskets:
• Standard “C” Shape Pre-Lubricated
Gaskets for fire protection services are
Grade “A” EPDM Gaskets
provided in Pre-Lubricated Grade “A”
EPDM or Grade “E” EPDM. • Center-Stop, Push-On Pre-Lubri-
cated Grade “A” EPDM Gaskets
NOTICE Sizes
• Grade “E” EPDM Gaskets 1 to 12 Inch (DN25 to DN300)
Never remove any piping component • Tri-Seal Grade “E” EPDM Gaskets
nor correct or modify any piping defi- Approvals
ciencies without first de-pressurizing Proper pipe end preparation and groov- UL and ULC Listed
ing are mandatory to prevent leakage. FM Approved
and draining the system. Failure to do
For steel and other IPS pipe, refer to VdS Approved
so may result in serious personal injury, LPCB Certified
property damage, and/or impaired Technical Data Sheet TFP1898 for roll
device performance. and cut groove specifications. The
gasket seat surface must be free from NOTICE
It is the designer’s responsibility score marks, ridges, indentations, pro-
to select products suitable for the Standard C-Shape Grade “A” gaskets
jections, loose paint, flaking galvaniz- are not UL and ULC Listed for dry pipe
intended service and to ensure that ing, scale, dirt chips, grease, rust, etc.
pressure ratings and performance systems
which would prevent a positive seal.
data are not exceeded. Verify material Gasket
and gasket selection for compatibility Standard “C” Pre-Lubricated Grade Pre-Lubricated Grade “A” EPDM
with the specific application. Always “A” EPDM Gaskets Gaskets, Violet color coded, have a
read and understand the installation Pre-Lubricated Grade “A” EPDM temperature rating of -30 to 150°F
instructions. Gaskets are provided with a proprie- (-34 to 66°C).
tary coating that eliminates the need for
installers to apply a lubricant during the
assembly process.
“A”
Pre-Lubricated -30°to 150°F Fire Protection Systems:
EPDM Violet
Standard “C” (-34°C to 66°C) Not recommended for hot water systems
Shape
“A” Fire Protection Systems:
Powder-Lubricated -30°to 150°F EPDM Violet Can be used for dry pipe or freezer systems,
Center-Stop, (-34°C to 66°C) Not recommended for hot water systems
Push-On
“A” Fire Protection Systems:
Self-Lubricating -30°to 150°F EPDM Double Violet Can be used for dry pipe or freezer systems,
Center-Stop (-34°C to 66°C) Not recommended for hot water systems
Push-On
-30°F to 230°F
“E” EPDM Green Fire Protection Systems
(-34°C to 110°C)
TABLE A
GENERAL GASKET SERVICE RECOMMENDATIONS
Center-Stop, Push-On Pre- Grade “E” EPDM Gaskets Tri-Seal Grade “E” EPDM Gaskets
Lubricated Grade “A” EPDM Couplings, Mechanical Tees, Figure The Tri-Seal Gasket differs from stan-
Gaskets (for Figure 579 couplings 40-5 Straps, Figure 71 Flange Adapt- dard gaskets by closing off the gap
only) ers, and Figure 716 Reducing Cou- between the pipes or gasket cavity.
Figure 579 couplings are provided with plings are provided with Grade “E” This closure is accomplished by posi-
a Pre-Lubricated Grade “A” EPDM EPDM Gaskets. tioning the center “rib” of the gasket
Gasket eliminating the need for install- over the gap between the pipes. The
Sizes
ers to apply a lubricant during the Tri-Seal Gasket has two tapered sealing
1 to 12 Inch (DN25 to DN300)
assembly process. These gaskets are edges, in addition to the center rib, for
slightly over-sized for ease of installa- Approvals additional strength and sealing. These
tion and have a center leg that acts as a UL and ULC Listed gaskets are used primarily for dry pipe
stop to ensure correct placement of the FM Approved fire protection systems, freezer appli-
gasket. They are approved for all types VdS Approved cations, and vacuum services greater
of fire protection systems including dry LPCB Certified than 10˝ Hg.
pipe, freezer applications, and vacuum Sizes
services greater than 10˝ Hg. NOTICE 1 to 12 Inch (DN25 to DN300)
Sizes For dry pipe and freezer applications,
the addition of a petroleum free silicone Approvals
2 to 8 Inch (DN50 to DN200) UL and ULC Listed
lubricant is required.
