Professional Documents
Culture Documents
QUALIFICATION CARD SAMPLE
QUALIFICATION CARD SAMPLE
Range Of Qualification
WELDER QUALIFICATION CARD
Positions: All (Except PG)
ID-NO
DDWD ID No: Base Metal:
Department: Type of Weld: Butt and Fillet
Site test No.: Mat. thickness ≥ 3 mm
Pipe OD: ≥ 500 mm
DDWD Welding Engineer
Code: ISO 9606-1
The welder is qualified for the ranges detailed on the reverse side of this ID card. Site testing was 1.Valid within Dry Docks World-Dubai only.
completed successfully. Verification of documents was done by the project's designated welding 2.Valid for AKSO projects only.
coordinator, endorsed above. 3.Shall be available for review at all time.