Professional Documents
Culture Documents
10-HFP-276-PVI
10-HFP-276-PVI
**Data based on Water at 77° F (25°C) and specific gravity of 1.0. Circulation rates exhibit variances of 15%.
NOMINAL DIMENSIONS
ABCOR® FEG PLUS Module: 10-HFP-276-PVI | page 2
OPERATING GUIDELINES
Ancillary Parts
KSS recommends that these membranes be used with KSS supplied ancillary parts. Sealing is provided by o-rings and
gaskets. No additional sealing compound or tape is recommended for use on threaded connections.
Membrane Incompatibility
Prior to exposing the membrane to any chemical, the chemical should be reviewed by Koch Separation Solutions. Aside from
the listed chemicals below, synthetic coolants, semi-synthetic coolants, kerosenes, naphtha, gasoline, floc polymers may
affect membrane performance.
Chemicals that should be avoided include the following:
Aprotic Solvent (e.g., Dimethyl Formamide, Dimethyl Acetamide, N-Methyl Pyrolidine, etc.)
Chlorinated Solvents (e.g., Methylene Chloride, Chloroform, Carbon Tetrachloride, etc.)
Ketones (e.g., Acetone, Diacetone Alcohol, etc.)
Silicones or Silicone based Defoamers (e.g., Siloxane )
The information contained in this publication is believed to be accurate and reliable, but is not to be construed as implying any warranty or guarantee of
performance. We assume no responsibility, obligation or liability for results obtained or damages incurred through the application of the information contained
herein. Refer to Standard Terms and Conditions of Sale and Performance Warranty documentation for additional information
Koch Separation Solutions, Inc. 850 Main Street, Wilmington, MA 01887
Main: +1-978-694-7000 • Fax: +1-978-657-5208 • Toll Free: +1-888-677-5624
For complete contact information and listing of our global locations, visit www.kochseparation.com
©2020 Koch Separation Solutions, Inc. All rights reserved worldwide. For related trademark information, visit www.kochseparation.com/legal.
05/13 Rev. 13-1