Professional Documents
Culture Documents
GRUNDFOS SP_17-17
GRUNDFOS SP_17-17
GRUNDFOS SP_17-17
SPE 17-17
Grundfos SPE is a range of frequency regulated submersible
pumps for Groundwater. The pumps are all stainless-steel and
available in 3 material grades (sizes: 6", 8" and 10"). The 6"
motor (4 to 45 kW) is a permanent magnet type with high
energy efficiency and needs a frequency drive to operate.
140
120
100 100
80 80
55 %
60 60
40 40
10
2
P1 (motor+freq.converter) = 9.641 kW
0
1/9
Submittal Data
RP2 1/2
142 GN
1310
1976
667
Materials:
Pump: Stainless steel
Pump: EN 1.4301
Impeller: Stainless steel
Impeller: AISI 304
18d
1 1a Impeller: EN 1.4301
142a 142a
18b
2 2
37
3 3
8 4 203 7
8 4a
18 13
72
16 7
8 9
12 11
7
8a
8 9
11
12
18c
14a 25
18d 14a
7
64 15
14 17
17
75
19 19
22a
22 22
58
73
58a
2/9
Company name: ANJANA PROJECTS LTD
Created by: ENG.EMMA
Phone: 0750400818
Email: infoanjanaprojects@gmail.com
Date: 01/06/2022
Qty. Description
1 SPE 17-17
Multi-stage speed regulated submersible pump for raw water supply, groundwater lowering and pressure boosting.
The pump is suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibers.
The pump is made entirely of Stainless steel DIN W.-Nr. EN 1.4301 and suitable for horizontal and vertical
installation. The pump is fitted with a built-in non-return valve.
The motor is a 3-phase synchronous high efficiency permanent magnet submersible motor of canned type. All
surfaces in contact with pump media are made of stainless steel. Motor type is IPM with embedded magnets in the
metal cladded rotor – needs frequency drive to start and speed regulate.
CUE is a complete range of external frequency converters designed for speed control of a wide range of Grundfos
pumps. CUE has a built-in PI controller and offers the same functionality and user-interface as Grundfos E-pumps.
CUE solutions can thus be seen as an extension to the E-pump range.
By choosing a CUE-solution, you will get the following benefits:
- Grundfos E-pump functionality and user-interface
- application- and pump-family-related functions
- increased comfort compared to fixed-speed pumps
- very easy installation and commissioning compared to standard frequency converters
- speed control of pumps up to 250 kW
- speed control of pumps installed in potentially explosive environments.
CUE offers the following inputs and output:
- RS-485 GENIbus
- an analog 0-10 V input for external setpoint
- an analog 0/4-20 mA input for sensor
- four digital inputs for various functions, for instance external start/stop
- two signal relays (C/NO/NC).
Accessories:
Input/output add-on board
Provides additional input:
- one 0/4-20 mA analog input for an additional sensor
- one 0-20 mA analog output
- two inputs for Pt100/Pt1000 temperature sensors, for instance for bearing monitoring.
Motor filters:
For reduction of dU/dt and peak voltages to the motor windings and for reduction of the acoustic noise generated in
the motor, a number of motor filters are offered:
- dU/dt filters , 11-250 kW
- Sine wave filters, 0.55-250 kW.
Technical:
Approvals on nameplate: CE, CULUS, C-TICK
Installation:
Range of ambient temperature: 0 .. 45 °C
Relative humidity: 5-95 %
Electrical data:
Rated power - P2: 15 kW
Mains frequency: 50 / 60 Hz
Rated voltage [V]: 3 x 380-440/441-500 V
Rated current: 32-27 A
Maximum current consumption: 32 A
Efficiency at full load: 98 %
Enclosure class (IEC 34-5): IP20
Sine wave filters have a high degree of filtering, resulting in a high reduction of the stress on the motor insulation
system. At the same time, they reduce the acoustic noise from the motor.
Motor losses are reduced due to the fact that a sine-wave filter converts the output pulses of the frequency converter
into at sine-wave-shaped. The result is a sine-wave-shaped current and reduced motor noise.
Output filters are used for reducing the voltage stress on the motor windings and the stress on the motor insulation
system as well as for decreasing acoustic noise from a frequency-controlled motor.
Technical:
160
Pump speed on which pump data are based: 3000 rpm
140
Actual calculated flow: 16 m³/h
120
Resulting head of the pump: 144 m
Stages: 17 100 100
Impeller reduc.: NONE
Shaft seal for motor: SiC/SiC NBR 80 80
Approvals: CE,EAC 55 %
60 60
Approvals for drinking water: ACS,DM174,UBA
Curve tolerance: ISO9906:2012 3B 40 40
Model: B
20 20
Motor version: T60 Eta pump = 73.1 %
Eta pump+motor+freq.converter = 65 %
Return valve: YES 0 0
0 5 10 15 20 Q [m³/h]
Materials:
P1
Pump: Stainless steel [kW]
Pump: EN 1.4301 12
Pump: AISI 304
10
Impeller: Stainless steel
8
Impeller: EN 1.4301
Impeller: AISI 304 6
Motor: Stainless steel 4
Motor: EN 1.4301
2
Motor: AISI 304
P1 (motor+freq.converter) = 9.641 kW
Installation: 0
Motor type: PM
Applic. motor: GRUNDFOS
Rated power - P2: 11 kW
Power (P2) required by pump: 11 kW
667
Mains frequency: 50 Hz
Rated voltage: 3 x 400 V
6
Rated current: 25 A
Rated speed: 1650-3000 rpm
L1 L2 L3 PE
Motor efficiency at full load: 92.2 %
Method of start: Direct-on-line (DOL)
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Built-in motor protection: NONE
Thermal protec: external
Built-in temp. transmitter: no
Number of cables: 1
Motor No: 76207717
U V W PE
Windings: Enamelled
Rpm related to frequency: 3000 rpm at 100 Hz
Controls: M
Frequency converter: VFD IPM type required 3
Description Value
General information:
Product name: CUE 3X380-500V IP20 15KW
Product No: 99616717 6.8
EAN number: 5713831974222
Price: EUR 0
Technical:
7.9
Approvals on nameplate: CE, CULUS, C-TICK
8
Installation:
12 140
Range of ambient temperature: 0 .. 45 °C
Relative humidity: 5-95 %
200
Mounted on: Wall
Electrical data:
Rated power - P2: 15 kW
Mains frequency: 50 / 60 Hz
380
Rated voltage [V]: 3 x 380-440/441-500 V
Rated current: 32-27 A
399
Maximum current consumption: 32 A
Efficiency at full load: 98 %
Enclosure class (IEC 34-5): IP20
Built-in motor protection: YES 165 248
200
Thermal protec: external
Cable length: 150/300 m
Others:
Net weight: 12 kg
Danish VVS No.: 382995150
Description Value
General information:
Product name: Sine-wave filter
Product No: 96754978
EAN number: 5700838641103
Price: EUR 0
Installation:
260
Mounted on: Wall
Electrical data:
Mains frequency: 50 Hz
Rated voltage: x 200-500 V 380 150
486
Rated current: 38 A
Rated current at 100 Hz: 26.5 A
Enclosure class (IEC 34-5): IP20
Cable size: 16 mm2
100
119
Others:
9
9 412 9
Net weight: 19.9 kg
Danish VVS No.: 382997038
Finnish LVI No.: 9414028