Professional Documents
Culture Documents
Vertical Suspended Centrifugal Pumps
Vertical Suspended Centrifugal Pumps
Vertical Suspended Centrifugal Pumps
Introduction .................................................................. 3
Sundyne reserves its right to modify all or partially any of the data included within this document.
Sundyne Vertical Sump Pump range
More than 50 years of experience in centrifugal pump design, development,
manufacturing and service, to fulfill the latest standards for petroleum, petrochemical
process and heavy duty processing industries, as full compliance machinery.
Vertical suspended centrifugal pumps are core family developed under API610/ISO 13709, latest
edition standards.
Wide range of solutions are designed for matching vertical suspended centrifugal pumps needs in
markets as:
Performance curves
400 2200 8800 44000 USgmp
2000 6000
1500
1000 3000
750 TKVB
500 1500
H (m)
H ft)
50 150
FQ
3
VS1 Type FG
Description
FG vertical pumps have been designed
for pumping fluids on heavy duty process.
Pump assembly has to be partially
submerged, so that pump does not need
priming before operation.
Drive unit is located on the surface,
completely accessible.
Applications
FG vertical pumps are suitable for any pumping
The pump is mainly composed of four
station that requires a vertical pump, preferably in:
different components: bowl assembly,
column, discharge head and drive unit. ➤ Refineries
Sundyne Marelli have different solutions ➤ Desalination plants
for every one, regarding design and size, ➤ Process charge
that allows us to meet any conditions of ➤ API basins
service and installations. ➤ Condensate extraction
➤ Tank Farms
Operating data ➤ Tanks fluid transfer
➤ Capacities: to 5.000 m3/h. ➤ Petrochemical plants
(30000 USgpm) ➤ Fertilizers
➤ Total discharge head up to 300 m. ➤ Oil fields and terminals
(1100 feet) ➤ Off-shore and on-shore installations for
➤ Maximum working pressure up to 30 petroleum and gas
kg/cm2 ➤ Reverse osmosis
➤ Working temperature from -125 ºF ➤ Synfuels
(-30 °C) up to 420 ºF (250 °C) ➤ Paper mills
➤ Pit depths: to 40 feet (12 m) ➤ Other intensive heavy duty services and
All performance data are strictly verified systems, that demand high reliability and
in our test bay. efficient equipment
Performance curves
88 220 440 880 2200 4400 8800 22000 USgmp
400
300 50 Hz 900
H ft)
60
150
40
FG 14-16
FG 25-26
FG 27-28
FG 30-32
FG 20
FG 24
FG 22
FG 10
FG 12
FG 18
20 60
FG 6
FG 8
10
10 20 40 60 80 100 200 400 600 800 1000 2000 4000 6000
Q (m3/h)
4
Motor support Rigid coupling
Discharge elbow
Thrust bearing pot
(optional: Thrust bearing
at motor side)
Shaft coupling
Discharge head shaft
Bearing bracket
Column
Line shaft
Impeller
Bowl bearing
Suction bell
Strainer
Performance curves
88 220 440 880 2200 4400 8800 22000 USgmp
400
300 60 Hz 900
H ft)
60
150
40
FG 25-26
FG 27-28
FG 14-16
FG 30-32
FG 18
FG 10
FG 22
FG 24
FG 20
FG 12
FG 6
FG 8
20 60
10
10 20 40 60 80 100 200 400 600 800 1000 2000 4000 6000
Q (m /h)
3
5
VS2 Type FQ/FQX
Description Operating data
The pumps comprised within FQ/FQX family, are centrifugal pumps, ➤ Capacities: to 11.000 m3/h. (48000 USgpm)
vertical mounted and double suction impeller. That design prevents
➤ Total discharge head up to 300 m. (1100 feet)
some of the bad functioning of semi axial vertical pumps, eliminating
the source of such potential faults, as unbalanced axial thrust. ➤ Maximum working pressure up to 30 kg/cm2
The FQ sub-family comprises all one stage pumps. And the FQX ➤ Working temperature from -125 ºF (-30 °C) up
sub-family comprises pumps with several stages, one of them as to 420 ºF (250 °C)
FQ sub-family inside the bulb volute, and all other stages
➤ Pit depths: to 80 feet (25 m)
incorporated alongside the suspension column itself.
All performance data are strictly verified in our
Double suction vertical suspended centrifugal pumps, FQ/FQX,
test bay.
improve the hydro-mechanical performances compare to the
traditional vertical pumps, saving costs in their preventive
maintenance and overhaul, to help the hydraulic management in
medium and big flow applications.
Applications
The range of applications is then very wide, with projects
and industries as follows:
➤ Sea water in take pumps for desalination plants.
➤ Water reservoir pumps and dumps.
➤ Cooling towers in refineries.
➤ Industrial applications for continuous running
24/24hrs, muning applications.
