Professional Documents
Culture Documents
MB22048 WHT 01 00 UserManual Lo Res
MB22048 WHT 01 00 UserManual Lo Res
WHAT’S INCLUDED
Motion Lighting
Number Auto Shut Off Optional OFF Switch Lumens
Sensing IP Rating Mode
of LEDs (seconds) Switch
Range (ft.)
INSTALLATION
1. Use the pin (included) to select the lighting 2. Determine the mounting location. 3. Place the light in the optimal location
mode (See 'Lighting Mode' chart above). Insert We recommend a mounting height and mark the holes for mounting.
the pin through the hole that corresponds to of 6.5-8 feet in an area that receives Pre-drill and use the provided anchors
the desired lighting mode. The light will flash, direct sunlight. if necessary. Drive the screws through
indicating the mode is set. the holes at the top of the light being
Note: The pin can be stored on the back of the mindful to not over-tighten.
unit as shown.