Professional Documents
Culture Documents
SPCSP Catalog
SPCSP Catalog
June
2011
Standard Construction Features . . . . . . . . . .4-5 Options and Accessories . . . . . . . . . . . . . . . . . 6 SP Grill and Lighting Options. . . . . . . . . . . . . . 7 Control Accessories . . . . . . . . . . . . . . . . . . . .8-9 Filter and Discharge Accessories. . . . . . . . . . 10 Flat Roof Caps . . . . . . . . . . . . . . . . . . . . . . . . 11 Wall Discharge Accessories . . . . . . . . . . . .12-13 Sound Level Information . . . . . . . . . . . . . . . . 14 Energy Star Approval . . . . . . . . . . . . . . . . . . . 15
Model Number Code . . . . . . . . . . . . . . . . . . . 15 Model SP-A . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Model SP-B and SP-C . . . . . . . . . . . . . . . . . . 17 Model CSP-A . . . . . . . . . . . . . . . . . . . . . . . . . 18 Model CSP-B . . . . . . . . . . . . . . . . . . . . . . . . . 19 Model SP (50 cycle) . . . . . . . . . . . . . . . . . . . . 20 Model CSP (50 cycle). . . . . . . . . . . . . . . . . . . 21 Typical Specifications. . . . . . . . . . . . . . . . .22-23 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Greenheck Fan Corporation certifies that the SP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program. The SP models are not AMCA certified with 50 hertz motors.
Greenheck Fan Corporation certifies that the CSP models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program. The CSP models are not AMCA certified with 50 hertz motors.
Models SP and CSP are listed electric fans (UL/cUL 507). Ceiling Exhaust Fans are also UL Listed for above bathtub/shower with GFCI branch protected circuit. File no. E33599.
Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.
Fans that are ENERGY STAR qualified include: SP-A-50, 70, 90, 200, 250, 290 and 410 SP-B-50, 70, 80 and 90
Model Comparison
Location Mounting Airflow Application High Temp (above 200F ) Drive Type Impeller Type Performance
Ceiling Mounted
Spark Resistant
Propeller/Axial
General/Clean Air
Contaminated Air
SP CSP
1,600 3,800
Great things come in small packages, as do our ceiling fan SP models and cabinet fan CSP models. Be assured when you buy any Greenheck product, you are getting a quality product at a competitive price. In fact, we guarantee our SP and CSP ceiling and cabinet exhaust fans with a three-year warranty. We offer the most comprehensive ceiling and cabinet exhaust fan line in the commercial market. We are your market leader!
Benefits
Lowest sound in the industry Compact size Five different fan styles offering you a competitive price Broadest performance selections in the industry
Model SP-A
Description Premium Ceiling Fan: Best choice to meet sound requirements. Deluxe Ceiling Fan: Compact to fit most applications with quiet operation. Economy Ceiling Fan: Designed for light commercial applications.
min. height
Profile
min. sones
Sound
Air Volume
(maximum)
UL Listing UL/cUL Listed for above bathtub/shower with GFCI branch protected circuit (Sizes A390 and smaller) UL/cUL Listed for above bathtub/shower with GFCI branch protected circuit UL Listed
9 inches
(229 mm)
0.5
Ceiling Fans
(2718 m3/hr)
1,600 cfm
SP-B
7 inches
(178 mm)
1.2
(340 m3/hr)
200 cfm
SP-C
358 inches
(86 mm)
3.0
(85 m3/hr)
50 cfm
Inline Fans
Premium Inline Fan: CSP-A Outperforms the competition and is preferred by specifying engineers. Deluxe Inline Fan: CSP-B Compact design to fit in small remote spaces.
9 inches
(229 mm)
0.8
(6414 m3/hr)
3,775 cfm
UL/cUL Listed
7 inches
(178 mm)
1.5
(314 m3/hr)
185 cfm
UL/cUL Listed
Relative Cost
$ $
Mixed Flow
Recirculate
Centrifugal
Reversible
Hanging
Outdoor
Exhaust
Supply
Indoor
Direct
Wall
Belt
Model SP-A
5 8 6 4 2 1
Model CSP-A
6 8 5 4 1 2
3 10 9
12 11 10
12 11 13
Model SP-B
11 1 2 3 12
Model CSP-B
2 1
7 11 3 8 12 13 10
9 8 4 7 10
Model SP-C
1
11 10 3
12
SP-A
50-90 110-1550
50-200
50
110-3600
50-200
Power Assembly
Electrical Access Electrical Knockouts Acoustic Insulation Disconnect Electrical Junction Box Grille Mounting Brackets
5 6 7 8 9 10
60 cycle, 115v only
11 Housing
12 Motors
Domestic & International 50 cycle, 220v or 240v 60 cycle, 115v, 208v, 220v, 230v, & 277v options (See CAPS for availability) Gain easy access to internal components once installed
13 Access Panel
Exclusive Electrical access cover located on the housing exterior. This feature permits external wiring without removing Electrical the power assembly, saving installation time and cost. Available on models SP-A and CSP-A. Wiring Feature
Available for applications requiring 700 cfm or greater. Double-wide fans have two double-width forward-curved wheels, which are housed in separate scrolls, and driven by a single motor. Available on models SP-A and CSP-A.
