Professional Documents
Culture Documents
STANDARDS_MANUAL_2011_AGR
STANDARDS_MANUAL_2011_AGR
TYRES
INDEX PAGE
8. Code Designated Normal Section Size with Service Description and/or PR Marked A.8
– Diagonal
9. Rims A.9
10. Variation in Load Capacity (%) with Speed A.9
11. Code Designated Normal Section Sizes with Service Description and/or PR Marked – A.10, A.11
Diagonal
12. Metric Sizes - Speed Category A8 – Diagonal A.12
13. Code Designated Normal Section Sizes – Radial A.13
14. Metric Sizes – Radial A.14 to A.19
15. Variation in Load Capacity with Speed for Drive Wheel Tyres with service description A6,
A.20, A.21
A8 and D Speed Category and PR marked
16. Rims for Tractor Tyres for Traction Wheels A.22 to A.24
➤ ➤ ➤ ➤
European Tyre and Rim Technical Organisation – Standards Manual – 2011 A.1
Agricultural Equipment Tyres
INDEX ➤ PAGE
HIGH AND VERY HIGH PNEUS À HAUTE ET TRÈS HOHE UND SEHR HOHE
FLEXION TYRES HAUTE FLEXION EINFEDERUNG
17. Metric sizes for Traction Wheels very High Flexion - VF marked A.25
18. Metric sizes for Traction Wheels High Flexion - IF marked A.26
19. Variation in Load Capacity with speed for improved High and Very High Flexion tyres -
A.27
Metric sizes - Radial
20. Rims for High and Very High Flexion tyres - Metric sizes - Radial A.28
21. Metric Sizes for Forestry Tyres - Speed Category A8-A2 - Diagonal A.29
22. Rims for Forestry tyres A.30
23. Variation in Load Capacity (%) with speed for Traction wheels Speed category A8-A2 A.30
24. Code Designated Normal Section Sizes for Traction Wheels speed category A8 with or A.31
without ply rating marking – Diagonal and Radial
25. Metric designated Sizes for Traction Wheels Speed Category A8 – Diagonal, Bias-Belted
A.32, A.33
and Radial
26. Variation in Load Capacity with Speed For Diagonal & Radial Tyres – Speed Category A8 A.34
27. Rims for Construction Applications Tyres for Traction Wheels A.35
28. Code Designated Normal Section Sizes with Service Description and/or PR Marked – A.36
Diagonal
29. Code Designated Low Section Sizes with Service Description and/or PR Marked – Dia-
A.37, A.38
gonal
30. ‘40’ to ‘100’ Series Metric Sizes – Diagonal and Radial A.39 to A.41
31. Variation in Load Capacity with Speed for Implement tyres A.42
32. Metric Sizes with Service Description Speed Category D A.43, A.44
33. Variation in Load Capacity with Speed for Metric Sizes with Service Description Speed
A.45
Category D
34. Rims A.46 to A.48
35. Low Section Sizes with Service Description and/or PR Marked – Diagonal A.49
36. Rims A.49
A.2 European Tyre and Rim Technical Organisation – Standards Manual – 2011