Professional Documents
Culture Documents
SUNRISE CATALOGUE 2019
SUNRISE CATALOGUE 2019
QUALITY
HONESTY
诚信赢得市场,质量铸就品牌
QUALITY MAKE BRAND, HONESTY WIN MARKET
www.sunrise-machine.com
B b PRODUCT FEATURE
TAPM1010
Feeding speed and punching speed are very fast, greatly improve the production efficiency. For
HIGH SPEED CNC PUNCHING, MARKING & SHEARING LINE FOR ANGLES
50×50×4mm angles, it can process 9 to 10 tons per 8 hours.
The pressing angle device, feeding carriage, material supporting device, and clamping claws all
have obtained national patents protection.
Adopt PLC mold control, servomotor feeding, high efficiency, stable processing precision.
A a APPLICABLE INDUSTRY
Easy programming, adopt instruction programming and lofting software. It can read .NC1 files
This machine is the automatic special production line used for angle steel marking, punching (round generated by TEKLA software.
hole, slot hole) and shearing, mainly in the field of angle steel tower industry, electric power fittings, All marking, punching and shearing in automatic completeness, all finished angles can be
structure storage facilities, and steel structure construction industries etc. unloaded by pneumatic turnover device so as to lighten the working strength.
Marking unit adopts closed frame with good rigidity.
Single blade shearing, save raw material.
The feeding conveyors use double linear guides, and the carriage is latest design, which improve
the speed and accuracy.
C C SPECIFICATIONS
Max. punching (D×T) (mm) Ф26×10 Round holes Ф26×10 Slot hole 22x50mm
CNC axis 3
Net Weight of machine (Kg) About 13000 About 14000 About 14300
PAGE 01/02
www.sunrise-machine.com
B b PRODUCT FEATURE
TAPM1010C
Feeding speed and punching speed are very fast, greatly improve the production efficiency. For
HIGH SPEED CNC PUNCHING, MARKING & SHEARING LINE FOR ANGLES
50×50×4mm angles, it can process 9 to 10 tons per 8 hours.
This machine is improved on the basis of the ordinary angle steel line, designed special for
processing the small angles that used in the communication tower.
Single blade shearing, no scraps.
A a APPLICABLE INDUSTRY It can process small size angle 40mm.
The automatic feeding device adopt high technology, AC servo motor with gear rack drive, high
This machine is the automatic special production line used for angle steel marking, punching (round
precision with stable quality. The new design of clamp rod adopt the pneumatic lift, high speed
hole, slot hole) and shearing, mainly in the field of angle steel tower industry, electric power fittings,
and efficiency.
structure storage facilities, and steel structure construction industries etc.
The pressing angle device, feeding carriage, material supporting device, and clamping claws all
have obtained national patents protection.
Easy programming, adopt instruction programming and lofting software. It can read .NC1 files
generated by TEKLA software.
All marking, punching and shearing in automatic completeness, all finished angles can be
unloaded by pneumatic turnover device so as to lighten the working strength.
C C SPECIFICATIONS
Model TAPM1010C
Qty. of punch on A side (piece) 3 (1 for round hole, 2 for slot holes)
CNC axis 3
PAGE 03/04
www.sunrise-machine.com
B b PRODUCT FEATURE
TBL1412/TBL1412A/TAPM1412(ENHANCED)
Advanced angle supporting device, has obtained the national patent certificate, which improve
CNC PUNCHING, MARKING & SHEARING LINE FOR ANGLES
the angle processing accuracy.
TBL1412,TBL1412A two sets of punches on each side, TAPM1412 three sets, can process all
holes once time.
TBL1412A,TAPM1412 Single blade shearing, save raw material.
A a APPLICABLE INDUSTRY Numerical control processing, the operation is very convenient, can realize automation, high
precision, many varieties, mass production.
This machine is the automatic special production line used for angle steel marking, punching, and
Marking unit adopts closed frame with good rigidity. On the marking unit is equipped with four
shearing mainly in the field of angle steel tower industry, electric power fittings, structure storage
groups of programmable selection box.
facilities, and steel structure construction industries etc.
With avoided shearing functions, so as to process fixed-length angles.
All marking, punching and shearing in automatic completeness, all finished angles can be
unloaded by pneumatic turnover device so as to lighten the working strength.
Easy programming, adopt instruction programming and lofting software. It can read .NC1 files
generated by TEKLA software.
C C SPECIFICATIONS
Net Weight of machine (Kg) About 14500 About 14800 About 16500
PAGE 05/06
www.sunrise-machine.com
B b PRODUCT FEATURE
TAPM1516/TAPM1516S(ENHANCED)
Adopt CNC technology, servo motor feeding, with high efficiency, stable work-piece precision. Key
CNC PUNCHING, MARKING & SHEARING LINE FOR ANGLES hydraulic, pneumatic and electric parts all famous brands.
There are three sets of punch and die on each side which can install three kinds of punches with
different diameters. Three sets of moulds can move together controlled by PLC to change the back
mark.
A a APPLICABLE INDUSTRY Software with Chinese/English interface, easy operation, and can display the drawing of workpiece.
Easy programming, adopt instruction programming and lofting software.
This machine is the automatic special production line used for angle steel marking, punching, and
CNC infeed carriage is driven by servo motor, ensure high positioning precision.
shearing, mainly in the field of angle steel tower industry, electric power fittings, structure storage
All marking, punching and shearing in automatic completeness, all finished angles can be unloaded
facilities, and steel structure construction industries etc.
by pneumatic turnover device so as to lighten the working strength.
The control system consists of the computer, servo motor, PLC, external examination sensors, etc.
