Professional Documents
Culture Documents
DynaBolt_Plus_Zn_M12-05_07_2024
DynaBolt_Plus_Zn_M12-05_07_2024
DynaBolt_Plus_Zn_M12-05_07_2024
Date : 05/07/2024
Page : 1/5
CALCULATION SHEET FOR RAMSET ANCHORS
Company : Phone number :
Carried out by : Mail address :
Company : Project name :
Contact name : Location :
Phone number : Fastening point :
Mail address :
Comment :
Recommended anchors
DynaBolt Plus Zn 12x75 Technical data sheet
Base material
Type of masonry Three hold brick
Strength 30 N/mm²
Length 230 mm
Width 110 mm
Height 76 mm
Performances issued from Job site test
Conditions
Service temperature 24 °C
Anchor plate
Thickness of part to be fixed : 7 mm
Clearance diameter : 15 mm
Profile :
Profile position : Ex = 0 mm ; Ey = 0 mm
Design Actions :
Action [kN] Dead Load
Combination
Static 0 0 15 0 0 0
1
Ref : 05/07/2024 - 15:44:00 / Version
Date : 05/07/2024
Page : 2/5
Geometry :
Calculation Hypothesis :
- The anchoring plate is assumed to be sufficient to resist deformation imposed by the load actions.
- Connection between profile and base plate has not been checked
- RAMSET can only be held responsible if the calculation examples exactly reflect the application and if the
installation is carried out according to the instruction given in the RAMSET specifications. The calculation is
correct for RAMSET anchors only. The
contractor or specifier should make sure that the base material is able to support the loads especially in the case
of a group of anchors. RAMSET cannot be held responsible if this software package is modified without its
written approval.
Ref : 05/07/2024 - 15:44:00 / Version
Date : 05/07/2024
Page : 3/5
Loads on anchors
h
N Ed [kN]
0
h
V Ed [kN]
3.75
Utilization
INSTALLATION DATA
DynaBolt Plus Zn 12x75
Effective embedment : 40 mm
Hole diameter in the base material : 12 mm
Hole depth in the base material : 45 mm
Installation torque : 15.00 Nm
Base plate thickness : 7 mm
Clearance diameter : 15 mm
INSTALLATION Method