‘0610712024, 15:20
Thermodynamics Interview Questions
Here are the top 50 commonly asked questions in Thermodynamics interviews. Whether you're
just starting your preparation or need a quick refresher, these questions and answers will help you
tackle your interview with confidence.
Basic Thermodynamics Interview Questions with Answers
1. What is a thermodynamic boundary?
A boundary that separates the system from the surrounding is called as thermodynamic boundary.
It can be fixed or moveable.
2. What is work in thermodynamics?
Work is said to be done by the system if the sole effect on the things external to the system can be
reduced to lifting of weight.
3. What is a heat engine in thermodynamics?
Heat engine is a cyclically operating thermodynamic device that converts the supplied heat energy
into useful work.
4, What is isochoric process in thermodynamics?
The process in which volume of the system remains constant is called as isochoric process
5. What is isobaric process in thermodynamics?
The process in which pressure of the system remains constant is called as isochoric process.
6. What is adiabatic process in thermodynamics?
The reversible process in which there is no energy transfer across the boundary of the system is
called as adiabatic process.
nips:awwsanfoundry.comithermodynamics-interview-questions! sn0‘0610712024, 16:20 ‘50+ Thermodynamics Interview Questions and Answers - Sanfounery
7. What is a thermodynamic cycle?
A process or combination of processes undergone by a system, as a result of which the system is
restored to its initial state is called a cycle.
8, What is an ideal gas in thermodynamics?
A gas that obeys the ideal gas equation at all pressure, temperature and volume is called as ideal
gas.
9. What is a refrigerator in thermodynamics?
A refrigerator is a cyclically operating device which absorbs energy as heat from a low temperature
body and rejects energy to high temperature body when work is performed on the device.
10. What is temperature in thermodynamics?
Temperature is defined as the property by virtue of the difference of that property heat flows.
Temperature is also defined as the average kinetic energy of molecules.
ntpsmawwsanfoundry.comMhermodynamics-interview-questions! 210os107r2024, 1520 50+ Thermodynamics Interview Questions and Answers -Sanfounsty
The specific heat is defined as the amount of heat required to increase the temperature of 1kg of
substance through 10C.
12. What is free expansion in thermodynamics?
Expansion against the evacuated chamber is known as free expansion. In free expansion the work
done is zero, because there is no resistance offered from the surrounding.
13, What is steady flow in thermodynamics?
A flow is said to be steady flow if the properties does not change with respect to time at a given
location,
14, What is uniform flow in thermodynamics?
A flow is said to be uniform flow if the properties do not change with respect to location at a given
time.
15, What is entropy change for a system when heat is added to the system?
When heat is added to the system the entropy of the system always increases.
advertisement
16. What is third law of thermodynamics?
The entropy of perfect crystal of any pure substance approaches zero, as the temperature
approaches to absolute zero.
ntpsitmaww-sanfoundry.comnermodynamics-interview-questions!
30‘0610712024, 16:20 ‘50+ Thermodynamics Interview Questions and Answers - Sanfounery
Latent heat is the heat that is involved in the phase transformation of a substance.
19. What is primary refrigerant in thermodynamics?
Primary refrigerant are those refrigerants that absorbs heat directly from the storage space by
undergoing a cycle. It absorbs the latent heat.
20. What is a secondary refrigerant?
The refrigerant is first cooled by primary refrigerant and then used for cooling at the required place
is called secondary refrigerant. Secondary refrigerant absorbs sensible heat.
advertisement
Intermediate Thermodynamics Interview Questions with Answers
21, What is a heat source in thermodynamics?
A heat source is a type of thermodynamic reservoir which can supply any amount of heat, without
undergoing any temperature change.
22. What is a heat sink in thermodynamics?
Aheat sink is a type of thermodynamic reservoir which can absorb any amount of heat, without
undergoing any temperature change.