Marking unit adopts closed frame with good rigidity. Four groups of character boxes are fixed on the
marking unit which can be selected by program.
Single blade shearing, shearing section is smooth and save raw material.
C C SPECIFICATIONS
CNC axis 3 3
PAGE 07/08
www.sunrise-machine.com
B b PRODUCT FEATURE
TBL2020/TAPM2020/TAPM2020A/TAPM2020C Advanced angle supporting device, has obtained the national patent certificate, which improve
CNC PUNCHING, MARKING & SHEARING LINE FOR ANGLES the angle processing accuracy.
Three sets of punches on each side, can process all holes once time.
TBL2020, TAPM2020 Double blade shearing ,for high tensile large angles. TAPM2020A,
TAPM2020C Single blade shearing, save raw material.
Numerical control processing, the operation is very convenient, can realize automation, high
precision, many varieties, mass production.
A a APPLICABLE INDUSTRY Marking unit adopts closed frame with good rigidity. On the marking unit is equipped with four
This machine is the automatic special production line used for angle steel marking, punching, and groups of programmable selection box.
shearing mainly in the field of angle steel tower industry, electric power fittings, structure storage With avoided shearing functions, so as to process fixed-length angles.
facilities, and steel structure construction industries etc. All marking, punching and Cutting in automatic completeness, all finished angles can be unloaded
by pneumatic turnover device so as to lighten the working strength.
Easy programming, adopt instruction programming and lofting software. It can read .NC1 files
generated by TEKLA software.
C C SPECIFICATIONS
Φ26х20(Q420)
Max. punching(D x T) (mm) Φ26х20(Q235) Φ26х20(Q420) Φ26х20(Q420)
#8 - #16 (channel)
Shearing mode Double blade Double blade Single blade Single blade
Overall dimensions (m) About 32×7×3 About 32×7×3 About 32×7×3 About 32×7×3
Net Weight of machine (Kg) About 16500 About 17000 About 17500 About 17500
PAGE 09/10
www.sunrise-machine.com
B b PRODUCT FEATURE
TBL2532/TBL3635
TBL2532/TBL3635
Spindle anti-lock device have obtained national patent.
CNC
CNCDRILLING
DRILLING&&MARKING
MARKINGLINE
LINEFOR
FORANGLES
ANGLES
Adopt CNC technology, servo motor feeding, with high efficiency, stable workpiece precision.
Key hydraulic, pneumatic and electric parts all famous brands.
Easy programming, adopt instruction programming and lofting software. It can read .NC1 files
generated by TEKLA software.
Software with Chinese/English interface, easy operation, and can display workpiece drawing.
A a APPLICABLE INDUSTRY
All marking and drilling in automatic completeness, all finished angles can be unloaded by
This machine is the automatic special production line used for angle steel drilling & marking, mainly pneumatic turnover device so as to lighten the working strength.
in the field of angle steel tower industry. With self-diagnosis failures function.
Can be installed shearing unit (Max. thickness 20mm) according to requirements . This function is
optional.
C C SPECIFICATIONS
Qty. of character 15 15
Spindle rotation speed (r/min) 120 - 560,Transducer stepless adjustment 120 - 560,Transducer stepless adjustment
PAGE 11/12
www.sunrise-machine.com
B b PRODUCT FEATURE
TADM2532/TADM3635
Adopt CNC technology, servo motor infeeding, with high efficiency, stable working precision.
HIGH SPEED CNC DRILLING & MARKING LINE FOR ANGLES
Key hydraulic, pneumatic and electric parts all famous brands.
Software with Chinese/English interface, easy operation, and can display the drawing of
workpiece.
Loading, marking, drilling and unloading are all performed automatically.
A a APPLICABLE INDUSTRY Easy programming, can manual programming and also can use the program generated by lofting
software.. It can read .NC1 files generated by TEKLA software.
This machine is the automatic special production line used for angle steel drilling & marking, mainly The machine is installed with supporting &straight pressing device.
in the field of angle steel tower and steel structure industry. With avoided shearing functions, so as to process fixed length angles.
With self-diagnosis failures function.
Shearing unit is optional, using double blades cutting.
C C SPECIFICATIONS
Qty. of character 15
PAGE 13/14
www.sunrise-machine.com
B b PRODUCT FEATURE
TPP103/TPPR103(ENHANCED)/ The machine-frame is made by C-type plate welding, with good rigidity and big handling space.
TPP103-4/TPPR103-4(ENHANCED) TPP103/TPPR103 machine have three die-stations (two punching, one marking), TPP103-4/
CNC HYDRAULIC PUNCHING & MARKING MACHINE FOR PLATES TPPR103-4 have four die-stations (three punching, one marking), automatic switching die-
stations. Clamping system can be adapted to different workpiece, with reference block, and
workpiece supported by rolling-ball working table. X & Y axis action controlled by servo motor and
ball-screw driving and PLC, control the position of punching, so as to make the whole machining
A a APPLICABLE INDUSTRY process automatically. Operator input the workpiece program, it can be used repeatedly
Adopt CNC technology, servo motor feeding, with high efficiency, stable workpiece precision.
This machine is the special equipment used for punching and marking of connection plates in the Important functional components adopt modular assembly, easy to repair it.
field of steel tower, bridge, steel structure. Achieve punching and marking on the one plate.
Easy programming, can read CAD drawing and also can use the program generated by lofting
software. It can read TEKLA lofting software files, such as NC1 format.
With self-diagnosis failures function.
X, Y axis are driven by servo motor + ball screw + linear guide, the precision is better.
