Professional Documents
Culture Documents
Binder1
Binder1
Binder1
SEC. 4
B.N. 50
Page 1 C:\Users\future\Desktop\Youssef Mohammed Abdelrahman ElMoselhy.PC6 (Date Printed: 2024/4/20)
Seq1:1 Out1
4 o1
(OUT)
Out8
o8
(OUT)
Seq1:2 Out2
5 o2
(OUT)
Out7
o7
(OUT)
Seq1:3 Out3
6 o3
(OUT)
Out6
o6
(OUT)
Seq1:4 Out4
7 o4
(OUT)
Out5
o5
(OUT)
Seq1:4 EventCount
8 1 {dCusF}
9 COMMENTS:
1-The program is started by pressing the Start_Switch ( Input 1 ) once due to the presence of the Latch through
2-The program continues to run even after the time specified on the timer has expired, as it has no effect on st
3-The last circuit of the program counts the number of cycles made by the sequencer during operation.
4-When the stop key is pressed, the status of the outputs remains at the last location the PLC reached in the cy
5-The program stops running by pressing on the Stop_Switch once.
2
Starting & Sequence 1:
Sequence 2:
3
Sequence 3:
Sequence 4:
4
Stop:
Cycle Count: