Professional Documents
Culture Documents
AH_FMC_PN-10_SIC-Flow regulators
AH_FMC_PN-10_SIC-Flow regulators
AH_FMC_PN-10_SIC-Flow regulators
GENERAL FEATURES
Nominal working pressure 350 bar
Regulated flow up to 40 l/min.
Fluid temperature range from -20 up to 120⁰C
Hardened and precise machined working parts
Flow rate setting with adjustment screw or with hand wheel.
Fully pressurized by pass ports at 3 way regulator.
All cartridge valves are Zinc coated as basic 240 hours according to
salt spray test (DIN 9227). Zinc Nickel for even higher anticorrosion
protection on request.
ADVANTAGES
Typical performance is very quiet and stable flow setting over complete flow ranges.
All flow regulators are using common UNF Interchangeable cavities ¾-16 UNF and 7/8-14 UNF.
BENEFITS
Using the ARGO-HYTOS flow cartridges brings the stability for complete circuits.
When used typically in indoor systems the overall noise of complete hydraulic system is reduced.