C C SPECIFICATIONS
Max. punching diameter (mm) Round hole Φ26 Round hole Φ26, Slot hole 22x50
Qty. of character 12 16 12 12
Die-stations 3 4
Overall dimensions L×W×H (m) About 3.2×3×1.9 About 3.4×3.2×1.9 About 3.2×3×1.9 About 3.4×3.2×1.9
Machine weight (Kg) About 5420 About 6500 About 5520 About 6800
PAGE 15/16
www.sunrise-machine.com
B b PRODUCT FEATURE
TPPD103/TPPRD103(ENHANCED) /
The machine-frame is made by C-type plate welding, with good rigidity and big handling space.
TPPD103-4/TPPRD103-4(ENHANCED) Model TPPD103/TPPRD103 machine have four die-stations (two punching, one marking and
CNC HYDRAULIC PUNCHING, DRLLING & MARKING MACHINE FOR PLATES one drilling), TPPD103-4/TPPRD103-4 machine have five die-stations (three punching, one
marking and one drilling), automatic switching die-stations. Clamping system can be adapted to
different workpiece, with the reference block, and workpiece supported by rolling-ball working
table. X & Y axis action controlled by servo motor and ball-screw driving and PLC, control the
position of punching, so as to make the whole machining process automatically. Operator input
A a APPLICABLE INDUSTRY the workpiece program, it can be used repeatedly.
Special CNC machine for punching, drilling and marking of steel plates in the field of steel tower Adopt CNC technology, servo motor feeding, with high efficiency, stable workpiece precision.
industry. It is also used to punch and mark of steel plates of other industries. Important functional components adopt modular assembly, easy to repair it.
Carry out punching, drilling and marking on the one plate.
Easy programming, can read CAD drawing and also can use the program generated by lofting
software. It can ready TEKLA lofting software files, such as NC1 format.
With self-diagnosis failures function.
X, Y axis are driven by servo motor + ball screw + linear guide, the precision is better.
C C SPECIFICATIONS
Max. punching diameter (mm) Round hole Φ26 Round hole Φ26, Slot hole 22x50
5 ~ 25(Q345) 5 ~ 25(Q345)
Plate punching thickness (mm) 5 ~ 25(Q235) 5 ~ 25(Q235)
5 ~ 20(Q420) 5 ~ 20(Q420)
Max. drilling diameter (mm) Φ50
Qty. of character 12 16 12 12
Die-stations 4 5
Overall dimensions L×W×H (m) About 3.2×3×2.6 About 3.4×3.2×2.6 About 3.4×3.2×2.6 About 3.4×3.2×2.6
Machine weight (Kg) About 5800 About 7000 About 5900 About 7300
PAGE 17/18
www.sunrise-machine.com
B b PRODUCT FEATURE
TPP104/TPPR104(ENHANCED)/
The machine-frame is made by C-type plate welding, with good rigidity and big handling
TPP104-4/TPPR104-4(ENHANCED) space. TPP104/TPPR104 machine have three die-stations (two punching, one marking),
CNC HYDRAULIC PUNCHING & MARKING MACHINE FOR PLATES TPP104-4/TPPR104-4 have four die-stations (three punching, one marking), automatic
switching die-stations. Clamping system can be adapted to different workpiece, with the
reference block, and workpiece supported by rolling-ball working table. X & Y axis action
controlled by servo motor and ball-screw driving and PLC, control the position of punching, so
as to make the whole machining process automatically. Operator input the workpiece program,
A a APPLICABLE INDUSTRY it can be used repeatedly.
Adopt CNC technology, servo motor feeding, with high efficiency, stable workpiece precision.
Special CNC machine for punching and marking of steel plates in the field of steel tower industry. It
Important functional components adopt modular assembly, easy to repair it.
is also used to punch and mark of steel plates of other industries.
Carry out punching and marking on the one plate.
Easy programming, can read CAD drawing and also can use the program generated by lofting
software. It can read TEKLA lofting software files, such as NC1 format.
With self-diagnosis failures function.
X, Y axis are driven by servo motor + ball screw + linear guide, the precision is better.
C C SPECIFICATIONS
Max. punching diameter (mm) Round hole Φ26 Round hole Φ26, Slot hole 22x50
5 ~ 25 (Q345) 5 ~ 25 (Q345)
Plate punching thickness (mm) 5 ~ 25 (Q235) 5 ~ 25 (Q235)
5 ~ 20 (Q420) 5 ~ 20 (Q420)
Qty. of character 12 16 12 12
Die-stations 3 4
Overall dimensions L×W×H (m) About 3.2×3×1.9 About 3.4×3.2×1.9 About 3.2×3×1.9 About 3.4×3.2×1.9
Machine weight (Kg) About 5800 About 6900 About 5900 About 7500
PAGE 19/20
www.sunrise-machine.com
B b PRODUCT FEATURE
TPPD104/TPPRD104(ENHANCED) / The machine-frame is made by C-type plate welding, with good rigidity and big handling space.
TPPD104/TPPRD104-4(ENHANCED) Model TPPD104/TPPRD104 machine have four die-stations (two punching, one marking and
CNC HYDRAULIC PUNCHING, DRLLING & MARKING MACHINE FOR PLATES one drilling), TPPD104-4/TPPRD104-4 machine have five die-stations (three punching, one
marking and one drilling), automatic switching die-stations. Clamping system can be adapted to
different workpiece, with the reference block, and workpiece supported by rolling-ball working
table. X & Y axis action controlled by servo motor and ball-screw driving and PLC, control the
A a APPLICABLE INDUSTRY position of punching, so as to make the whole machining process automatically. Operator input
Special CNC machine for punching, drilling and marking of steel plates in the field of steel tower the workpiece program, it can be used repeatedly.
industry. It is also used to punch and mark of steel plates of other industries. Adopt CNC technology, servo motor feeding, with high efficiency, stable workpiece precision.
