Professional Documents
Culture Documents
Prad4x4™ New Thar Catalog
Prad4x4™ New Thar Catalog
@PRAD4X4 INFO@PRAD4X4.COM
ABOUT OUR PRODUCTS
All the above parts/bumpers and completely Bolton requires
no modification on the vehicle.
The bumpers are made of 3mm MS cr. (4mm in some cases)
The winch cradles are made of 6mm MS.
All the products are CAD designed and high degree
precision is maintained throughout.
The products are laser cut and CNC formed to give you
flawless design, continual QC of the product is done at the
plant during manufacturing at all stages ensuring 0%
rejection rate.
Stages of Material treatment procedure ensures that the
product is suitable for any kind of temperature and
environment.
Stages of treatment are as follows,
1. Degreasing
2. De-rusting
3. Water-rinse
4. Zinc phosphating
5. Water-rinse
6. Preheating
7. Polyester epoxy 70-80 micron coating
8. Heating at 180c at 20min
9. Coating Normalizing
Scratch proof three layer packing, specially designed Boxes
for each product keeping it safe till it reaches the consumer.
FRONT WINCH BUMPER
MOUNT ONLY