Professional Documents
Culture Documents
MousetrapDesignSarpErkin1
MousetrapDesignSarpErkin1
MousetrapDesignSarpErkin1
Sarp Erkin
Tools Required
1) Pencil 2) Ruler 3) Glue stick
Parts list
1) 8.5 x 11 in. stiff paper 2) 1.25 in. diameter,
0.25 in. wide rubber band
(2x) (6x)
(1x)
2) Cut the DOTTED LINES with scissors as shown in the image below.
3) Fold all the remaining pencil lines as shown in the image below
4) Evenly apply glue on the places marked on the image shown in the
image below (you are not required to mark the crosses).
5) Join the glued section to the adjacent side as shown in the image
below.
SECTION D:
Assembly
1) With the PENCIL poke a 3mm hole in the top of the cover
as shown in the image below.
2) Loop the thin rubber band through the hole
and tie it off as shown in the image below.