mv Cape Ferrol DG2 Overhaul Daily Work Report 19.06.2024

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

S.M.

RAPIDTECH LTD
A.G. Leventi, 5 Company code:
The Leventis Gallery VAT code: 60014411F
Tower, 13th Floor, service@rapidtech-marine.com
Office 1301, 1097 www.rapidthech-marine.com
Nicosia, Cyprus Tel. +35799875892
DAILY REPORT 0
Owner: Columbia SM Ltd 19.06.2024 Date:
m/v Name: CAPE FERROL 9359325 IMO:
Engine Maker: STX MAN 7L23/30H Engine Type:
Engine Number: DG2 SB7L23-6344 Engine Serial №:

PERSONEL & WORKING HOUR


Name Position Working Hours Over time Travel/Waiting
Huvir Valentyn Service Engineer 10
Protsenko Valerii Technician 10
0 Technician

SCOPE OF WORK (intermediate overhaul 16000 hours) DAY 10

1. During the installation of rocker arm studs, it was detected that the thread for the studs seats was damaged on cylinder
head No.6. It is not possible to tighten the screw stud. It was decided not to use cylinder head No.6 for safety reasons.
Cooling water drained again, and CH was dismantled. The old cylinder head was disassembled, and cleaning was started.

1/3 Designed by Technical Department


S.M.RAPIDTECH LTD
A.G. Leventi, 5 Company code:
The Leventis Gallery VAT code: 60014411F
Tower, 13th Floor, service@rapidtech-marine.com
Office 1301, 1097 www.rapidthech-marine.com
Nicosia, Cyprus Tel. +35799875892
DAILY REPORT 0
Owner: Columbia SM Ltd 19.06.2024 Date:
m/v Name: CAPE FERROL 9359325 IMO:
Engine Maker: STX MAN 7L23/30H Engine Type:
Engine Number: DG2 SB7L23-6344 Engine Serial №:

2. According to the instruction manual, connecting rod nuts were tightened with a nominal pressure of 750 bars.

3. The rocker's arms were installed and tightened according to the instruction manual with a torque of 150Nm. The tappet
clearance was adjusted to Intake 0.5 mm and Exhaust 0.9mm. The old fuel injectors were installed. Unfortunately, the open
pressure adjustment was not done as the test pressure pump was out of order.

2/3 Designed by Technical Department


S.M.RAPIDTECH LTD
A.G. Leventi, 5 Company code:
The Leventis Gallery VAT code: 60014411F
Tower, 13th Floor, service@rapidtech-marine.com
Office 1301, 1097 www.rapidthech-marine.com
Nicosia, Cyprus Tel. +35799875892
DAILY REPORT 0
Owner: Columbia SM Ltd 19.06.2024 Date:
m/v Name: CAPE FERROL 9359325 IMO:
Engine Maker: STX MAN 7L23/30H Engine Type:
Engine Number: DG2 SB7L23-6344 Engine Serial №:

Job plan for: 20.06.2024

• New cylinder head overhaul and installation.


• Sump tank cleaning.

3/3 Designed by Technical Department

You might also like