Important functional components adopt modular assembly, easy to repair it.
Carry out punching, drilling and marking on the one plate.
Easy programming, can read CAD drawing and also can use the program generated by lofting
software. It can read TEKLA lofting software files, such as .NC1 format.
With self-diagnosis failures function.
X, Y axis are driven by servo motor + ball screw + linear guide, the precision is better.
C C SPECIFICATIONS
Max. punching diameter (mm) Round hole Φ26 Round hole Φ26, Slot hole 22x50
5 ~ 25 (Q345) 5 ~ 25 (Q345)
Plate punching thickness (mm) 5 ~ 25 (Q235) 5 ~ 25 (Q235)
5 ~ 20 (Q420) 5 ~ 20 (Q420)
Max. drilling diameter (mm) Φ50
Qty. of character 12 16 12 12
Die-stations 4 5
Machine weight (Kg) About 6000 About 7400 About 6100 About 7700
PAGE 21/22
www.sunrise-machine.com
B b PRODUCT FEATURE
TPL8004
CNC HYDRAULIC PUNCHING, MARKING & SHEARING LINE FOR FLAT BAR Adopt CNC technology,servo motor feeding,with high efficiency, stable workpiece precision.
Key hydraulic,pneumatic and electric parts all imported.
Computer with Chinese/English interface,easy operation, and can display the drawing of
workpiece.
All marking,punching and shearing in automatic completeness.
A a APPLICABLE INDUSTRY Fast marking speed.
Flat end with single-balde cutting; Circular arc end with double-blade cutting;
This machine is the automatic special production line used for flat bars marking, punching, and
With self-diagnosis failures function.
shearing mainly in the field of angle steel tower industry, electric power fittings, structure storage
facilities, and steel structure construction industries etc.
C C SPECIFICATIONS
Model TPL8004
Max.thickness (mm) 12
Qty. of die-station Four (two round hole, one slot hole, one marking)
Qty. of character 12
Flat end with single-blade cutting; Circular arc end with double-blade
Cutting Mode
cutting
PAGE 23/24
www.sunrise-machine.com
B b PRODUCT FEATURE
TPL9004
Adopt CNC technology,servo motor feeding,with high efficiency, stable workpiece precision.
CNC HYDRAULIC PUNCHING, MARKING & SHEARING LINE FOR FLAT BAR AND CHANNEL
Key hydraulic,pneumatic and electric parts all famous brands.
Computer with Chinese/English interface,easy operation, and can display the drawing of
workpiece.
All marking,punching and shearing in automatic completeness.
A a APPLICABLE INDUSTRY Only need to input size of workpiece,diameter of holes and quantity of workpiece when edit
program.
This machine is the automatic special equipment used for flat bar and channel steel marking, Fast marking speed.
punching, and shearing mainly in the field of angle steel tower industry. Flat end with single-blade cutting; Circular arc end with double-blade cutting;
With self-diagnosis failures function.
C C SPECIFICATIONS
Max.thickness (mm) 12
Qty. of characters 12
PAGE 25/26
PLATES / TUBESHEET AND
MACHINERY FOR STEEL
STRUCTURES / BEAMS /
FLANGES
MACHINES FOR STEEL STRUC TURES / BEAMS /
PLATES / TUBESHEET AND FLANGES
钢结构、梁、大板、管板和法兰加工设备
www.sunrise-machine.com
B b PRODUCT FEATURE
TPHD1616/TPHD2016/TPHD3016/TPHD4016 CNC slide way drilling spindle (Z axis) with work piece of stroke is pre-set, realized auto switch.
HIGH SPEED CNC DRILLING MACHINE It can drill not only through-hole, but also blind-hole with high efficiency, simple-structure, low-
cost maintenance, easy operation etc.
There are 12 hydraulic clamps & T slots for fixing workpieces, easy to operate, also save time,
improve production efficiency.
This machine have three CNC axis: gantry moving direction (x-axis);drilling head moving direction
(y-axis); Spindle feeding direction (z axis). Machine equip each axis with linear guide and ball
A a APPLICABLE INDUSTRY
screw which drived by high precision servo motor.
This machine is the automatic special equipment used for drilling, tapping, milling steel plate, flanges,
Machine have scrap cleaner which collect iron scraps and cutting liquid.
tube sheets, mainly in the field of steel structure, boiler, heat-exchanger and so on. This machine
The machine equipped with automatic lubrication system for linear guides and ball screws.
also can drill through hole, blind hole, ladder hole.
Machine adopts SIEMENS CNC system, also equip with computer for drawing and workpiece
program processing, easy to operate.
The configuration of the machine, like ball screws, linear guides, main electrical parts, servo
motors, inverter, etc., all famous brands.
C C SPECIFICATIONS
Thickness of work piece (mm) Hydraulic clamps to 100; T-slot with tooling to 120
Drill head quantity One or with ATC (automatic tooling changer-8 pics)
With function of break point memory (Restart production easily after power off)
Overall size (m) About 4.5x3.9x3.2 About 4.9x3.9x3.2 About 5.5x3.9x3.2 About 6.5x3.9x3.2
Weight (Kg) About 11000 About 12000 About 13000 About 14500
PAGE 27/28
www.sunrise-machine.com
B b PRODUCT FEATURE
Heavy-load linear roller guide pairs are equipped on two sides of the machine bed respectively. The drive
TPHM3016 adopts the German Siemens AC servo motor to drive the synchronous belt and the precision ball screw pair
HIGH SPEED CNC DRILLING MACHINE FOR COOLER HEADER PLATES to synchronize the drive on both sides.
