SAFETY DATA SHEET
TILE ADHESIVE Original
PE
Product Identifier: ABC Tile Adnesive Original
Product Use Tile Adhesive
Company Information: Allgemeine Bau-Chemie Phil, Inc.
ADIF Asian Star Building 2404 Asoan Drive
Filinvest City, Alabang,
Muntinlupa City 1781 Philippines
Tel. No, (632) 8842-6891
Pe
None.
Ce
Io
MN
Ingredients w/ CAS (Chemical Abstract Service) number
Portland Cement CAS #65997-15-1
Sand
Limestone CAS #1317-65-3
Methyl Cellulose (small amount) CAS #9032-42-2
Crystalline silica in fine dust (small amount)CAS # 14808-60-7
Se
General Advise: Remove contaminated clothing,
inhaled: Patient should remain calm. Draw in fresh ai.
‘Summon medical help,
SkinGontact : Wash with soap and water.
Contact with Eyes: Wash affected eyes for at least 15 mins. under
running water with eyelids held open. Consult an eye:
specialist
Ingestion Rinse mouth immediately and drink plenty of water.
Consultaphysician
Eee
ty :Notapplicable
'& Method of
Determination Non-combustble and Nor-explsive
Extinguishing Media Notapplcable
Special Firefighting Procedure: Not applicable
ores
Personal Precaution _: Avoid dust formation. Do not breathe
dust.
Environmental Precaution: Cover any spilled material in accordance
with the regulations to prevent dispersal
by wind, The material can be returned to
container for later use.
Peso
Handling: Avoid dust formation
Storage Should be stored in a cool place and protected against
moisture,
Ee
Respiratory Equipment: During dust-raising work, use respiratory
equipment with particle fer, type P2,
Wear protective gloves.
Risk of splashes: Wear goggles
Wear special protective clothing. Hood or
helmet shall be used in connection with
splashing work
Remove contaminated clothing and wash
the skin thoroughly with soap and water
alter work,
Hand Protection
Eye Protection
Skin Protection
Hygiene Measures
INNOVATIVE BUILDING SOLUTIONS
PIS
Physical State
Odour and appearance
Powder
No odor; Gray or white powder
12
Not applicable
Specific Gravity
‘Vapor Pressure at 23°C
Boiling Point
Solubility in Water
SL
Not applicable
Slight (39% Maximum)
Stability Product is stable. Keep dry until used,
Incompatibility
Hazardous: None
Decomposition
Products: None
Hazardous
Polymerization: Will not occur
TOXICOLOGICAL PROPERTIES:
No toxicological studies have been made on this product.
Ee
Mobility _: The product is not volatile but may spread by dust -
raising handling
Degradability: Non-biodegradable.
Ecotoxieity : Non-hazardous to environment.
PE
Dispose of waste and residues according to agreement with local
authorities. Dispose to licensed waste disposal site in accordance
with the local waste Disposal Authority, Note that a fully cured
‘material is not considered as hazardous waste.
NEN
‘Ths product is not covered by the intermational regulation on the
transport of dangerous goods.
EEC
None.
Cae
‘The user must be instructed in the proper work procedure and be
familiar with the contents of these instructions. The information in this
data sheet represents our currant data and is reliable provided that
the product is used under the prescribed condition and in accordance
with the application specified on the packaging andlor in the technical
guidance iterature, Any other use of the product which involves using
the product in combination with any other product or any other
process is the responsibilly of the user.