23. What is thermal efficiency of vapour power cycle?
ntpsmawwsanfoundry.comMhermodynamics-interview-questions! 410os107r2024, 1520 50+ Thermodynamics Interview Questions and Answers -Sanfounsty
The ratio of net-work output of the cycle to the work developed by the turbine is called back work
ratio.
25. What is the back work ratio in vapour power cycle?
The back work ratio is defined as the ratio of pump work input to the work developed by the
turbine,
26. What is steam rate in vapour power cycle?
Itis also called as specific steam consumption. It relates the power output to amount of steam
necessary to produce it, It is the amount of steam required to produce 1kWh of power.
27. What is heat rate in vapour power cycle?
The heat rate of the vapour power cycle is defined as the amount of heat required by a power plant
to produce 1kWh of power.
28. What is Carnot vapour power cycle?
Itis a cycle which has maximum efficiency, operating between given temperature limits and its
efficiency is independent of property of working fluid. The Carnot cycle is an ideal vapour power
gycle.
29. What is the use of boiler in vapour power cycle?
A boiler is one of the basic components of vapour power cycle, the boiler is used to supply the heat
to the working fluid.
30. What is the use of turbine in vapour power cycle?
Abooiler is one of the basic components of vapour power cycle, the turbine is used to expand the
high pressure and high temperature steam coming from the boiler, The output from the power
cycle is obtained at the shaft of the turbine.
31, What is the use of condenser in vapour power cycle?
A condenser is one of the basic components of vapour power cycle, the condenser is attached at
the exit of the turbine, The vapour coming from the turbine is wet vapour and is completely
condensed into the condenser.
32. What is the use of a pump in vapour power cycle?
A pump is one of the basic components of vapour power cycle, the liquid condensate from the
condenser is pumped to the operating pressure of the boiler with the help of pump. The pump
ntpstmawwsanfoundry.comMthermodynamics-interview-questions! 510os107r2024, 1520 50+ Thermodynamics Interview Questions and Answers -Sanfounsty
The two methods used for improving the efficiency of vapour power cycle are reheating and
regeneration.
34, What is a binary vapour power cycle?
The binary vapour power cycle is the combination of two cycles. One cycle operates in the high
temperature region and the other operates in the low temperature region.
35. What is the thermal efficiency of boiler in vapour power cycle?
The thermal efficiency of boiler is expressed in terms of ratio of the heat energy utilized to generate
steam to the heat energy supplied to the boiler by burning of fuel
36. What are boiler mountings used in the vapour power cycle?
The item which is used for safety of the boiler is called as boiler mounting. The items such as stop
valve, safety valve, fusible plug, pressure gauges are some examples of boiler mounting.
37. What are boiler accessories used in vapour power cycle?
The item which is used to increase the efficiency of boiler is called boiler accessories. The items such
as super-heaters, economizers are some examples of boiler accessories.
38. What are fire tube boilers used in vapour power plant?
The fire tube boilers are boilers in which, the hot gases are inside the tubes and the water is
surrounding the tubes. Examples of fire tube boilers are: Cochran and Lancashire boilers.
39, What are water tube boilers used in vapour power plant?
The water tube boilers are boilers in which, the water is inside the tubes and the hot gases
surrounds them. Examples of water tube boilers are: Babcock and Wilcox, Stirling boiler and Yarrow
boiler.
40. What is super critical boiler used in vapour power plant?
The boiler whose operating parameters are above critical point which is pressure= 221.2 bar and
temperature 373 oK is called as super critical boiler.
41, What is natural circulation boiler used in vapour power plant?
The boiler in which the circulation of water takes place due to the natural convection current is
called as natural convection boiler.
42. What is forced circulation boiler used in vapour power plant?
ntpsmawwsanfoundry.comMhermodynamics-interview-questions! 610osi07/2024, 15:20 '50+ Thermodynamics Intrvlow Questions and Answers - Sanfoundry
43. What is the mean effective pressure used in power calculation of internal combustion
engine?