The drilling spindle used Taiwan precision inner cooling spindle, the taper is BT50, it has butterfly spring
automatic broach pulling mechanism. It is very convenient to change the tool by connecting rod with drill bit
The machine body and gantry are weld assembly with good quality of steel plate, which was high
temperature annealed before processing, was annealed again after half finished machining to remove
A a APPLICABLE INDUSTRY
stress, then finished machining so that ensure stable precision.
Mainly used for drilling, tapping and light milling of square box parts in petrochemical air coolers. The support plates is installed on the work surface, and a T-shaped groove is opened on the surface, and
Carbide drills can be used for internal cooling high-speed drilling, high-speed twist drills also can be the groove width is 28 mm, which is convenient for clamping the workpiece.
used for external cold drilling. It adopts SIEMENS CNC system with 4 CNC axis, equipped with RS232 interface and LCD screen. Drilling
coordinates can realize CAD/CAM direct conversion, and it has the function of hole pre-drilling before real
Both sides of the worktable are equipped with chip conveyors for automatic chip removal. The machine is
water based cooling and with a coolant supply, recovery, and circulation filtration system.
The solenoid valves of hydraulic system are all made in Italy ATOS, the quality is stable.
The machine's x, y-axis guides and lead screws are equipped with protective covers. The X-axis is
equipped with a steel shield and the y-axis is equipped with an organ shield.
In order to ensure the reliability of the machine tool, the key parts are imported quality products.
C C SPECIFICATIONS
Parameter Name Item Parameter Value (X axis) Max. stroke (mm) 3000
Gantry longitudinal
Servo motor power of X
move 4.3
Max. size L X W (mm) 3000X1600 axis (kW)
Work table Width of T slot (mm) 28/500 Stroke of Z axis (mm) 500
(Z axis)
Vertical slider feeding Servo motor power of Z
Quantity 1 3.1
axis (kW)
Main spindle taper hole BT50 Positioning accuracy X/Y axis (mm) ≤ 0.1/ Full length
Repositioning
Max drill diameter (mm) φ50 X/Y axis (mm) ≤ 0.05
accuracy
PAGE 31/32
www.sunrise-machine.com
B b PRODUCT FEATURE
TSWZ400-9/TSWZ700-9 Equipped with three power heads, every power head has three drilling spindles which can put
CNC BEAMS DRILLING MACHINE three different tools. It can satisfy three kinds of different hole diameters on the same processing
surface, without frequent manual tool changes, and improve working efficiency. All these 3 power
heads can work simultaneously on the web and flanges of the beam.Adopt self-controlled stroke
drilling head.
No need to set thickness of work piece and length of drilling bit, automatically finish the transfer of
rapid feeding and work feeding, and with high efficiency.
A a APPLICABLE INDUSTRY
PLC systems, LCD screen display, programming Microsoft based on WINDOWS platform, fast
Used for the drilling processing of H-beam, channel steel of steel structure, bridge, three and convenient programming, and visual previewing.
dimensional garage and petrol platform. Each drilling head, equipped with professional main shaft motor from famous products abroad.
Main machine, hydraulic pressure, electric components are famous products domestic and
abroad.
Advanced program, can arbitrary implementation of skip step processing.
C C SPECIFICATIONS
No. of spindle Three spindle on each of three sides (top,left,right) Total: 9 spindles
PAGE 35/36
www.sunrise-machine.com
B b PRODUCT FEATURE
TSWZ1000/TSWZ1250/TSWZ1400 Equipped with three drilling units, three drilling units can drill holes simultaneously and adopt self-controlled
CNC BEAMS DRILLING MACHINE stroke drilling head.
No need to set Thickness of work piece and length of drill bits, it will do fact-feeding or feeding automatically
Frame made of sturdy electro-welded and normalized Plates and Square Beams. The structure with roller
guides on which the sliders supporting the three spindles guarantees the total moving stability, and ensures
This machine is special equipment used for the drilling processing of H beams, channel steel of steel Equipped with automatic lubrication system and air conditioner for electric cabinet.
structure, bridge, three dimensional garage and petrol platform industries. Equipped with automatic feeding systems, which will clamp and feed material into machine automatically.
PLC systems, programming based on WINDOWS, fast and convenient programming, and visual previewing.
The key mechanical, hydraulic and electric parts are all famous brands.
C C SPECIFICATIONS
PAGE 37/38
www.sunrise-machine.com
B b PRODUCT FEATURE
TBD SERIES
There are 3 spindle unit on the up, left & right side, which is for web and flange drilling.
GANTRY MOVABLE CNC BEAMS DRILLING LINE
There are 8 CNC axis, which equip with high precision servo motor.
Software can process workpiece drawing directly which edited by Auto CAD.
Scrap cleaner can collect all iron scraps and cutting liquid which is recycling.
Machine equips with photoelectric measure sensor, can detect beams and measure the length
automatically.
