EY\aainay Wn
TILE ADHESIVE Heavy-Duty
PE
Product Identifier: ABC Tle Adnesive Heavy-Duty
Product Use Heavy Duty Tle Adhesive
Company Information: Aligemsine Bau-Chemie Phil, Inc
AO/F Asian Star Building 2404 Asean Drive
Filinvest City, Alabang,
Muntinlupa City 1781 Philippines
Tel. No, (632) 8842-6891
Pe
None.
Ce
Io
MN
Ingredients w/ CAS (Chemical Abstract Service) number
Portland Cement CAS #65997-15-1
Sand
Limestone CAS#1317-65-3
Methyl Cellulose (small amount) CAS # 9032-42-2
Cellulose fber(small amount) CAS # 9004-34-68
Se
General Advise: Remove contaminated clothing,
Winhaled Patient should remain calm. Draw in fresh a. Summon
‘medical help.
Skin Contact: Wash with soap and water.
Contactwith Eyes: Wash affected eyes for at least 15 mins. under
running water with eyelids held open. Consult an
eye specialist
Ingestion _: Rinse mouth immediately and drink plenty of water.
Consult a physician.
Eee
“ions of flammability
& Method of
Determination Non-combustble and Non-explosive
Extinguishing Media Not applicable
Special Firefighting Procedure: Not applicable
ores
Personal Precaution
Not applicable
Avoid dust formation. Do not breathe
dust.
Environmental Precaution: Cover any spilled material in accordance
with the regulations to prevent dispersal
by wind, The material can be returned to
container for later use.
Peso
Handling: Avoid dust formation
Storage : Should be stored in a cool place and protected against
moisture,
Ee
Respiratory Equipment: During dust-raising work, use respiratory
equipment with particle fer, type P2.
Wear protective gloves.
Risk of splashes: Wear goggles
Wear special protective clothing. Hood or
helmet shall be used in connection with
splashing work
Remove contaminated clothing and wash
the skin thoroughly with soap and water
after work,
Hand Protection
Eye Protection
Skin Protection
Hygiene Measures
INNOVATIVE BUILDING SOLUTIONS
PIS
Physical State
Powder
(Odour and appearance | No odor; Gray or white powder
12
Not applicable
Specific Gravity
‘Vapor Pressure at 23°C
Boiling Point Not applicable
Slight (3% Maximum)
SL
Solubility in Water
Stability Product is stable. Keep dry until used
Incompatibility : None
Hazardous
Decomposition
Products None
Hazardous
Polymerization : Will not occur
TOXICOLOGICAL PROPERTIES:
No toxicological studies have been made on this product.
Ee
Mobility: The productis not volatile but may spread by dust -
raising handling
Degradability: Non-biodegradable.
Ecotoxieity : Non-hazardous to environment.
PE
Dispose of waste and residues according to agreement with local
authorities. Dispose to licensed waste disposal site in accordance
with the local waste Disposal Authority, Note that a fully cured
‘material is not considered as hazardous waste.
NEN
‘Ths product is not covered by the intermational regulation on the
transport of dangerous goods.
EEC
None.
Cae
‘The user must be instructed in the proper work procedure and be
familiar with the contents of these instructions. The information in this
data sheet represents our currant data and is reliable provided that
the product is used under the prescribed condition and in accordance
with the application specified on the packaging andlor in the technical
guidance iterature, Any other use of the product which involves using
the product in combination with any other product or any other
process is the responsibilly of the user.