Professional Documents
Culture Documents
MCON MAGIC COAT S NEW FORMAT
MCON MAGIC COAT S NEW FORMAT
MCON MAGIC COAT S NEW FORMAT
WATERPROOFING SYSTEM
MCON MAGIC COAT S
SILICONE BASED WATER REPELLENT TRANSPARENT COATING
MCON
R A S A Y A N
Technical Specification
Appearance Clear to light yellow liquid
Base Silicone Based
Specific Gravity 1.0 ± 0.05
Drying Time 4 - 6 hours
Water repellency ( IS : 12027 : 1987) Repel water in bead form
Water absorption, % (After 24 hrs) ( IS : 12027 : 1987) 10 max
Application Instructions
Application Instructions
Clean the surface with wire brush or scrubber to Repair the spelled concrete portion by saw, cutting
remove hidden dirt, loose particles, laitance & dust. the extreme edges of the repair location to a depth
Decrease the surface by using suitable solvents. of at least 10 mm to avoid feather edging & to
Moisture level shall not be essentially more than provide strong bond.
5.0%.
Stir or mix well MCON MAGIC COAT S thoroughly
and carefully to achieve a homogeneous
consistency.
Avoid application on very hot substrate during a very
hot and wind conditions. Film formation may not be
uniform and gradual under such circumstance &
skinning on top surface may lead to formation of
blisters and bubbles due to entrapped vapour from
within the material.
1/2
Trusted Partner In Construction Chemicals
WATERPROOFING SYSTEM
MCON MAGIC COAT S
SILICONE BASED WATER REPELLENT TRANSPARENT COATING
MCON
R A S A Y A N
Application Coverage
The surface of application must be brought to a 40 - 45 Sq.ft./ ltr in 2 coats
touch dry state.
Apply first coat of MCON MAGIC COAT S with a stiff Packing
nylon brush/roller into the substrate, to ensure that
1 , 5 & 20 Ltr HDPE Cans
all small undulations are completely filled with the
coating.
Apply 2nd Coat of MCON MAGIC COAT S wet on wet, Shelf Life & Storage
to improve the penetration rate & performance and
12 months in original packing if stored at room
allow it to dry.
temperature i.e.25OC
Complete the application and leave to air cure for
2 days.
Precautions
Health & Safety Do not dilute
Use rubber hand gloves & safety goggles, while Close the container lid properly after use
using MCON MAGIC COAT S Do not use stainers or any other colourants
In case of contact with skin, wash with plenty of Stir well and strain before use
water.
Keep out of reach of children's.