A a APPLICABLE INDUSTRY
C C SPECIFICATIONS
This machine is special equipment used for the drilling processing of large H beams, channel steel of
steel structure, bridge, three dimensional garage and other industries. Model TBD2010 TBD2515 TBD3030
Type CNC slipway type CNC feeding slider CNC feeding slider
Quantity 3 3 3
Max. drilling dia. (mm) φ12 ~ φ50 φ12 ~ φ50 φ12 ~ φ50
Drilling Unit Axial direction stroke (1 and 3 axis) (mm) 780 800 800
Vertical drilling unit Max. stroke of V axis (mm) 1980 2480 3000
Left drilling unit Max. stroke of U axis (mm) 980 1480 3000
Right drilling unit Max. stroke of W axis (mm) 980 1480 3000
Control Mode Spain Fagor +PLC Spain Fagor +PLC Spain Fagor +PLC
PAGE 41/42
www.sunrise-machine.com
B b PRODUCT FEATURE
TBS750/TBS1000/TBS1250
Double column design equipped with strong machine body, with fine function of absorbing vibration
BAND SAWING MACHINE during high speed sawing.
Can rotate itself and no need to rotate for longer work piece when beveling for 0~45° , can keep the
continuity of production.
Saw blade driving with greater motor power and good transmission. Used for the specialized
processing of various section steel of steel structure industry.
Saw blade hydraulic automatic tensioning device, keep saw blade stable during high speed rotation
A a APPLICABLE INDUSTRY and can extend life of saw blade.
Equipped with clamping arm and guide saw blade to prevent saw blade deflection, to overcome the
Used for the sawing of H beams, box beams, channel steel, angle steel and round steel of steel phenomenon of high-speed sawing clip saw.
structure, bridge, three dimensional garage and petrol platform industries. The saw blade produces narrow seam and high end precision, which greatly reduces material
consumption.
Laser alignment function and advanced and retreated structure slightly adjusted with hand, convenient
for cutting accurately.
Automatic coolant compatible with blade could make blade lubricant and reduce the temperature of
blade.
PCL control, sawing linear velocity can be adjusted by transducer motor and sawing feeding speed
also can be adjusted by hydraulic stepless adjustment. This greatly promotes production efficiency.
Key machine, hydraulic pressure and electric components are chosen famous products domestic and
abroad.
C C SPECIFICATIONS
Overall dimensions (LxWxH) (m) About 3.5×2.5×2.6 About 4×2.3×2.6 About 4.225×2.3×2.725
PAGE 43/44
www.sunrise-machine.com
B b PRODUCT FEATURE
TRDL SERIES
The machine bed is separated from the worktable, and the moving column and drilling power head
HIGH SPEED CNC DRILLING MACHINE FOR RAILS
are installed on the bed. A powerful electromagnetic suction disk is installed on the machine’s
worktable, which is used to tighten the workpieces. A manual oblique wedge type auxiliary
supporting device is installed on the worktable away from the output roller to one end.
The drill bit power box adopts the pillow structure, adopts the large size roller guide, it is installed
on the large section size column, improves the rigidity of the machine, moves up and down
A a APPLICABLE INDUSTRY through the AC servo motor to drive the ball screw pair, the upper part is fitted with a balanced
cylinder.
The machine is mainly used to process the connecting holes of the basic rail in the turnout rail and
Drilling power box using imported high-speed precision spindle, with spindle servo motor.
at the waist of AT rail. Drilling process using carbide drill bit, semi-automatic production can be
Automatic tool-changing function, equipped with four tool positions of the linear tool magazine,
realized, reduce labor intensity, greatly improve labor productivity.
improve processing efficiency.
Installed a pressing cylinder on the moving column, when processing rail, press the workpieces
and improve the clamping stiffness.
The motion of the main machine on the machine bed and the movement of the power head on the
column have a single magnetic ruler detection system, which can ensure the positioning accuracy
of the coordinate movement.
The drilling tools adopted indexable carbide U drill, the spindle adopted hollow ventilation fog
cooling.
The loading and unloading system is used in the loading and unloading process of ordinary rail,
which can realize semi-automatic production, reduce the labor intensity of workers, and greatly
improve the labor productivity.
C C SPECIFICATIONS
Model TRDL25
Spindle Qty. 1 or 2
Number of tools per spindle / number of tools in the tool magazine In-line type, 5 pics tools
Motor power(kW) 22
PAGE 49/50
www.sunrise-machine.com
B b PRODUCT FEATURE
TPLD2020/TPLD2525/TPLD3030
Servo slide drilling unit heads, with the function of drilling holes, reaming, chamfering, milling of groove, can
CNC DRIILLING MACHINE FOR PLATES AND TUBE SHEETS work together, or work separately.
Automatically find pot to dill holes in X,Y axis. Spindle rotation speed and feed velocity are stepless
adjustment.
T-groove is set on lathe bed, using pressure plate to clamp workpiece.
Hand wheel, thimble and edge finder can be used to find the center of the workpiece.
The CNC system adopts the Spanish Fagor or the German Siemens system and is equipped with USB
A a APPLICABLE INDUSTRY interface and LCD display screen . The automatic programming provided by the invention not only has the
functions of automatically generating a processing program, but also has the function of drilling hole position
Used for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and preview and etc.
wind power flange industries, also for joint plates in building, bridge, iron tower, etc. Programming software based on WINDOWS with CAD, fast and convenient programming, and visual
previewing.
Automatic chip removal, coolant circulation cooling.
Key machinery, hydraulic pressure, electric components all famous brands.
First choice equipment of tube plate drilling in heat exchange, chemical & mechanical industry.
C C SPECIFICATIONS
Quantity of chip-conveyor 2
PAGE 53/54
www.sunrise-machine.com
B b PRODUCT FEATURE
TPLD4040/TPLD5050/TPLD6040
Servo slide drilling unit heads, with the function of drilling holes, reaming, chamfering, milling of groove, can
CNC DRIILLING MACHINE FOR PLATES AND TUBE SHEETS work together, or work separately.
