Professional Documents
Culture Documents
vertiv ups-quick-install-guide
vertiv ups-quick-install-guide
590-2175-501A/SL-70351_REV0 1
VERTIV™ DESKTOP UPS
Quick Installation/User Guide
Vertiv™ Desktop
2 1 2
Set-up and Start-up Plug your critical equipment 3. To start the UPS:
Inspect the UPS for any signs of (such as computer, monitors, Plug the UPS input cord into
obvious damage. If damage is etc.) into the battery-backed the wall outlet. Plug-in all
visible, do not proceed with the receptacles and your less- equipment to protect in the
set-up and call our warranty critical equipment (such as appropriate receptacles. To turn
support line for assistance printers and other less-often on the UPS, press the ON/OFF
1‑800‑222‑5877 menu option 3, used peripherals) into the button. The connected
email: surge-only receptacles. equipment immediately receives
microups.warranty@vertivco.com. 2. To protect your modem or power and the UPS starts a
1. To protect your computer, telephone: short, self system test
Use the modem/telephone (electronics and battery check).
monitors, and other
crictical equipment: surge-protection ports. Use the While every precaution has
The UPS has 3 battery-backed “IN” port to connect the line been taken to ensure that the
and surge-protected from the wall jack and the battery is in good condition, we
receptacles and 2 surge- “OUT” port to connect to your recommend allowing the UPS
protected-only receptacles. device port. Use of this feature to charge the battery for at
is not required for proper least 8 hours prior to providing
operation of the UPS. full back-up time protection for
any utility-power abnormality.
2 590-2175-501A/SL-70351_REV0