Double-Wide Fans
Vertical Discharge
Exhaust outlet duct installed in the optional vertical position. The power assembly must be rotated to match the duct adapter position. Available on models SP-A and CSP-A.
Contractor 4 Packs
Save installation time and labor by installing the housing first, then installing the internal components after the sheetrocking, plastering and finishing is done. Housings are packaged in one box, power assemblies and grilles are packaged in another box. Components are shipped to coincide with the phase of your project. (Model SP-B only).
Wheel Options
Greenhecks ceiling and cabinet fans (models SP and CSP) deliver high performance from a forward-curved wheel. The forward-curved wheel design offers both high-efficiency and low sound. Fan wheels are constructed of polypropylene or steel as standard, and all models offer an aluminum wheel option. Level A models utilize steel or polypropylene wheel construction depending on size. Level B models are standard with a polypropylene wheel.
Model SP-B
SP-B Fan Hanging Vibration Isolation Ceiling Radiation Damper Fire Rated Ceiling Grille
Polypropylene
3 in. AxB
Steel
SP Model A50 - A190 B50 - B200 A200 - A390 A410 - A510 A710 - A780 A700 A900 - A1550 CRD 310 320 350 700 360 Length (A)
(343) (365)
Width (B)
(283) (311)
Height
(76) (76) (76) (76) (76)
13 2
1
11 8
1
3 3
1438
1214
18716
(468)
141516
(379)
3 3 3
Aluminum
24316
(614)
3
(311)
1214
15
24 16
(614)
14 16
(379)
All dimensions shown in inches (millimeters). Add an L to all CRD models if fan & light combo is used. *CRD is approximately 1/4 inch (6 mm) larger than housing dimension. (See Installation, Operation and Maintenance Manual)
Grille Options
Designer - standard grille Available in white polystyrene finish, with or without motion detector or time delay (see page 9 for motion detector and time delay information). Standard on SP models A50-A390 and B50-B200. Aluminum - grille option White enamel finish. Available for models A50-A390 and B50-B200. For models A410-A1550, only the aluminum grille is available. Stainless Steel - grille option Polished stainless steel finish. Available for models A50-A1550 and B50-B200.
Decorative - grille option White plastic finish, with or without light, motion detector or time delay (see page 9 for motion detector and time delay information). Available for models A50-A390 and B50-B200.
Control Accessories
Speed Controls
Speed controls may be used on model SP and CSP fans for manual adjustment of the fans performance (for final system balancing) or to control the fans output in confined spaces, such as conference or meeting rooms. The fan can be adjusted to 60% of design airflow with a speed control. This reduction in airflow and fan speed is also accompanied by a reduction in noise level. Solid state Internal Mounting speed controls are available for a range of applications up to 15 amps. Speed controls can be used to operate more than one fan if the combined total amperage of the fans do not exceed the control rating.
FULL VOLTAGE BLACK WHITE SPEED CONTROL VARIABLE VOLTAGE RED SWITCHED FULL VOLTAGE
Dotted line indicates for use with 10W switch only.
Switches
Switches may be used on model SP and CSP fans to enable manual control of your fan or fan and light combination. There are several options to fit your application. NEMA 1 - Single pole rocker switch assembly. Rated for, 115v, 15 Amp, 1/2 hp UL Listed Model MS-16 - Single pole rocker switch assembly with cover and pilot light. Rated for, 115v, 15 Amp, 1/2 hp UL Listed NEMA 1 - Two pole rocker switch assembly. Rated for, 220/230/240/277v, 20 Amp, 2 hp UL Listed Requires a 2x4 handy box.
EXTERNAL JUMPER
AUX DEVICE
120 VAC
LOAD
FAN
LOAD
For use with shaded pole and permanent split capacitor (PSC) motors. Available shipped loose or mounted internal or external. SPEED CONTROL INTERNAL AND/OR EXTERNAL MOUNTING OPTIONS Model Voltage Rating Amp Rating 5WSSC 115 - 127v 5 Amp 10WSSC 115 - 127v 10 Amp 15WSSC 115 - 127v 15 Amp 5W240 220 - 240v 5 Amp 8WSSC 220 - 240v 8 Amp 5W277 227v 5 Amp KEY: F a n S iz e s 50 I/E 70 I/E 80 I/E 90 110 125 150 190 200 250 290 390 410 510 700 710 780 900 1050 1410 1550 1750 2150 3600 I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E I/E No No No No No No
No
No
I/E
No
I/E
No
No
No
No No No
*E
No
*E
No
No
No No
No
No
No
No
No
No No No No I/E
E = External mounted only
I/E
I/E
I/E *I/E No No No No No No No No No
No
No
No
No
No
No
NOTES: Speed controllers are not available for 208v applications. SP-C50 Speed Controller is shipped loose only. All speed controller options listed in table are UL Listed. Handy Box sizes are 2x4 for all options above except 10WSSC and 15WSSC, which are 4x4.
Control Accessories
Time Delay Switch
Time delay switches save energy by automatically turning off equipment. They may be used with SP and CSP fans or fan and light combinations for extended operating time of fan. Time delay switches act in the same manner as a standard switch, however, there is a delay of 1 to 60 minutes after it has been turned off.