Automatically find pot to dill holes in X,Y axis. Spindle rotation speed and feed velocity are stepless
adjustment.
T-groove is set on lathe bed, using pressure plate to clamp workpiece.
Hand wheel, thimble and edge finder can be used to find the center of the workpiece.
The CNC system adopts the Spanish Fagor or the German Siemens system and is equipped with USB
A a APPLICABLE INDUSTRY interface and LCD display screen . The automatic programming provided by the invention not only has the
functions of automatically generating a processing program, but also has the function of drilling hole position
Used for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and preview and etc.
Programming software based on WINDOWS with CAD, fast and convenient programming, and visual
wind power flange industries, also for joint plates in building, bridge, iron tower, etc.
previewing.
Automatic chip removal, coolant circulation cooling.
Key machinery, hydraulic pressure, electric components all famous brands.
First choice equipment of tube plate drilling in heat exchange, chemical & mechanical industry.
C C SPECIFICATIONS
PAGE 55/56
www.sunrise-machine.com
B b PRODUCT FEATURE
TPHD2020/TPHD2525/TPHD3030/TPHD3020/TPHD4030 Servo slide drilling unit heads, with the function of drilling holes, reaming, chamfering, milling of
TWO-SPINDLE GANTRY MOVABLE HIGH SPEED CNC DRILLING MACHINE groove, can work together, or work separately.
FOR PLATES AND TUBE SHEETS Heavy-load linear roller guide pairs are equipped on two sides of the machine bed respectively.
The longitudinal movement of the gantry’s two sides is driven synchronously via AC servo motor
and precise ball screw pair of big pitch.
A a APPLICABLE INDUSTRY T-groove is set on lathe bed, using pressure plate to clamp workpiece.
Hand wheel, thimble and edge finder can be used to find the center of the workpiece.
Mainly used for drilling tube plate, clapboard, flange and large plate in petrochemical, boiler, wind
The slides on the cross beam are equipped with vertical CNC feeding ram-type drilling spindle
power, flange industries and also for connection plates in building, bridge, heat exchange, iron tower
BT40 or BT50, which adopts special conversion motor with heavy load for spindle.
industries.
The machine is equipped with hydraulic system to finish the hydraulic balance of vertical ram and
hydraulic cutter loosing of spindle.
It adopts Spanish FAGOR or German SIEMENS CNC system, equipped with USB interface and
LCD screen.
It is equipped with chain-plate type automatic chip-conveyor and chip collection trolley.
The cooling system is equipped with paper filer, high-pressure inner cooling pump and low-
pressure outer cooling pump, which are used for inner cooling or outer cooling of cutter.
C C SPECIFICATIONS
(Y axis) Power head transverse move Max stroke (mm) 2000 2500 3000 2000 2000
Weight (Kg) About 30000 About 35000 About 40000 About 35000 About 40000
PAGE 57/58
www.sunrise-machine.com
B b PRODUCT FEATURE
TPM2020/TPM2525/TPM3030 The servo sliding drilling power head has the function of drilling, reaming, chamfering and milling
HIGH SPEED CNC DRILLING MACHINE FOR PLATES AND TUBE SHEETS groove. It can work together or independently.
The machine consists of lathe bed, Longitudinal slide table, gantry, Transverse slide, vertical slide
pillow drilling power box, worktable, chips discharge system, hydraulic system, cooling system,
centralized lubricating system, electric System, pneumatic system etc.
The machine body is equipped with high precision linear guide, moving mobility. AC servo motor
is used to drive synchronous belt and precision ball screw pairs. Ensure high accuracy.
A a APPLICABLE INDUSTRY
The machine body and gantry are weld assembly with good quality of steel plate, which was high
Mainly used for drilling tube plate, clapboard, flange and large plate in petrochemical, boiler, wind temperature annealed before processing, was annealed again after half finished machining to
power, flange industries and also for connection plates in building, bridge, iron tower industries. remove stress, then finished machining so that ensure stable precision.
There are several horizontal T slot on the worktable for clamping fixture and plate.
Machine adopts Spain FAGOR CNC systems or Germany's Siemens, equipped with USB
interface and LCD liquid crystal display, drilling coordinates of CAD/CAM direct conversion can be
realized.
It is equipped with automatic chip cleaner and scrap carriage, cooling system is equipped with
high pressure internal cooling pump and low pressure external cooling pump, which can be used
for internal cooling or external cooling.
C C SPECIFICATIONS
Max. size of workpiece Max. hole distance L×W (mm) 2000×2000 2500×2500 3000×3000
(mm) Max. Thickness (mm) 250
Quantity One or more (By customer’s request)
Spindle taper BT50
Drilling spindle Max. diameter of drilling (mm) Φ40 (Carbide drill) Φ50 (High speed steel twist drill)
Rotation speed (r/min) 30~3000
Motor power of spindles (kW) 22/33
PAGE 59/60
www.sunrise-machine.com
The machine consists of lathe bed, Longitudinal slide table, gantry, Transverse slide, vertical slide
TPM4040/TPM5050/TPM6040 pillow drilling power box, worktable, chips discharge system, hydraulic system, cooling system,
centralized lubricating system, electric System, pneumatic system etc.
CNC HIGH SPEED DRILLING MACHINE FOR PLATES AND TUBE SHEETS The machine body is equipped with high precision linear guide, moving mobility. AC servo motor
is used to drive synchronous belt and precision ball screw pairs. Ensure high accuracy.
The machine body and gantry are weld assembly with good quality of steel plate, which was high
temperature annealed before processing, was annealed again after half finished machining to
remove stress, then finished machining so that ensure stable precision.