The pressure inside the cylinder is continuously varying during the cycle, the mean effective
pressure is defined as the hypothetical pressure which is thought to be action on piston throughout
the cycle.
44, What is exergy in thermodynamics?
The portion of energy supplied as heat which can be converted into work by a reversible engine is
called as exergy.
45. What is the equation of Gibbs phase rule?
The equation of Gibbs phase rule is written as F+P = C+2 where, F is degrees of freedom of system,
P is the number of phases and Cis the number of components.
46, What are azeotropes in refrigeration?
An azeotrope is a mixture of two refrigerants which cannot be separated into its constituents with
the change in temperature or pressure or both.
47. What is an antifreeze solution in refrigeration?
Antifreeze compounds are those which when added to water decrease its freezing point. The most
commonly used antifreeze compounds are glycols and glycerine.
48. What is a quasi-static process?
When a system changes its state very slowly under the influence of infinitesimal driving forces such
a process is called as quasi-static process.
49, What is the main difference between work and heat?
The main difference between work and heat is that work can be converted 100% into heat but heat
cannot be converted 100% into work.
Useful Resources:
* 1000 Thermodynamics MCQs
+ Chemical Engineering Thermodynamics Interview Questions
ntpstmawwsanfoundry.comMthermodynamics-interview-questions! 70‘0610712024, 16:20 ‘50+ Thermodynamics Interview Questions and Answers - Sanfouncry
advertisement
Recommended Articles:
1. Gas Dynamics Questions and Answers - First Law of Thermodynamics (Energy Equation)
2. Class 11 Chemistry MCQ - Thermodynamics
3. Thermodynamics Questions and Answers - Temperature-Entropy Plot
4, Chemical Engineering Thermodynamics Interview Questions
5, Engineering Physics Questions and Answers - Thermodynamics - 2
6. Thermodynamics Questions and Answers - Reversible Adiabatic Work in a Steady Flow
System and Entropy and Disorder
7. Class 11 Chemistry MCQ - Thermodynamics - Measurement of AU and AH: Calorimetry
8, Thermodynamics Questions and Answers - Specific Heat at Constant Volume and Pressure
and Control Volume
9. Gas Dynamics Questions and Answers - Second Law of Thermodynamics (Entropy Equation)
10. Class 11 Physics MCQ - Thermodynamic Processes
advertisement
https timww-sanfoundry comtnermodynamics-interview-questions! ano‘0610712024, 16:20 ‘50+ Thermodynamics Interview Questions and Answers - Sanfounery
Additional Resources:
‘+ Engineering Thermodynamics MCQ Questions
«Thermal Engineering MCQ Questions
‘Fluid Mechanics MCQ Questions
‘+ C Programming Interview Questions
‘+ Engineering Physics MCQ Questions
Popular Pages:
‘+ Power Plant Engineering MCQ Questions
+ Heat Transfer MCQ Questions
‘* Chemical Process Calculation MCQ Questions
+ Steam and Gas Turbines MCQ Questions
+ Chemical Engineering MCQ Questions
Subscribe Sanfoundry Newsletter and Posts
Name"
Email"
Subscribe to our Newsletters (Subject-wise). Participate in the Sanfoundry Certification contest to
get free Certificate of Merit. Join our social networks below and stay updated with latest contests,
videos, internships and jobs!
tipsifmaww-sanfoundry.comithermodynamics-interview-questions!
en0‘0610712024, 16:20 ‘50+ Thermodynamics Interview Questions and Answers - Sanfoundty
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is
Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on
development of Linux Kernel, SAN Technologies, Advanced C, Data
Structures & Alogrithms. Stay connected with him at Linkedin.
Subscribe to his free Masterclasses at Youtube & discussions at Telegram
SanfoundryClasses.
About | Certifications | Internships | Jobs | Privacy Policy | Terms | Copyright | Contact
CPO O Ze mn ence
hitps:ilwwusanfoundry.comfhermadynamics-interview-questions! t00