➤ Petrochemical process and refineries under API
610/ISO 13709 latest edition.
➤ Tank farms for Oil & Gas.
➤ API tanks.
➤ Waste water treatments plants.
Performance curves
880 2200 4400 6600 22000 44000 88000 USgmp
200 600
FQX 50 Hz
150 450
100 300
FQ
H (m)
H ft)
50 150
10 30
200 500 1000 1500 5000 10000 20000
Q (m3/h)
6
Flexible coupling
Friction Bearings
Shaft coupling
Double Wear rings
Reinforced Column
volute
Double suction
Impeller
API 610 Split
Pump Shaft
Screen filter
Performance curves
1100 3000 6600 8800 30000 60000 120000 USgmp
600 1800
300 900
H ft)
H (m)
FQ
150 450
25 75
250 700 1500 2000 7000 14000 28000
Q (m3/h)
7
VS4 Type VSMK
VSMKD
Applications
Sundyne Marelli, develops tailor made solutions for the
medimum-pressure movement of water, hydrocarbon, and
other process liquids. Our solutions meet the most stringent
customer specifications for the following heavy industries:
➤ Refineries
➤ Desalination plants
➤ Process charge
➤ API basins
➤ Condensate extraction
➤ Tank Farms
➤ Tanks fluid transfer
➤ Petrochemical plants
➤ Fertilizers
➤ Oil fields and terminals
➤ Off-shore and on-shore installations for petroleum
and gas
Operating Data ➤ Reverse osmosis
➤ Capacities: to 3500 USgpm (800m3/hr) ➤ Synfuels
➤ Heads: to 850 feet (270 m) ➤ Paper mills
➤ Temperature Range: to 450 ºF (232 ºC) ➤ Other intensive high-pressure services and systems,
➤ Pit Depths: to 30 feet (10 m) that demand high reliability and efficient equipment
Performance curves
35 44 220 440 880 2200 4400 USgmp
500
400
50 Hz
300 900
200 600
150
100 300
H (m)
H ft)
50 150
10 30
5 15
8 10 50 100 200 500 1000 1500
Q (m3/h)
8
Motor support. Strong Spacer Coupling
construction that supports the to facilitate dismantling
pump column, bearing housing of mechanical seals
and electric motor
Non sparking
coupling guard
Performance curves
35 44 220 440 880 2200 4400 6600 USgmp
1000
60 Hz
500 1500
400
300 900
200 600
150
100 300
H (m)
H ft)
50 150
30
10
5 15
8 10 50 100 200 500 1000 1500 5000 10000
Q (m3/h)
9
VS6 Type (semiaxial bowl type) FGB
Description Applications
Operating at very low, null or negative NPSHa values, ➤ Refineries
these pumps are fitted with a can, containing ➤ Desalination plants
hydraulic parts and column, hermetically closed and ➤ Process charge
baseplate. Column length is calculated according to
➤ API basins
NPSHa-NPSHr ratio. Suction and delivery flanges in line
construction or suction flange under ground level are ➤ Condensate extraction
available. ➤ Tank Farms
Main applications in oil industries, refineries, ➤ Tanks fluid transfer
petrochemistry, pipe lines, power plants, siderurgical ➤ Petrochemical plants
industries, chemical plants, nuclear plants, reverse ➤ Fertilizers
osmosis, desalination, airport supplies, etc.
➤ Oil fields and terminals
Idoneous to pump hydrocarbons LPG's, ammonia, ➤ Off-shore and on-shore installations for
criogenic liquids, condensates, propilene and very cold or petroleum and gas
hot clean liquids in general.
➤ Reverse osmosis
➤ Synfuels
➤ Paper mills
➤ Other intensive heavy duty services and
systems, that demand high reliability and
efficient equipment
Operating data
➤ Capacity Q up to 5,000 m3/h.
➤ Total dynamic head 600 m (1800 feet)
➤ Discharge pressure 50 bar
➤ Temperature from –80 ºC (125 ºF) up to 250 ºC
(482 ºF).
Performance curves
88 220 440 880 2200 4400 8800 22000 USgmp
400
300 50 Hz 900
H ft)
60
150
40
FGB 14-16
FGB 25-26
FGB 27-28
FGB 30-32
FGB 20
FGB 24
FGB 22
FGB 10
FGB 12
FGB 18
FGB 6
FGB 8
20 60
10
10 20 40 60 80 100 200 400 600 800 1000 2000 4000 6000
Q (m /h) 3
10
Thrust bearing
(optional: thrust bearing
at motor side with
Flexible coupling rigid combined)
Bowl type
impellers with wear rings
Performance curves
88 220 440 880 2200 4400 8800 22000 USgmp
400
300 60 Hz 900
H ft)
60
150
40
FGB 25-26
FGB 27-28
FGB 14-16
FGB 30-32
FGB 18
FGB 10
FGB 22
FGB 24
FGB 20
FGB 12
FGB 6
FGB 8
20 60
10
10 20 40 60 80 100 200 400 600 800 1000 2000 4000 6000
Q (m /h)
3
11
VS6 Type (ring section impeller) TKVB
Description Applications
TKVB pumps are multicelular, specially adequates for ➤ Refineries
pumping fluids at medium and high pressures. ➤ Desalination plants
They are manufactured in materials selected for each ➤ Process charge
particular application, all included within table H1 of API ➤ API basins
610 standard.
