Professional Documents
Culture Documents
Automated Attendant
Automated Attendant
Quote
Hi to all,
Can anyone please help me with setting up the Automated Attendant in OXO R400/16.5 (MIX 4/8/4,
APA 4, CPU-2)??? I have read the documentation but I have problem with setting up this function, due
the fact that I am new in OXO programming
I think that I have License because in "software key features" I can see that in Automated Attendant
entry, Authorized by software key is set to "open" and Realy activated is set to "not config"
Incoming call (in analog line)-->Global Greetings message (comapny's welcome message) -->Message
"Press 1 for sending FAX or wait for the operator"
CHOICE 1-->if the user presses 1 --> divert to 1st analog internal line (int. no. 118)
CHOICE 2-->if user waits--> the hold on music plays and the phones (int 110,111,113) are ringing
arhatzad
Quote
Hi to all,
Ιf anyone has more experience in OXO programming, please feel free to make any comments or
additions.
Note: If you have two external Lines you have to add 2 VMU’s and etc.
Then select the VT and hit Details ->Dyn.Rout. -> check VMU as Auto. Attendant (lev.1) and (lev.2) and
press OK
Then, press the button AA Menu->In entry 1 (Key 1) select from the list ”Transfer to subscriber/group
and the Int. No (internal number) of the FAX Machine (my choice 118).
Note: The Fax machine must be always connected to the first analog interface of the board.
Then go to the “Voice Prompt – AA Main Menu” and upload your recorded message, and when you done
press OK.
Now go to Voice Processing->Automated Attendant->AA Menu->Closing Hours and press the “Copy”
button.
With this function all the choices that you have made in Opening Hours menu are copied to Closing
Hours menu.
Attendant Groups-> Select the first entry (Group Index 1) and press Details->Add->Select Virtual
Terminal’s Int. No (my choice 132)->OK->OK
Follow the same steps for the second entry (Group Index 2)
Time Ranges->Monday -> Make whatever choice you want in call distribution cell and then in Att. Grp.
Cell select 1 or 2.
My choices are:
08:00AM – 08:00PM – Normal/Opening Hours – 1 – NO
08:00PM – 08:00AM – Normal/Opening Hours – 2 – NO
When you have done with Monday press the copy button and select the days of the week that you want
these settings to be applied.
External Lines->List of Accesses->Select the Analog line(s) you want to enable the AA->Details->Call-
Dist->Enter in Both sections the Int. No of VT (132)->OK->OK
Richard
Quote
Post by Richard » 14 Jun 2012 02:57
Dear All
I have an Automated Attendant that is not transferring to an external number using speed dial, I have
followed what has been suggested on how to do trunk to trunk transfer but it doesn't work. Kindly help.
The system is OXO R8.
regards,
Richard
Dear All,
leepyatt
Member
Posts: 3
Joined: 07 Mar 2011 06:25
Quote
Richard
Quote
sbnks
Quote
Post by sbnks » 17 Sep 2014 04:39
hi guyz
i am configuring Auto Attendant for 3 days now it's my first oxo, i am trying to upload a greeting
recording, but keep getting this message " the voice prompt transfer failed due to either too long file
size or insufficient rights ( software licensing ) ", please advice i need immediate help....thnx
Top
junoooni
Member
Posts: 160
Joined: 29 Aug 2016 02:34
Quote
HI...
i have made AA working.... I have a welcome announcement in my AA, it ask user to press 1 for admin,
2 for sales, etc.. caller have to listen to full announcement before making any selection.. if caller press
any key during announcement, it says "Invalid Input" and then transfer to voicemail...is there any
option to make the announcement intterruptible?
Top
JochenMExT
Quote
Yoo all,
I tried the steps above but did not succeed (we need something similar yet different) :
We own a call-center (only outbound phonecalls). The outgoing (alternative) CLIP is a general number
which gives a 'occupied'-ringtone.
Now we want to change the 'occupied' to a recorded message, without a mailbox, just to inform the
caller they need to call the main number of the company.
Any quick help please ?
THX
Top
jaheshkhan
Member
Posts: 4
Joined: 10 Aug 2020 09:12
Quote
my greeting for closing hours voice prompt not working. it still playing opening hour voice prompt