Professional Documents
Culture Documents
GRUNDFOS_SP46-17
GRUNDFOS_SP46-17
SP 46-17
Grundfos SP are submersible borehole pumps, designed for
pumping groundwater. Grundfos SP are all stainless-steel
pumps, and they are available in 3 material grades. The pumps
are suitable for boreholes in sizes ranging from 4" over 6" and
8" to 10". The motor sizes for the pumps are available in
0.37-250 kW.
Note! Product picture may differ from actual product
160 80
140 70
120 60
100 50
80 40
60 30
40 20
30 P1 12
25 10
20 P2 8
15 6
10 P1 = 28.85 kW 4
5 P2 = 24.14 kW 2
NPSH = 3.36 m
0 0
1/6
Submittal Data
RP3
148 GN
2202
3079
877
139.5
Materials:
Impeller: Stainless steel
1
18d 142a Impeller: AISI 304
18b
3
2 Impeller: EN 1.4301
18
8 4 Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301
13
72 Motor: AISI 304
11
13
7 72
9 8
16
13
12 72
7
6b
8b 10
8a
11c
13
12 72
14
68
15
14
17
17
19 19
18c
14a
18d 22 22
58
18d 18g 73
58a
2/6
Company name: ANJANA PROJECTS LTD
Created by: ENG.EMMA
Phone: 0750400818
Email: infoanjanaprojects@gmail.com
Date: 01/06/2022
Qty. Description
1 SP 46-17
Submersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel
components are made in stainless steel, EN 1.4301 (AISI 304), that ensures high corrosive resistance. This pump
carries drinking water approval.
The pump is fitted with a 26 kW MS6000 motor with sand shield, mechanical shaft seal, water-lubricated journal
bearings and a volume compensating diaphragm. The motor is a canned type submersible motor offering good
mechanical stability and high efficiency. Suitable for temperatures up to 40 °C.
The motor is fitted with the Grundfos Tempcon sensor that, by use of powerline communication together with a
MP204 control panel, enables temperature monitoring.
The motor is for direct-on-line starting (DOL).
Liquid:
Pumped liquid: Water
Liquid max temp: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Technical:
Pump speed on which pump data are based: 2900 rpm
Actual calculated flow: 42.65 m³/h
Resulting head of the pump: 156 m
Shaft seal for motor: CER/CARNBR
Approvals on nameplate: CE,GOST2
Curve tolerance: ISO9906:2012 3B
Motor version: T40
Materials:
Pump: Stainless steel
EN 1.4301
AISI 304
Impeller: Stainless steel
EN 1.4301
AISI 304
Motor: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Pump outlet: RP3
Motor diameter: 6 inch
Electrical data:
Motor type: MS6000
Rated power - P2: 26 kW
Power (P2) required by pump: 26 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-400-415 V
Others:
Minimum efficiency index, MEI ≥: 0.40
ErP status: EuP Standalone/Prod.
Net weight: 120 kg
Gross weight: 162 kg
Shipping volume: 0.369 m³
Danish VVS No.: 388462026
2202
RP3
148
RP3
148 GN
Liquid:
Pumped liquid: Water
Liquid max temp: 40 °C
Max liquid t at 0.15 m/sec: 40 °C
Electrical data:
2202
Windings: Enamelled
Others: U1, W2 Brown
V1, U2 Black
Minimum efficiency index, MEI ≥: 0.40
W1, V2 Grey
ErP status: EuP Standalone/Prod.