Professional Documents
Culture Documents
Fabrication of Water Saving System
Fabrication of Water Saving System
INRODUCTION
In our project “ FABRICATION OF WATER SAVING SYSTEM ”, is
fully automation project. The IR sensor is fixed to the supporting angle .
The IR sensor is used to detect the obstacle, and giving control signal to
the control unit. The control unit activates the relay unit. The solenoid valve
(Tape Open/Close Valve) is connected to the relay circuit.
The solenoid valve is open the water flow pipe , when the relay is
ON so that the water comes out and waste water was controlled
automatically.
DISADVANTAGES