(500 Watt Max) LIGHT
Motion Detectors
Motion detectors may be used with SP and CSP fans or fan and light combinations. Motion detectors use a passive infrared motion detector to automatically turn the fan on when a change in motion is sensed. They have a viewing area of 180 degrees, however they must be placed in the line-of-sight. They also have an adjustable time delay shutoff setting of 1 to 20 minutes.
Black White Red Hot
BLACK
BLUE
Black
Hot
Motion Sensor
Model GTD A single switch controls both fan and light. Available shipped loose. Silent Operation Rated for 115v UL Listed Requires 2x4 handy box
Green Gnd. Red Neutral Load (12.5 Amps Max.) Fan Motor and/or Light Black Green White Ground Neutral
Wall Mount
Grille Mount
Transformers
Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. All transformers are shipped loose.
Models T-2.0 T-4.3 T-6.5 T-8.6 Voltage Ratings 230/277v to 115 230/277v to 115 230/277v to 115 230/277v to 115 Amp Ratings 2.0 Amps 4.3 Amps 6.5 Amps 8.6 Amps
Grille Motion Detectors are available on models up through size SP-A390 and SP-B200. Rated for 115v UL Listed Model MDW For use on fan or lights. Available shipped loose. Rated for 115v UL Listed Requires 2x4 handy box
115 V MOTOR
RJ-10x10 D C RCC-7
E A
Mesh Filter
RJ-10x10
RFC
RCC-7 SP Grille B
.24 .22 .20 .18 .16 Resistance in w.c. .14 .12 .10 .08 .06 .04
Model
B
1
Dia.
C
1
D
D
5
C
Throat 1.5 4 (38) (102) 6x9
E
1
Di
RFC
RJ-4
4 8 11 9GRS 4 5 16 4 2 C50, B50-B80 (279) (235) (210) (135) (114) diameter A B90-B200, A50-A390
(476) (362) (368) (264) (165) (152 x 229) (470) (699) (400) (600) (241) (254 x 254)
B RJ-6x9
GRSF
612 912
Dia. A
C
1.5
(38)
RJ-10x10 A410-A1050
10 x 10
Dia.
A Model
Dia. A
B 1.75 (44)
D A
Built-in damper
B For model SP and CSP sizes 50-290
8 9
.02
(254)
10
11.125
(283)
D B
A C
Filter 2 Area (ft ) 0.739 0.911 1.518 2.078
3.5 (89) 2.875 (73) 6.5 (165) D 1.625 (42) 3.375 (86) C E 5.125
(130)
Filter Loss Chart Filter Model Designer *Metal Grille Grille F-200 F-210 F-200 NA NA F-220 F-250 F-260
9.375 A (238)
11.5 (292)
10
4 (102)
A A
B B
E A GRS B
RCC-7
GRSF D
d RJ-6x9 Dia.
Weathertight aluminum B construction C RJ-10x10 D Integral birdscreen D Dia. C 1.5 Built-in curb cap (38) Dia. Requires roof curb A E
Model RCC-7 B
C
1.5
(38)
All aluminum exterior E B B construction Galvanized steel internal C D supports Integral birdscreen C 1.75 (44) Dia. D Dia. A Built-in flashing flange
A
Model For all sizes: A B
Dia. A
C
A
AFor all sizes:
50-390
B
A B C D 15 (381) 12 (305) 10 (254) 638 (162)
Dia. AD
2 (51)
Throat Dia.
7 (178)
10 (254)G 312 (89) 1214 (311) 11 (279) 414 (108) 16516 (414)
RFC
RFC
B Model GRS - Curb Cap
1/4-20 hanging support rod by exterior others
GRS A C
B
E
All aluminum B construction C Galvanized steel D Dia. internal supports Integral birdscreen Dia. A Built-in curb cap RJ-4 and RJ-6x9 A Requires roof curb D C
Model For all sizes: A B C
1.5 E B A (38) C Vibration isolator kits are available for suspended A D E installations. Kits include all hardware necessary C C A D to mount one unit, with the exception of 1/4-20 D D Fan mounting E threaded rod to be supplied by others. 1.75 (44) Dia. brackets include prepunched mounting holes for ease RJ-10x10 A of installation. D C A B
D Throat Dia. 1014 (260)
1/4-20 hanging support rod by others
Dia.
A C
D B 4 (102) dia. B
C 6.25
(159) A
E
6 (152) dia. GRS
Unit Size
4 (102) dia.
Model RFC-7 E
6.25
(159)
A 4 2 (114)
1
GRSF
B
Dia. A
B C D
B D A C
B 15 8 (397)
5
1458 (371) 1512 (394) 1958 Dia. (498) 2518 (638) A 2538 (645) 3634 (933) 4858 (1235) A
A
For all sizes: 50-390
(38)
D B
Model
A 18 (457)
RFC-7
dia.
6.25
(159)
B
D B
G F
A C
C A
E
11
RFC
B
C GRSF B C
(38)
B Model WC (Round Connection) Dia. Hooded Wall Cap A A Aluminum construction - aluminum finish For outside wall applications RCC-7 Built-in birdscreen (not available on WC-4) B and damper
B
A D
1.75 (44) Dia. Replaces the standard square discharge A duct-connector and damper RFC
B
GRSF
Dia.
