Professional Documents
Culture Documents
SB044.16 Adjustment MOTF with Compensation Logo
SB044.16 Adjustment MOTF with Compensation Logo
SB044.16 Adjustment MOTF with Compensation Logo
Problem
Text and logos in MOTF applications appear skewed and warped when the marking
head is not aligned to the substrate and/or parameters are incorrectly set. Correcting
these parameters using the customer logo or text can be difficult.
Solution
1. Download the compensation logo file and service instruction »AL-77539 Adjustment
MOTF« from the Alltec Service Pages.
• Logo: Service Pages -> Released Software -> Tools -> Compensation.ai
• Service Instruction: Service Pages -> Released Software -> Tools -> AL-77539
Adjustment MOTF
Editor‘s Note: This Service Bulletin is an internal publication of the Laser Business Unit intended for it‘s service channels. Thus, this bulletin is
confidential to the ALLTEC Laser Business Unit, all LBU sales/service partners and their resp. distributors and sales/service partners. This publi-
cation should not be copied in whole or part to any other party without the prior written consent of the Laser Business Unit. As such this paper is
confidential.
ALLTEC GmbH | Laser Business Unit | International Service Center | service@alltec-laser.com | www.alltec-laser.com 1/1
An der Trave 27 -31 | 23 923 Selmsdorf | Germany | Phone + 49 (0) 388 23 . 55 - 0 | Fax - 222