Professional Documents
Culture Documents
20EC4T5_EC(IV Sem)
20EC4T5_EC(IV Sem)
(AUTONOMOUS)
Accredited by NAAC with “A” Grade :: An ISO Certified Institution
Erode – 638 104
Semester(s) &
IV Sem – B.E. ECE AY 2023-24
Programme(s)
Unit
BJT AMPLIFIERS
I
CO1 K1
1. Define the various h-parameter in a transistor.
List the advantages of using h- parameters for analysing transistor CO1 K1
2.
amplifiers.
CO1 K1
3. What is the coupling schemes used in multistage amplifiers?
CO1 K2
Illustrate the voltage gain for CE configuration including source
4.
resistance.
CO1 K2
5. Illustrate the small signal equivalent circuit of CB amplifiers.
CO1 K1
6. Define Miller’s theorem.
CO1 K1
Why do you choose emitter bypass capacitor in CE amplifier
7.
circuit?
CO1 K2
8. Show the hybrid model for transistor
Page 1 of 9
Q. Part B & C Questions
Marks CO BT
No.
Or
(ii) Outline the concept of collector transistor amplifier
and derive the expression for input impedance and
2. voltage gain. Assume suitable model for transistor. 16 CO1 K2
Or
(iii) Illustrate the working principle of collector transistor
amplifier and derive the expression for input impedance
and voltage gain.
Or
(iii) Demonstrate the operation of of two stage RC coupled
CE - CB amplifier and derive the expression of overall
Page 2 of 9
voltage and current gain.
Unit
FET AMPLIFIERS
II
1. CO2 K2
Illustrate the temperature on drain current of MOSFET.
2. CO2 K1
What do you mean by thermal runaway?
3. CO2 K1
What are the features of cascade amplifier?
4. CO2 K1
Find the expression for ID for EMOSFET.
5. CO2 K1
List the different types of FET biasing circuits.
6. CO2 K2
Summarize the importance of selecting the proper operating point.
7. CO2 K1
Show the voltage divider bias circuits for FET.
8. CO2 K2
Compare nMOS and pMOS.
9. Outline the concept of operating point. CO2 K2
Page 3 of 9
(i) Explain briefly the concept of DC load line with the help
of neat diagram.
Or
(ii) Outline the concept of DC load line and also explain it
using common emitter amplifier characteristics as an
2. example. 16 CO2 K2
Or
(iii) Show the operation point select in DC DC load line and
also explain it using common emitter amplifier
characteristics as an example.
CO3 K2
In a voltage amplifier, addition of negative feedback reduces its voltage
3.
gain from 300 to 60. Determine the feedback factor.
CO3 K1
4. Define desensitivity
Compare the input and output resistance of the voltage and current
5.
shunt feedback amplifiers. CO3 K2
Page 4 of 9
6. What is return ratio of feedback amplifier?
CO3 K1
If an amplifier has the gain of 400 and feedback ratio of 0.1, find the
7.
gain with negative feedback. CO3 K2
(i) Build the current series feedback amplifier and derive the
expression for gain, input and output impedance.
Or
(ii) Develop the series to series feedback amplifier and derive the K3
3. expression for gain, input and output impedance. 16 CO3
Or
(iii) (iii) Choose the transconductance amplifier and derive the expression for
gain, input and output impedance.
4. (i) Develop the current shunt feedback amplifier and derive the 16 CO3 K3
expression for gain, input and output impedance.
Page 5 of 9
Or
(ii) Construct the series to series feedback amplifier and derive the
expression for gain, input and output impedance.
Or
(iii) Apply the transconductance amplifier and derive the expression
for gain, input and output impedance.
Unit
IV OSCILLATORS
Give the equivalent circuit of quartz crystal and mention its series and
4. K2
parallel resonant frequency CO4
Why LC tank circuit does not produce sustained oscillations. How can
5. K1
they overcome? CO4
CO4 K1
9. Why amplitude stabilization is necessary in oscillator?
CO4 K1
10. List out the different types of oscillators.
Or
(iii) Build the circuit diagram of Hartley oscillator and derive
the expression of frequency and condition for oscillation .
Or
(ii) Develop the circuit diagram of colpitt’s oscillator and
derive the expression of frequency and condition for
oscillation .
2. 16 K3
Or CO4
(iii) Choose the LC oscillator with two capacitive reactances
and one inductive reactance in feedback network. Also
derive the expression of frequency and condition for
oscillation .
Or
(ii) Build the circuit diagram of Wein bridge oscillator and
explain it with necessary expression for its frequency of
3. oscillation. 16 CO4 K3
Or
(iii) Develop the circuit diagram of Wein bridge oscillator.
Derive the expression for its frequency of oscillation and
hence explain how Barkhausen conditions are satisfied in
this RC oscillator.
Or
(v) Develop the circuit diagram of clapp oscillator and derive
the expression of frequency and condition for oscillation .
Or
(vi) Choose the LC oscillator with three capacitive reactances
and one inductive reactance in feedback network. Also
Page 7 of 9
derive the expression of frequency and condition for
oscillation .
Unit
TUNED AMPLIFIERS
V
CO5
1. What is tuned amplifier? K1
CO5
2. What are the applications of tuned amplifiers? K1
CO5
3. Define Q-factor. K1
CO5
4. What is the need for neutralization in tuned amplifiers? K1
Find the bandwidth of a 3 stage cascaded single tuned amplifier if the CO5
5. K1
resonant frequency is 455 KHz and the loaded Q of each stage is 10.
CO5
6. What is a stagger tuned amplifier? K1
CO5
7. What is double tuned amplifier? K1
CO5
8. What is narrow band neutralization? K1
CO5
A tuned amplifier is designed to receive AM broadcast of speech signal
9. K2
at 650 KHZ. What is needed Q for amplifer?
CO5
10. Illustrate the ideal and actual response of tuned amplifier. K2
Page 8 of 9
with that of a two stage stagger tuned amplifier.
Or
(iii) Outline the concept of stagger tuned amplifiers and derive
the frequency response of two stage stagger tuned
amplifier.
Or
(ii) Show the circuit diagram of class C tuned amplifier and
4. derive its gain, output power, power dissipation and 16
efficiency.
Or
(iii) Illustrate the working principle of class C tuned amplifier
with neat diagram and derive its gain, output power,
power dissipation and efficiency.
Prepared By Approved By
Program Coordinator /
Faculty Module Coordinator
Board Chairman
Page 9 of 9