A C E
C
1.5
(38)
E
Dia. A
C 1.75 (44)
A
E
Model Use with sizes: WC-4 C50
1/4-20 B50-B200, WC-6 hanging A50-A190
D
A
(165) (203) (279)
B
(152) (203) (279)
C
(102) (152) (203)
D
(70) (105) (130)
E
(127) (127) (89)
612 8
6 B 8
4 6 8
234
5 5
1
B A200-A510
418 5 8
1
D B
11
11
3 2
A C
C A
4 (102) dia.
6 5/32
(157)
Not recommended for exterior applications exposed to severe weather conditions. An external wall louver is recommended for such applications.
4 15/16
(157)
4 15/32
(114)
E
D
A
B 6 (152) dia.
Model 473324
6.25
(159)
A50-A90 A110-A190*
All dimensions shown in inches (millimeters). * Used in conjunction with RDC-6 Model Use with all sizes: A
(305) (502)
B
(133) (203)
C
(254) (457)
D
(197) (229)
E
(89) (152)
12
514 8
10
734 9
312 6
1934
18
12
GRS
GRSF
1.75 (44) Dia. (Square or Rectangular Connections) Dia. A A Steel construction with black enamel finish For outside wall applications Built-in birdscreen and damper
G
D B
20
WL-18x6 RJ-10x10
C A D
E
10 9 8 7 6 5 4
Model
A 5 2
1
B 12 4
3
C 3 2
1
D
1
E
1
F 4 4
1
G 5 5 5
(140) (260)
1
(324) (260)
1
(260) (210)
1
10 4 11 8 814 814
1
BVE-157, WC-18x8 BVE-128, WC-8x8 WC-8 WC-10x3, WC-6, RJ-6x9, EL-10x3, WL-10x3, BVE-808, RFC-7, RCC-7
1014 1014 10 4 20 4
814 8 4
1
634 6 4
3
WC-18x8 700-1550
(260)
(514)
(464)
18 4 18 4
.01
.02
.03
.2
.3
.4
.5
.6
25
9)
A 818
(206)
B 734
(197)
C 4
(102)
12
(305)
734
(197)
4
(102)
1558
(397)
734
(197)
4
(102)
13
What is a sone?
Sones are an internationally recognized unit of loudness. In practical terms, the loudness of one sone is equivalent to the sound of a quiet refrigerator measured from five feet away in an acoustically average room. A sone is a single number rating, which indicates the inlet noise derived from the eight audible octave bands. Sones are a linear measurement of sound level. For example, a sound level of 10 sones is twice as loud as 5 sones.
Fiberglass
Remote mounted model CSP with vibration isolators and insulated ductwork provides the quietest installation.
Model SP mounted directly overhead may be too loud for sound critical applications.
Hotel rooms, libraries, movie theatres, executive offices Schools and classrooms, hospital wards and operating rooms Court rooms, museums, apartment houses, private homes (urban) Restaurants, lobbies, general open offices, banks Corridors and halls, cocktail lounges, washrooms and toilets Hotel kitchens and laundries, supermarkets
When room sound levels are critical, such as in executive offices, conference rooms, hospital operating rooms, and school study areas, a CSP fan is the best choice. Shown here is a comparison of SP and CSP fans of the same size, with equal performance in typical installations. The CSP shows lower sone values.
Model SP-A410 CSP-A410 CFM 405 403 WG 1/8 1/8 FRPM 1000 1000 Sones 3.0 1.5
Reprinted from AMCA Publication 302 (Application of Sone Ratings for Non-ducted Air Moving Devices, with roomsonedBA correlations) with the written permission from the AMCA International, Inc., 30 West University Drive, Arlington Heights, IL 60004-1893. NOTE: Values above are for room loudness and are not sound ratings. Room loudness is the resulting level in a conditioned space after the acoustical qualities of the room have been accounted for.
14
Variable Volume
Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.
SP - A 50 FL
Light Options: L - Fan/Light (Incandescent) Combination FL - Fan/Light (Fluorescent) Combination
Nominal cfm at 0.10 inches static pressure
Level of Construction: A - Premium unit; lowest sound, insulated housing B - Deluxe unit; low sound, low profile C - Standard unit; lowest profile, inexpensive Model: SP - Silent Partner CSP - Cabinet Silent Partner
15
Model SP-A
SP-A 50-90
B 3 15/16 A E C D
B
(270) (270) (302) (365) (295) (365) (365)
C
(229) (229) (286) (368) (295) (368) (368)
D
(152)
E 6
1314
9 9
A E
1314 14 18
1114
1478 x 1314
17
(11) (14)
24 D 31
1438 1158
1412 1158
8 8 8 8
1938 x 1638
(492 x 416) (638 x 343) (492 x 416) (635 x 416)
2358 18
1912 10
34 34 56
B E C
1438 1438
1412 1412
2334
1834
All dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings. * Sizes 410 and larger have an aluminum grille as standard.
D B A E
0.875 1
B
*Note: Amp draw is approximate and may vary based on motor manufacturer.
