Professional Documents
Culture Documents
Oxy Fuel Vs Plasma
Oxy Fuel Vs Plasma
Plasma is rapidly becoming the cutting technology of choice. Fast cut speeds, superior cut quality, and ease-of-use are just a few of plasmas advantages.
1 2 3 4
Plasma cuts have less dross, less warping, and a smaller heat-affected zone.
5 6 7
Easier to use
No gases to regulate, no flame chemistry tomaster. And Hypertherm torches are designed for dragging the torch across theplate. Theres no standoff to maintain.
Greater productivity
With significantly faster cut speeds, plasma outperforms oxyfuel even before you consider oxyfuels Cut speed comparison on 1/2" (12 mm) mild steel 100 preheat time 80 and secondary 60 operations.
Cut speed 40 20 0
Powermax1650 Powermax85 Powermax65 Powermax45 Oxyfuel
Increased flexibility
Cut or gouge mild steel, aluminum, stainless, copper, and most other metals. And use it to cutstacked metal, metal grate, or even rusty or painted pieces.
2500
2000
1000 With operating costs spread over more 500 parts 0 per hour, you have a Powermax1650 lower cost per part.
Improved safety
Powermax85
Powermax65
Powermax45
Oxyfuel
The most popular fuel gas for oxyfuel is acetylene, a highly flammable and unstable gas. With Powermax systems, compressed air isthe only gas youneed.
Higher profitability
Lower operating costs and greater productivity results in more profit for you.
Operating cost per foot
$0.80 $0.70 $0.60 $0.50 $0.40 $0.30 $0.20 $0.10 $0 1/4" 1/2" 3/4" 1" Powermax1650 Oxyfuel
Powermax30 Handheld cut capacity Recommended Severance 1/4" (6 mm) 3/8" (10 mm) 1/2" (12 mm)
Powermax45 1/2" (12 mm) 3/4" (19 mm) 1" (25 mm) 3/8" (10 mm)
Powermax65 3/4" (19 mm) 1" (25 mm) 1-1/4" (32 mm) 1/2" (12 mm)
Powermax85 1" (25 mm) 1-1/4" (32 mm) 1-1/2" (38 mm) 5/8" (16 mm)
Powermax1650 1-1/4" (32 mm) 1-1/2" (38 mm) 1-3/4" (44 mm) 3/4" (19 mm)
Minimum cut speed 20 ipm (500 mm/min) 10 ipm (250 mm/min) 5 ipm (125 mm/min)
www.PlasmaVersusOxyfuel.com
Hypertherm and Powermax are trademarks of Hypertherm, Inc., and may be registered in the United States and/or other countries. 7/10 Hypertherm, Inc. Revision 1 893360