Professional Documents
Culture Documents
045902_Rev A_A450 Otosuite General Software Overview
045902_Rev A_A450 Otosuite General Software Overview
EDUCATION RESOURCE
Speech Testing
Load Test Type: Click the appropriate test button to begin (e.g.,
, , , ) red for right or blue for left ear
Select Wordlist: Select the desired wordlist from the
dropdowns if the list did not prepopulate
Changing Intensity: press the up/down arrow keys on
keyboard, or click the on-screen blue arrows
Presenting Words: click Play or press F5 key on keyboard,
or hover to the left of the word and select play manually
Scoring Test: Press the plus and minus keys on keyboard, or
click the on-screen buttons or ; this also allows for
advancement of the words when “Play On Count” is enabled
Storing Results: press the S key on keyboard, or click the on-
screen Store button
Additional Options – from the control panel, choose the Test Type: Select the test type from the icons
following: To perform speech testing to both ears at different intensities:
Input: Select from Monitored Live Voice or embedded wordlists
Click on the Masking hyperlink and select either
by clicking the icons Mic or Source A
Page 1 of 2
Click on the icon to open the Monitor and Level box. Set Options
Check Stim, Mask, Talkback to activate/deactivate monitors for
Open Test Selector for Quick Set-up (can
each also use F8)
Adjust Volume/Sensitivity Level: Click the corresponding
Show Help (can also use F1)
up/down arrows to adjust each stimulus as needed
*Note: Source A and Source B can only be adjusted if the Input Navigate to Otosuite modules (can also use
under Test Options is set to either Int. File or Line In as F8)
calibration has been programmed into the embedded word lists Connect to On-screen Controls for Device
New Audiogram
Select Orientation
Page 2 of 2