Model SP-A502, 3, 5 SP-A702, 3, 5 SP-A902, 3, 5 SP-A1102, 3, 4, 5, 6 SP-A1252, 3, 5, 6 SP-A1902, 3, 4, 5, 6 SP-A2002, 3, 5 SP-A2502, 3, 5 SP-A2902, 3, 4, 5 SP-A3902, 3, 4, 5 SP-A4103 SP-A5103, 4 SP-A7003 SP-A7103 SP-A7803, 4 SP-A9003 SP-A10503, 4 SP-A14103 SP-A15503, 4
Amps* Watts 0.31 0.27 0.34 0.58 0.62 1.30 0.43 0.77 0.72 1.34 1.74 3.30 3.20 4.40 3.30 4.00 6.30 7.40 8.60 18.3 20.2 29.4 48.7 52.5 113 48.2 83.1 80.7 135 121 224 350 285 348 285 420 786 818 CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones
900 1000 1050 1350 1000 1070 1100 1080 1600 950 1095 1450 1610
0 76 0.5 83 0.8 99 0.8 119 0.8 135 0.9 216 2.5 247 1.4 272 2.5 315 2.5 410 4.5 443 3.5 557 5.0 757 5.0 752 6.0 812 8.5 955 4.0 1125 6.0 1455 10.0 1607 10.5
0.1 51 0.7 70 0.8 88 1.0 110 0.8 123 1.2 197 2.5 225 2.0 251 2.5 293 2.5 395 4.5 413 3.0 512 4.5 730 5.0 714 6.0 782 8.5 907 5.0 1059 6.0 1415 10.0 1558 10.0
DC E CFM / Static Pressure in Inches wg 0.125 0.25 0.375 0.5 0.625 C 0.75
48 0.8 67 0.8 84 0.9 106 1.0 121 1.3 192 2.5 220 2.0 246 2.5 287 2.5 391 4.5 405 3.0 501 4.5 723 5.0 701 6.0 775 8.5 896 5.0 1043 6.0 1404 10.0 1558 10.0 31 1.3 42 1.6 61 1.2 88 1.1 104 1.3 167 2.5 196 2.5 227 2.5 257 3.0 368 4.5 351 3.0 439 4.5 700 5.5 653 6.0 741 8.0 841 5.0 964 6.0 1353 10.0 1506 10.0
F B 25
1.4
A E DC C
133 2.5 172 3.0 210 3.5 231 3.0 345 5.0 306 3.5 392 4.5 679 5.5 588 6.0 704 8.0 773 5.0 885 5.5 1307 10.0 1449 10.0
B
142 3.5 185 4.0 207 3.5 325 5.0 325 4.0 649 6.0 486 5.5 665 8.0 701 5.0 796 5.5 1262 10.0 1407 10.5 105 3.5 157 4.0 175 3.5 307 5.5 67 4.0 119 4.0 C 124 4.5 279 5.5
A E
613 6.0 320 5.5 625 8.0 662 5.5 1218 10.0 1369 11.5
494 6.5
396 6.5
2 Available with light 3 Available with CRD - Ceiling Radiation Damper 4 Also available with 50 Hz motors (See page 20 for performance)
5 UL Listed for use above tubs. 6 Available with 277 volt motor.
Performance certified is for model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for installation type B: free inlet spherical fan sone levels.
16
B B
Decorative Unit Grille Weight
(4)
B
(292) (292)
C*
(179) (179)
D 6
Designer Grille
A E DC C F
1378 1378
1112
1112
114 (152) (32) 1478 x 1314 1514 (387) sq. 6 114 (378 x 337) (152) (32)
10
(5)
All dimensions are in inches (millimeters) and weight in pounds (kilograms). *Add 11/2 in. (38 mm) to C dimension for incandescent light. Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings.
*Note: Amp draw is approximate and may vary based on motor manufacturer.
Amps* Watts 0.50 0.53 0.60 0.65 1.14 37.8 45.1 54.3 49.7 80.2 128 CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones
A E 172 2.20
0 67 1.2 77 1.2 87 2.0 101 1.5 133 1.5 160 2.5 197 3.5
0.1 54 1.4 71 1.4 80 2.0 89 2.0 114 1.5 156 2.5 195 4.0
0.125 51 1.4 68 1.4 78 2.5 88 2.0 110 1.5 155 2.5 194 4.0
CFM / Static Pressure in Inches wg 0.25 0.375 0.5 0.625 40 29 2.0 3.0 57 49 39 2.0 2.5 3.0 68 61 54 44 2.5 3.0 3.5 4.5 75 59 45 30 2.5 3.0 3.5 4.0 97 95 94 91 2.0 2.0 2.0 3.0 154 152 147 B A 149 3.0 3.5 3.5 4.0 191 187 184 181 E 4.5 4.5 5.0 5.0
0.75
0.875
30 4.5
2 Available with light C D 3 Available with CRD - Ceiling Radiation Damper 4 Also available with 50 Hz motors (See page 20 for performance)
C 5 UL Listed for use above tubs. D 6 Available with 277 volt motor.
Performance certified is for model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for installation type B: free inlet spherical fan sone levels.
A E D
B
(191)
C
(92)
D 3
E
(41) E
AF
1/2
(13)
712
712
358
(76)
158
D1Cx 9 9 4
(2)
All dimensions are in inches (millimeters) and weight in pounds (kilograms). For complete dimensional information, see CAPS submittal drawings.
C F
*Note: Amp draw is approximate and may vary based on motor manufacturer.