Approvals FM Approved
UL and ULC Listed Gasket VdS Approved
FM Approved Grade “E” EPDM Gaskets, Green color LPCB Certified
VdS Approved coded, have a temperature rating of Gasket
LPCB Certified -30 to 230°F (-34 to 110°C). Tri-Seal Grade “E” EPDM Gaskets,
Green color coded, have a temperature
NOTICE NOTICE rating of -30 to 230°F (-34 to 110°C).
For dry pipe and freezer applications, Figure 716 Reducing Couplings, which Dry Pipe and Freezer Applications
the addition of a petroleum free lubri- use Grade “E” EPDM Gaskets, are not The Center-Stop, Push-On Gasket with
cant is required. recommended for dry pipe and freezer the GRINNELL G-FIRE Figure 579 Cou-
applications. pling or the Tri-Seal Gasket with a rigid
Gaskets:
Powder-Lubricated Grade “A” EPDM coupling such as a GRINNELL G-FIRE
Gaskets, Violet color coded, have a Figure 577 Coupling are the best choice
temperature rating of -30 to 150°F for dry pipe and freezer systems. Such
(-34 to 66°C). systems are unique applications that
benefit from proper pipe preparations,
Self-Lubricating Grade “A” EPDM a gasket with a center leg/rib, and the
Gaskets, Double Violet color coded, use of a petroleum-free silicone-based
have a temperature rating of -30 to lubricant. Standard lubricant is not rec-
150°F (-34 to 66°C). ommended for these applications as it
may freeze and has reduced lubrication
properties at low temperatures.
TFP1895
Page 3 of 4
Standard Gasket: The standard style gasket, with a “C” Reducing Coupling Gasket: This gasket is provided with
shape configuration, is the most commonly used. ribs used to position the larger pipe so that the sealing lip
is located on the sealing surface of the pipe. This gasket
is used only with the GRINNELL Figure 716 Reducing
Coupling.
Tri-Seal Gasket: This gasket is designed to close off the Flange Adapter Gasket: This gasket is specifically
gap or gasket cavity. This is accomplished by positioning designed for use with GRINNELL Flange Adapters. The
the center “rib” of the gasket over the gap between the gasket has an optimal amount of rubber to provide a
pipes. The tri-seal gasket has two tapered sealing edges dependable seal between both the pipe and mating
in addition to the center rib for additional strength and surface.
sealing. This gasket is suitable for dry pipe and freezer
systems.
FIGURE 1
GRINNELL GASKET STYLES
TFP1895
Page 4 of 4
NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;
Worldwide
www.tyco-fire.com
Contacts
TFP1895
Change History Appendix
Page 1, added QR code and URL to allow convenient access to electronic version from printed docu-
ment; Page 4, changed corporate address and telephone number to 1467 Elmwood Avenue, Cranston,
08-22
RI 02910 | Telephone +1-401-781-8220, formerly 1400 Pennbrook Parkway, Lansdale, PA 19446 | Tele-
phone +1-215-362-0700.
Added QR code and URL to allow convenient access to electronic version from printed document; Added
01-22
Grade A self-lubricating center-stop push-on gaskets, distinguished by double violet stripe color-code.
Updated Grinnell® branding and document format; Added Johnson Controls copyright; Added dis-
08-18 claimer stating specifications and information subject to change without notice; Added reference to
Regulatory and Health Warning Technical Data Sheet TFP2300.
Added Figure 579 One-Bolt Coupling with Grade A EPDM Center-Stop, Push-On Gasket, suitable for
02-18 dry pipe and freezer systems; Removed obsolete Figure 640 and 740 Pivot-Bolt Couplings, Plain End
Couplings and Figure 702 Outlet Coupling.
10-15 Corrected document number to TFP1895, formerly shown as TFP1985.
10-14 Added 1 in. (DN25) size information.
04-11 Clarified gasket information.
03-11 Updated patent information.
New Technical Data Sheet TFP1895 provides Gasket Service Recommendations for Fire Grooved
07-04
Products.