REG009 Stacking and Storing Inspection Checklist

You might also like

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 1

STACKING AND STORING INSPECTION CHECKLIST

Date
Inspection by (Name): SIGNED:
:
Date
Manager / Supervisor (Name): SIGNED:
:

Month: ( / X / N/A) Comments


Use a check () mark for YES = acceptable condition
Use an (X) mark for NO or REPLACE = unacceptable
condition

Are the base level and capable of sustaining the weight


1.
exerted on it by the stack?
Are the articles in the lower tiers capable of sustaining the
2. weight exerted on them by the articles stacked above them?

Are all the articles which make up any single tier consistently of
3. the same size, shape and mass?

4. Are pallets and containers in a good condition?

5. Are support structures used for the stacking of articles


structurally sound and can it support the articles to be
stacked on it?
Are any stacks in danger of collapsing? IF SO, REPORT TO
6. MANAGEMENT IMMEDIATELY.

Is adequate space available for persons engaged in stacking


7. operations?

Is the stability of stacks not endangered by machinery or


8. persons moving past them?

9. Are walkways clear?

10. Were unsafe conditions reported to Management?

1
Document Approved by: CEO

You might also like