Model SP-C50
RPM 1680
Amps* 0.80
CFM / Static Pressure in Inches wg 0 52 3.0 0.1 49 3.0 0.125 49 3.0 0.25 0.375 47 44 3.0 B 3.5 0.5 38 4.0 0.625 29 4.0
Performance certified is for model SP exhaust for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown E are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for installation type B: free inlet spherical fan sone levels.
17
Model CSP-A
F
G
(235) (254) (337) (267) (337) (337) (330) (371)
CSP-110-510
B C E G D A
CSP-700-3600
B
(270) (302) (365) (295) (365) (365)
C
(229) (286) (368) (295) (368) F 1 (368) (375) (419)
D
(203) (203) (203) (495) (254) (476) (711)
E
(152) (203) (203) (203) (203) (203) (152)
F
(305) (327) (429) (575) (429) (575) (832) C
Unit Weight 16
(7) (10) (16) (15) (16) (27) (31)
1314 14 18
1058 1178
6 8 8 8 8 8 6
12
914 10
1114
8 8
1278 1678
23 36 34 36 59 68
1438 1158
1412 1158
1314
2358 18
1912 10
1412
F Inlet
2334 35
14 2 1434
1834 28 40
A D - diameter C C
E
0.75 0.875 1
4512
G 12 16
(375) (419)
1612
1458
122
(55)
All dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings.
D A
B
Model CSP-A110 CSP-A1256 CSP-A1904, 6 CSP-A200 CSP-A250 CSP-A2904 CSP-A390 CSP-A410 CSP-A510 CSP-A700 CSP-A710 CSP-A7804 CSP-A900 CSP-A10504 CSP-A1410 CSP-A15504 CSP-A1750 CSP-A2150 CSP-A3600 RPM 950 1100 Amps* 0.62 0.63 Watts
*Note: Amp draw is approximate and may vary based on motor manufacturer.
FxG
0.43 0.79 0.71 1.33 1.87 3.11 3.20 4.40 3.77 4.87 6.65 7.80 8.32 6.60 7.80 7.10
1000 1050 1350 1000 1070 1100 1080 1600 950 1095 1450 1610 1130 1100 1100
0 0.1 0.125 0.25 0.375 CFM 124 112 110 102 B 77 48.7 Sones 0.8 0.8 0.8 0.9 0.9 CFM 138 126 124 114 91 52.5 diameter 1.0 Sones 1.1 D -1.1 1.1 1.2 CFM 215 202 198 180 159 100 Sones 2.0 1.5 2.0 2.0 2.5 CFM 254 231 226 203 178 48.2 Sones 0.6 C 0.4 0.5 0.9 1.0 CFM 266 246 241 221 205 82.7 Sones 0.9 1.0 1.0 2.0 2.5 CFM 318 E299 292 265 248 80.7 Sones 1.1 1.2 1.3 2.0 2.5 CFM 412 400 397 382 363 Sones 2.0 2.0 2.0 2.5 3.0 B 140 A CFM 447 441 403 364 317 135 Sones 1.5 1.5 1.5 2.0 2.0 CFM 545 514 506 464 405 217 Sones 2.5 2.0 2.0 2.0 2.0 CFM 766 755 752 739 726 350 Sones 2.0 2.0 2.0 2.0 2.0 CFM 737 698 688 635 567 325 Sones 2.5 2.5 2.5 2.5 2.0 CFM 813 784 777 742 707 405 Sones 3.0 3.0 3.0 3.0 3.0 CFM 908 852 841 782 715 328 Sones 1.4 1.4 1.4 2.0 2.5 CFM 1182 1110 1093 1013 922 455 Sones 2.5 2.5 2.5 2.5 2.5 CFM 1584 1543 1533 1483 1439 822 Sones 3.5 3.5 3.5 3.5 3.5 CFM 1672 1618 1604 1543 1484 830 Sones 5.0 4.5 4.5 4.5 4.5 CFM 1842 1768 1749 1619 1464 550 Sones 5.0 5.0 5.0 4.5 4.0 CFM 2249 2175 2156 2044 1900 735 Sones 5.0 4.5 4.5 4.0 4.0 CFM 3778 3653 3622 3460 3280 1330 Sones 5.0 5.0 5.0 5.0 4.5 motors (See page 21 for performance) 6 Available with
A
121 2.5 145 1.3 187 3.0 229 3.5 339 4.0 217 2.0 324 2.5 702 2.0 475 2.0 672 2.0 631 3.0 832 2.5 1395 3.5 1427 4.0 1284 4.0 1701 4.0 3091 4.0 277 volt
678 2.0 334 2.0 638 3.0 743 2.5 1345 3.5 1367 4.0 1032 3.5 1424 3.0 2844 4.0 motor.
1293 3.5 1307 4.5 772 3.0 1114 3.0 2551 4.0
1750 3.5
Performance certified is for model CSP inline for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for installation type D: ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on 10 ft of insulated duct. The AMCA Certified Ratings Seal applies to air performance ratings only.
18
Model CSP-B
F Inlet
D - diameter
G
(83)
F
(260)
Inlet FxG
114
1014
314
C
E
All dimensions are in inches (millimeters) and weight in pounds (kilograms). Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings.
*Note: Amp draw is approximate and may vary based on motor manufacturer.
