Professional Documents
Culture Documents
P1250-P1375E.
P1250-P1375E.
P1250-P1375E.
Output Ratings
Generating Set Model P1250 P1375E
Prime* Standby*
380-415V, 50 Hz 1250 kVA 1375 kVA
1000 kW 1100 kW
Technical Data
Engine Make & Model Perkins 4012TWG2
Alternator Model LL8124L
Base Frame Type Heavy Duty Fabricated Steel
2
P1250/P1375E
Reactances:
Per Unit
Winding Pitch Code: 2/3-(NO 6S) Total Harmonic Content LL/LN <3.5%
Suppression is in line with British Standard
Wires: 6 Radio Interference BSEN50081 & BSEN50082
3
P1250/P1375E
Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM
Definitions
Standby Rating Prime Rating Standard Reference Conditions
These ratings are applicable for supplying These ratings are applicable for supplying Note: Standard reference conditions 27˚C
continuous electrical power (at variable load) continuous electrical power (at variable load) (80˚F) Air Inlet Temp, 152.4m (500ft) A.S.L.
in the event of a utility power failure. No in lieu of commercially purchased power. This 60% relative humidity. All engine
overload is permitted on these ratings. The model can supply 10% overload power for performance data based on the above
alternator on this model is peak continuous 1 hour in 12 hours. mentioned maximum continuous ratings. Fuel
rated (as defined in ISO8528-3). consumption data at full load with diesel fuel
with specific gravity of 0.85 and conforming to
BS2869: 1998, Class A2.
L W
General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals, circuit wiring diagrams, and BS5000, ISO 8528, warranty. Extended warranty terms available.
commissioning/fault finding instruction ISO 3406, IEC 60034, VDE 0530, NEMA For details on warranty cover please contact
leaflets. MG-1.22. your local dealer
In line with our policy of continuous product development, we reserve the right to change specification without notice.