Professional Documents
Culture Documents
الموقع العام
الموقع العام
الموقع العام
LEAD CONSULTANT:
L L
www.ecgsa. com
· All dimensions are in millimeters, all dimensions should be verified on site and
approved by the authorized engineer.
· Unless otherwise indicated, levels are in meters (m) and angles are in degrees.
EL 26 250 · Drawings are not to be scaled, written dimensions should be followed.
TOPR · All drawings should be read in conjunction with other relevant architectural,
EL 10 000 structural, mechanical, electrical drawings and all other relevant sections of the
J FPL specifications. J
· For symbols & abbreviations, refer to drawing No. AI002
EL 26 250 EL 26 250 · The Contractor shall send site coordinates and levels relative to MSL before
TOPR TOPR execution
EL 26 250 · For the structural elements, refer to structural drawings.
TOPR
· For the structural elements supporting masonry works refer to structural
drawings.
· Unless otherwise indicated, all the structural elements supporting masonry
walls should be within walls thicknesses.
· For external levels, slopes, finishes, dimensions, etc...., refer to landscape &
roads drawings.
H · For Internal Finishes, refer to finishes schedules and interior design H
drawings.
EL 25 600 EL 26 250 · For doors, windows and elevations types' location and dimensions refer to
TOPR TOPR openings drawings and schedules.
· For signage details, refer to signage drawings.
EL 26 250 · Unless otherwise indicated, gypsum board partitions should continue 200
TOPR mm above suspended ceiling finished level.
· Junctions between reinforced concrete and block works should be treated
by metal lath prior to applying plaster.
EL 25 600
TOPR · Fire rated walls, refer to life safety drawings.
· All kitchens and toilets walls should be solid masonry units.
G · Unless otherwise indicated on drawings, door jambs should be located 200 G
mm from the nearest adjacent wall face.
· For exact location and size of MEP openings, refer to structural drawings.
2 1 Shop drawings for the coordinated openings should be submitted to the
AE-202 authorized engineer for approval.
AE-202
EL 25 600
TOPR
EL 28 000
TOPR
EL 10 450 EL 10 000
FFL FPL
F F
EL 25 600
TOC
EL 10 450 EL 25 600
EL 27 400 TOPR
FFL TOC
E E
EL 26 250
AE-301 TOPR AE-301
EL 10 000 EL 26 250 EL 26 250 EL 26 250
FPL EL 26 250 TOPR TOPR TOPR
TOPR
Sheet size - ISO A1 (841*594 mm)
D D
B PROJECT TITLE:
AE-201
B ARCHITECTURAL B
50 mm
SHEET TYPE
ARCHITECTURAL PLANS
Scanning scale
SHEET TITLE