CFM / Static Pressure in Inches wg 0 103 1.5 151 2.0 186 3.0 0.1 100 1.5 150 2.0 184 3.0 0.125 100 1.5 149 2.0 184 3.0 0.25 98 2.0 148 2.0 182 3.0 0.375 97 2.0 144 2.5 181 3.5 0.5 96 2.0 146 2.5 179 3.5 0.625 94 2.5 142 3.0 175 3.5 0.75 86 2.5 135 3.0 170 3.5
Performance certified is for model CSP inline for installation type D: Ducted inlet, Ducted outlet. Performance ratings include the effects of a backdraft damper. Speed (rpm) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in spherical fan sones at 5 ft (1.5m) in a spherical free field calculated per Annex B of AMCA 311. Values shown are for installation type D: ducted inlet spherical fan sone levels. Ratings do not include the effect of duct end correction. Ratings are based on 10 ft of insulated duct. The AMCA Certified Ratings Seal applies to air performance ratings only.
19
Model SP
50 Cycle Performance
For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance B for ceiling mounted exhaust fans model SP. Same dimensions and outlet options E
C A
SP-A 110-510, 710, 780 SP-A 50-90
B 3 15/16 A E C D
A E
Model SP Dimensions
SP-A 50, 70, 90 110, 125, 190 200, 250, 290, 390 410, 510 710, 780 900, 1050, 1410, 1550 SP-B 50, 70 & 80 90, 110, 150, 200 A
(337) (337) (356) (457) (457) (603)
B
(270) (270) (302) (365) (365) (365)
C
(229) (229) B (286) (368) (368) (368)
D
(152)
E 6
Designer Grille*
1314 1314 14 18 18
(203) (152) (203) (203) (203) (203) (254) (203) (476) (203)
8 8
6 8
1478 x 1314
(378 x 337)
1114
17
(11)
24
8 E 8 8 8
1938 x 1638
(492 x 416) (492 x 416) (635 x 416)
DC
10
C 34
56
(14) (15)
31
2334
1834
F (25)
Decorative Unit Grille Weight 15 4 (387) square
1
SP-B 50-200
B A E A A E E DC DC C F C F
0.250 88 1.6 167 3.1 262 3.7 368 5.7 315 3.1 591 8.2 769 6.6 1211 10.5 75 3.0 97 2.4 154 3.7 191 5.1 0.375 0.500
Outlet connection width is 1 in. (25 mm) - Mounting bracket width is 11/2 in. (38 mm).
A
(352) (352)
B
(292) (292)
C
(178) (152)
D 6
Designer Grille
1378 1378
1112
7 7
1112
114 1478 x 1314 (152) (32) (378 x 337) 6 114 1478 x 1314 (152) (32) (378 x 337)
(4)
10
(5)
B B
All dimensions are in inches (millimeters) and weight in pounds (kilograms). *Add 11/2 in. (38 mm) to C dimension for incandescent light. Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings. *Sizes 410 and larger have an aluminum grille as standard.
*Note: Amp draw is approximate and may vary based on motor manufacturer.
D
0.125 106 1.2 192 2.9 296 3.3 392 5.4 388 3.3 633 8.7 886 6.8 1279 10.6 88 2.7 110 2.2 155 3.3 194 4.7 0.150 103 1.3 187 2.9 290 3.4 387 5.5 376 3.3 625 8.6 867 6.8 1266 10.6 86 2.7 107 2.2 155 3.4 194 4.9
Model SP-A110
(50 Hertz Motor)
RPM 950 1400 1050 1350 900 1334 950 1340 700 950 1050 1100
Amps* 0.29 0.65 0.36 0.67 1.65 1.65 3.15 4.3 0.325 0.57 0.85 1.1
Watts 49 113 81 135 224 348 420 818 50 80 129 173 CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones
CFM / Static Pressure in Inches of wg. 0.000 119 1.3 216 3.2 329 3.2 410 5.4 447 3.7 677 8.8 990 7.2 1337 11.1 102 1.9 133 2.0 160 3.0 197 4.4 0.050 115 1.3 206 3.0 315 3.3 402 5.4 425 3.5 659 8.9 945 7.0 1314 10.7 97 2.2 124 2.0 158 3.1 196 4.7 0.100 110 1.2 197 2.8 302 3.3 395 5.4 400 3.3 642 8.8 905 6.8 1290 10.6 92 2.6 114 2.1 156 3.3 195 4.6
SP-A190
(50 Hertz Motor)
SP-A290
(50 Hertz Motor)
SP-A390
(50 Hertz Motor)
SP-A510
(50 Hertz Motor)
SP-A780
(50 Hertz Motor)
SP-A1050
(50 Hertz Motor)
SP-A1550
(50 Hertz Motor)
SP-B90
(50 Hertz Motor)
SP-B110
(50 Hertz Motor)
SP-B150
(50 Hertz Motor)
SP-B200
(50 Hertz Motor)
133 3.4 222 4.0 345 6.0 159 2.6 544 8.1 531 6.5 1161 11.6 59 3.6 95 2.7 152 4.3 187 5.6
C
493 8.1
Model SP with 50 hertz motor is not AMCA certified or ENERGY STAR qualified.
