Professional Documents
Culture Documents
MAXSHIELD-PRIMER
MAXSHIELD-PRIMER
MAXSHIELD PRIMER
Epoxy Resin Based Primer for Concrete Surfaces
®
MAXSHIELD PRIMER is a solvent free two Mixing
component epoxy based primer with good penetrating Add the entire contents of the hardener tin to the base
properties for concrete surfaces. and mix thoroughly for 3 mins until homogenous using a
slow speed drill (400 to 500 rpm) fitted with a suitable
Uses
mixing paddle.
®
MAXSHIELD PRIMER is suitable for priming concrete
surfaces prior to the application of PU based Application
waterproofing range. Once mixed the primer should be applied immediately in
a thin continuous film to the clean prepared surface.
Benefits Apply the primer into the surface using a stiff brush or
roller. Excess application and puddling should be
Seals all the micro pours on the concrete surface. ®
avoided. On porous surfaces MAXSHIELD PRIMER
Improves the adhesion of Poly urethane based will be absorbed very quickly leaving characteristic light
water proofing with the substrate. coloured dry patches. It is recommended that a second
priming coat be applied to these dry areas. This not only
Technical support helps to ensure good adhesion but also prevents air
Thermax provides a countrywide technical advisory release from the porous substrate which may cause
service supported by a team of specialists in the field. bubbles in the final water proofing coating.
Properties
Limitations
Pot life @ 27°C 30 min Recommended application temperature range is 10°C
to 40°C. Thermax shall be consulted where application
Mixed Density @ 25°C 1.09-1.14 gm/cc or service temperature is outside this range.
Adhesive Bond Strength with 2
>2 N/mm
concrete (ASTMD 4541) Health & Safety instructions
®
MAXSHIELD PRIMER should not come into contact
Instructions for use with skin and eyes or be swallowed.
Storage
Ahmedabad
®
MAXSHIELD PRIMER has a shelf life of 12 months when stored in unopened
Tel: +91-79-26575408 • Fax: +91-79-65577270
containers under normal warehouse conditions.
Bengaluru
Packing
Tel: +91-80-22371721 • Fax: +91-80-22371726
®
MAXSHIELD PRIMER is available in 1 and 4 ltr packs.
Coverage Chennai
Delhi
Tel: +91-11- 46087200 • Fax: +91-11- 26145311
Hyderabad
Tel: +91-40-23253700 • Fax: +91-40-23253799
Kolkata
Tel: +91-33-66070800 • Fax: +91-33-66070999
Mumbai
Tel: +91-22-67542222 • Fax: +91-22-22040859
Thermax World-wide
UK, USA, UAE, Germany, Belgium, Denmark,
Russia, Saudi Arabia, Thailand, Malaysia,
Bangladesh, Sri Lanka, China, Philippines,
Peru, Chile, Kenya, Nigeria, Brazil, Indonesia
Website: www.thermaxglobal.com
Chemicals
Absorption Cooling
Disclaimer: The information contained in this document is true and accurate to the best of our knowledge and is based on our
Power
experience & test results. It is always the Company's endeavor to give true and accurate information however as it does not have any
direct and/or continuing control on the use of the Products , the Company cannot accept any liability , direct or indirect as a consequence
of the use of Products. In the event of any doubt upon any critical parameter it is advisable to seek clarification from our technical Water & Waste Solutions
representative.
We reserve the right to amend any product details without notice. Copyright© Thermax Limited Edition: (TCC/TDS/1020)
Solar