➤ Condensate extraction
Manufacturing processes guarantees the best quality level ➤ Tank Farms
and includes rotor dynamic balance, hydrostatic and
➤ Tanks fluid transfer
performances tests, measuring flow, head efficiency,
NPSH, vibrations and the most rigorous quality control. ➤ Petrochemical plants
➤ Fertilizers
Multistage centrifugal pumps up to 14 stages (standard
construction), mounted in series separated and placed ➤ Oil fields and terminals
into perpendicular elements to the shaft rotation. ➤ Off-shore and on-shore installations for petroleum and
gas
Leakproof between stages is guaranteed by O-rings
(Perbunan is standard manufacturing) with a perfect tight ➤ Reverse osmosis
by exterior tie bolts. ➤ Synfuels
Axial thrusts are compensated by dynamically balanced ➤ Paper mills
impellers. The remaining axial thrusts are taken up by ➤ Other intensive high-pressure services and systems,
adequately sized antifriction bearings. that demand high reliability and efficient equipment
For pressures higher than 35 kgs/cm2, axial thrust is
compensated by balancing discs.
Operating data
In the discharge side, feet are under the discharge casing.
Flow: up to 700 m3/h (3100 USgpm)
In all pumps until 65-100, the discharge side feet are
Manometric head: up to 400 m (1200 feet)
located under the first elements to allow diferent suction
locations. Maximum working pressure: up to 40 kg/cm2.
In higher models the feet are located under the suction Temperature: -80 ºC (-125 ºF) to 250 ºC (482 ºF).
side (location can be varied under request). From 110 ºC with cooled stuffing box (R).
12
➤ Sealing on the shaft can be done
e i t h e r b y a st u f f i n g b ox o r
mechanical seal, as required. Motor levelling using
➤ Suction flange arranged jack screws
or registered fits
horizontally towards the left hand
side and discharge flange radially
upwards viewed from coupling side.
Flanges execution according to DIN Flexible coupling Thrust bearing
standards from 2432 PN 10 up to (optional: thrust bearing
at motor side with
2535 PN 40 depending on sizes and
rigid combined)
pressures ANSI flanges under
request. Constant level oiler
➤ C o l u m n o f v a r i a b le le n g t h
depending on the installation needs.
API 682 latest edition
Transmission shafts and guide Rigid coupling for mechanical seal
bearings are lubricated by the easy dismantling
pumped fluid itself. (optional)
H (ft)
50 6 5 3 2
8 5 125-150A
5 3
7 4 2
4
6 4 100-150 100
5 3
3
25 2 80-125
3
4
2
3 2
2 65-100
50-80
40-65 50
2 32-50
10
25-40
6 20
2,5 5 10 25 50 100 250 500 1000 Q m3/h
10 5 4 3
200 9 6
6
5 600
2
8 5 3
7 4
4 2
100-150
6 4 3 400
H (m)
H (ft)
5 3
100 3
2
80-125
300
80
4
2
65-100
2
3 2 50-80 200
60
32-50 40-65
40 2
25-40
100
25
5 10 20 30 40 60 80 100 150 200 260 Q m3/h
20 30 40 50 60 80 100 200 300 400 500 600 800 1000 2000 3000 IGPM
20 30 40 50 60 80 100 200 300 400 500 600 800 1000 2000 3000 4000 USGPM
350
1000
6 6 5 4
8
250 4
7 5 5
8 9 6 3 4
12 10 4 4
13 3 3
14 9 7 5
10 11 8 6 500
13 11 12 2
12 4
7 3 3
9
14 10 11 9 10 8
6 5 2 200-250A
13
12 7 4 2
100 11 8 9 7
8
6 5 3 2 2
10
150-200
9
6
7 6
5
4
3
200-250B 250
2
8 5
4
125-150A 125-150B
7
5 3
H (m)
H (ft)
6 4
50 4 100-150
5 3 3
2 80-125
4 3
2
65-100 100
25 3 2
2 50-80
40-65
2 32-50
50
25-40
10
6 20
2,5 5 10 25 50 100 250 500 1000 Q m3/h
7 4 2
200
6 4
3 600
3 2 80-125
5 3
4 2 65-100 400
H (m)
H (ft)
2
100 50-80
2
40-65 300
3
80
2 32-50
60 200
25-40
40
100
25
5 10 20 30 40 60 80 100 150 200 260 Q m3/h