20
Model CSP
50 Cycle Performance
For uses in countries with 50 cycle (50 Hz) power, Greenheck offers the same reliability and performance for inline cabinet fans model CSP. Same dimensions and outlet options Performance shown in 50 cycle RPMs Full line of discharge accessories available
CSP-A 110-510, 710, 780
F G E B D A C G
B
(270) (302) (365) (295) (365) (365) (375) (419)
C
(229) (286)
E
(152) (203) (203) (203) E (203) (203) (152)
F
(305) (327) (429) (575) (429) (575) (832)
G
(235) (254) (337) (267) (337) (337) (330) (371)
Unit Weight 16
(7) (10) (16) (15) (16) (27) (31)
F G
F Inlet B C
1314 14 18
1058 11 8
7
F (203)
(203) (203) (495) (254) (476) (711)
6 8 8 8 8 8 6
12
7
B EE
11 4
1
8 8
12 8 1678
10
23 36 34 36 59 68
1438 1158
G (368)
(295) (368) (368) (375) (419)
1412 1158
1314 C
A D A D C
G D - diameter C
E
2358 18
1912 10
2258
1412
D 1678 A 2258
3234
F Inlet
2334 35
1412 1434
1834 B 28 40 D 6
4512 A
1612 B
1612 C 7
1458 G 314
122
(55)
D - diameter C
E
Unit Weight
(178) (5) Inlet (152) (32) (260) (83) All dimensions are in inches (millimeters) and weight in pounds (kilograms). Inlet and outlet connection widths are 1 in. (25 mm) - FxG Mounting bracket width is 11/2 in. (38 mm). For complete dimensional information, see CAPS submittal drawings. C
(352)
1378
(292)
1112
E
*Note: Amp draw is approximate and may vary based on motor manufacturer.
Model CSP-A110
(50 Hertz Motor)
RPM 950 1400 1350 1334 950 1340 950 1050 1100
Amps* 0.31 0.55 0.665 1.885 3.325 4.16 0.57 0.85 1.1
B
0.000 CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones CFM Sones 124 1.1 215 2.3 412 2.8 685 5.0 1079 6.3 1391 7.5 103 2.0 151 2.5 186 3.4
A
0.050 116 1.1 202 2.0 400 2.7 656 4.9 1031 6.3 1326 7.4 102 1.9 150 2.7 185 3.7
CFM / Static Pressure in Inches of wg 0.100 112 1.1 198 2.2 397 2.8 648 4.8 982 6.0 1311 7.4 100 2.0 149 2.7 184 3.6 0.125 110 1.1 180 2.7 382 3.2 609 4.7 957 5.9 1240 7.3 99 2.1 149 2.7 183 3.7 0.150 109 1.1 159 2.9 363 3.7 562 4.6 934 5.9 1171 7.4 99 2.1 149 2.7 183 3.7 0.250 102 1.3 121 3.0 339 4.7 520 4.7 841 6.0 1098 7.3 98 2.3 148 2.9 182 4.0 324 5.5 481 4.9 655 5.5 1019 7.3 97 2.6 148 3.1 180 4.1 929 7.2 96 2.7 145 3.4 178 4.1 93 3.1 142 3.6 175 4.3 309 6.5 0.375 77 1.3 0.500 0.625
CSP-A190
(50 Hertz Motor)
CSP-A390
(50 Hertz Motor)
CSP-A780
(50 Hertz Motor)
CSP-A1050
(50 Hertz Motor)
CSP-A1550
(50 Hertz Motor)
CSP-B110
(50 Hertz Motor)
CSP-B150
(50 Hertz Motor)
CSP-B200
(50 Hertz Motor)
Model CSP with 50 hertz motor is not AMCA certified or ENERGY STAR qualified.
21
Model SP Specifications
Model SP-C50
Ceiling mounted exhaust fans shall be of the centrifugal direct drive type. The fan housing shall be constructed of galvanized steel. The polypropylene duct collar shall be a sleeve for ease of connection to 3 inch (76 mm) and 4 inch (102 mm) round ductwork and shall include a backdraft damper. The grille shall be constructed of non-yellowing high-impact polystyrene and attached to the housing with torsion springs. The wheels shall be constructed of high-strength polymer. The access for wiring shall be easily accessible internally. The motor disconnect shall be internal and of the plug-in type. All fans shall bear the AMCA Certified Ratings program AMCA Sound and Air Performance seal. Model SP-C50 shall be UL Listed. Fans shall be model SP-C50 as supplied by Greenheck Fan Corporation, Schofield, Wisconsin.
*Model SP-C fans with 50 hertz motors are not AMCA certified or ENERGY STAR qualified.
Complete specifications, in Construction Specifications Institute (CSI) format, are available on greenheck.com. 22
Complete specifications, in Construction Specifications Institute (CSI) format, are available on greenheck.com. 23
SP-A Models
SP-B Models
Our Warranty
Greenheck Fan Corporation warrants its SP/CSP products to be free of any defect in material or workmanship for a period of three years from the date of shipment. In the event of such a defect during the warranty period, Greenheck Fan Corporation agrees, at its option, to either repair or replace the defective product free of charge. This warranty runs to the original purchaser of such SP/CSP products for a period of three years from the date of shipment. Any product repaired or replaced under this warranty will, itself, be warranted only for the remainder of the warranty period of the original product being repaired or replaced. All light bulbs are excluded under this limited warranty. Greenheck Fan Corporation is not responsible for any removal, installation, or transportation cost. As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications without notice.