A a APPLICABLE INDUSTRY
There are several horizontal T slot on the worktable for clamping fixture and plate.
Machine adopts Spain FAGOR CNC systems or Germany's Siemens, equipped with USB
Used for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and
interface and LCD liquid crystal display, drilling coordinates of CAD/CAM direct conversion can be
wind power flange industries, also for joint plates in building, bridge, iron tower, etc.
realized.
It is equipped with automatic chip cleaner and scrap carriage, cooling system is equipped with
high pressure internal cooling pump and low pressure external cooling pump, which can be used
for internal cooling or external cooling.
C C SPECIFICATIONS
PAGE 61/62
www.sunrise-machine.com
B b PRODUCT FEATURE
TPL104/TPL108
The machine-frame is made by C-type plate welding, with good rigidity and big handling space.
MULTI -STATIONS CNC PUNCHING MACHINE FOR PLATES The machine sets four die-stations, automatic switching die-stations. Clamping system can
adapt to different workpiece, with reference, and workpiece supported by rolling-ball working
table. Axis X action controlled by servo motor and rack driving, Axis Y action controlled by servo
motor and ball-screw driving, and double-axis CNC system controls the position of punching, so
as to make the whole machining process automatically; operator may input the sizes of workpiece
A a APPLICABLE INDUSTRY to computer for repeated calling program in the future.
The machine is the automatic special production line used for steel plates punching, mainly in the Adopt CNC technology, servo motor infeeding, with high efficiency, stable workpiece precision.
field of automobile, steel structure construction industries etc. Important functional components adopt modular assembly, easy to repair it.
Carry out different kinds of punching holes on the one plate.
Key hydraulic,pneumatic and electric parts all imported.
With self-diagnosis failures function.
Hydraulic station -- water cooling.
Lighten the working strength.
C C SPECIFICATIONS
PAGE 63/64
www.sunrise-machine.com
TQC200/TQC250/TQC360 TGQ200/TGQ250/TGQ360
ANGLE BACK MILLING MACHINE ANGLE ROOT MILLING MACHINE
The machine used for angle back milling, mainly in the field of angle steel tower industry, electric The machine used for milling angle root mainly in the field of angle steel tower industry, electric
power fittings, structure storage facilities, and steel structure construction industries etc. power fittings, structure storage facilities, and steel structure construction industries etc.
C C SPECIFICATIONS
C C SPECIFICATIONS
Angle processing size (mm) L63*6 ~ L200*20 L63*6 ~ L250*32 L63*6 ~ L360*35
Feeding speed (mm/min) 100 ~ 500 100 ~ 500 100 ~ 500
Processing length (mm) 380 ~∞ 380 ~∞ 380 ~∞
Model TQC200 TQC250 TQC360
Angle processing size (mm) L63*6 ~ L200*20 L63*6 ~ L250*32 L63*6 ~ L360*35 Motor power (kW) 4.2 5.8 5.8
Feeding speed (mm/min) 100 ~ 500 100 ~ 500 100 ~ 500 Qty. of feeding motor 1 2 2
Processing length (mm) 380 ~∞ 380 ~∞ 380 ~∞ Rotation of spindle (r/min) 288 288 288
Total power (kW) 7.5 9.5 18.5
Qty. of axis 1 2 2
Qty. of feeding motor 2 2 2
Rotation of spindle (r/min) 288 288 239 Diameter of cutting plate (mm) 100 100 100
Qty. of axis 2 2 3 Size of cutting blades 16*16*82° 16*16*82° 16*16*82°
Diameter of cutting plate (mm) 100 100 160/63/160
Qty. of cutting blades 8 16 16
Size of cutting blades 16*16/R20、R28 16*16/R20、R40 16*16/R28、R40
Qty. of cutting blades 16/16 16/16 024/3/24 Pressure of cylinder (KN) 60 60 60
Pressure of cylinder(KN) 60 60 60 Capacity of oil tank (L) 40 40 40
Capacity of oil tank (L) 130 130 130 Weight (T) About 2 About 2.5 About 3
Weight (T) About 2.5 About 3.5 About 4.5
Overall size (m) About 2.2x1.6x1.7 About 2.4x2x1.8 About 3.5x2.2x1.8 Overall size (m) 1.8x1.4x2 2.2x1.4x2 2.5x2.5x2.1
PAGE 67/68
www.sunrise-machine.com
TX1D1H TX-XF4/TX-XF8
CNC PLASMA CUTTING MACHINE FOR PLATES CNC PLASMA CUTTING MACHINE FOR PIPES
C C SPECIFICATIONS C C SPECIFICATIONS
No. Items Parameters
1 Effective cutting width and length By customer’s request Model TX-XF4/TX-XF8
2 Cutting method Plasma cutting and flame cutting
Hypertherm 125A Round pipe from 100mm-200mm
3 High precision Plasma source /thickness
or by customer’s request Processing pipe diameter Square pipe from 100mm -200mm
4 Cutting torch lifting distance 200mm (By customer’s request)
5 Machine speed 0-9000mm/min
6 Speed tolerance ≤ ±5%
Pipe length 12m (By customer’s request)
7 Flame torch One groups or by customer’s request
8 Plasma torch One groups or by customer’s request
9 Arc voltage height controller HYD One Cutting method One plasma and one flame cutting
10 Automatic ignition device No need
11 Drive mode Bilateral drive Cutting thickness Plasma hypertherm 125A, max. Cut 25mm , flame cut max. To 60mm
12 System console direction According to user requirements
PAGE 69/70
www.sunrise-machine.com
CUSTOMER VISIT
SUNRISE
PAGE 73/74