Professional Documents
Culture Documents
Annexure-B_Option-2 PFP ContraFlex Jackets
Annexure-B_Option-2 PFP ContraFlex Jackets
Annexure-B_Option-2 PFP ContraFlex Jackets
PRODUCT DETAILS : H120+50MM JACKET OF THICKNESS 61+50MM FOR HDPE‐CS JOINTS (MAIN SCOPE)
H120 JACKET OF THICKNESS 61MM FOR ADJACENT METALLIC PIPING OF STANDARD 500MM LENGTH
Details for Passive Fire Proofing at exposed HDPE pipe STUDY 371/465
Passive Fire Protection shall provide insulation and limit back the temperature to 70◦C and protect the HDPE raiser transition joints against meltdown due to direct fire and by thermal conduction. PFP
Vendor to advise the extent of PFP requirement on metallic piping if any to achieve this, which shall be supported by technical justification /Heat Transfer calculation. The height mentioned below are the
height of the HDPE Pipes upto HDPE Flange, the additional height required due to the above mentione heat transfer requirement to be added and included by the PFP vendor.
A3‐441‐P‐0063 001 C /
TP‐501 6400‐A1‐401‐58‐6‐R 125 200 $ 597.82
A3‐441‐P‐SK02,sheet001.C
A3‐441‐P‐0063 001 C /
TP‐503 6400‐A1‐401‐58‐6‐R 125 200 $ 597.82
A3‐441‐P‐SK02,sheet001.C
A3‐441‐P‐0063 001 C /
TP‐504 6400‐A1‐401‐58‐6‐R 125 200 $ 597.82
A3‐441‐P‐SK02,sheet001.C