Professional Documents
Culture Documents
Fosroc India Product Summry Guide
Fosroc India Product Summry Guide
Our Profile
Fosroc commenced its Indian operations in 1981 and established a 100% subsidiary in 1999.
Fosroc Chemicals (India) Pvt. Ltd. works closely with its customers, including distribution and
Applicator associates, through its well-equipped technical service department, a network of
sales engineers, customer service professionals, Concrete technologist, Specification team etc.
Fosroc India prides itself for the level of technical and customer support that it gives to its valued
customers.
International leverage gives Fosroc the Fosroc Chemicals (India) Pvt. Ltd. remains
opportunity to offer tried and tested focused on the Industry, Infrastructure
solutions from one geographical region to and Building Segment with a wide range of
another with great confidence. quality products.
Admixtures and Surface Treatments
Fosroc Chemicals (India) Pvt. Ltd. provides
time-tested solutions that include services Grouts and Anchors
such as: Industrial Flooring
Diagnosis and Specification Support Concrete Repair
Application Support Protective Coatings
Distribution Support Joint Sealants and Adhesives
After-Sales Service Waterproofing
Mix design support Cement Additives
Contents:
Admixtures 04 - 08
Surface Treatments 09
Concrete Repairs 12 - 14
Industrial Flooring 15 - 17
Protective Coatings 18 - 21
Joint Sealants 22
Waterproofing 23 - 27
Adhesives 28 - 29
Conplast P211 Water reducing admixture. All structural and general concrete where 0.2 to 0.5 litre / 100kg
5, 20 and 200 litres Conforms to IS:9103-99 & improved density and quality are required. of total cementitious material
Complies with ASTMC494 as Cement saving where excess cement proves
Type A & IS:2465. necessary to obtain target strength.
Conplast P505 High performance slump retaining Cement saving can be made without 0.4 to 1.0 litre / 100kg
5, 20 and 200 litres and water reducing admixtures. reduction in strength and workability. Used of total cementitious material
Complies with BS 5075 part 1 and for all structural concrete where improved
ASTMC494 as Type B and D & density and quality are required.
IS:9103-99.
Retarding Plasticisers
Conplast RP264 Retarding and water reducing Avoidance of cold joints where delay in transport 0.2 to 0.6 litre / 100kg
5, 20 and 200 litres admixture. Conforms to IS9103-99. and placing of concrete occurs-towers, chimneys, of total cementitious material
Also complies with ASTM C494 High-rise buildings, using slip form shutters,
Type B and Type D. tunnels/shaft lining, offshore construction and
piles.
Conplast R Retarding water reducing To extend the working life of semi-dry concrete 0.25 to 0.6 litre per 100 kg of
20, 200 litre & bulk admixture. Conplast R complies screeds. Particularly suitable for use in mixes total cementitious material
with BS 5075 Part 1 and with ASTM having fly ash and also improve the working
supply. life of semi dry concrete mixes, specifically RCC
C494 as Type B and Type D.
(Roller Compacted Concrete) type of mixes.
Conplast SR Surface retarder for Surface retarder for producing exposed 8-12m2/ litres
5,20 and 200 litres concrete. aggregate concrete finish in face-down
precast concrete manufacture.
Conplast SP 430 High range super plasticising Speeds up construction, increases 0.5 to 1.5 litre per 100 kg of
5, 20, 200 litres. Also in admixture. Complies with workability and cohesion, aids pumping total cementitious material
200 & 250 Kg IS:9103:1999 and BS 5075 Part 3, it by reducing line friction and dry packing,
also conforms to ASTM C-494 Type low porosity resulting in sustainability
F and Type G depending on the improved water penetration resistance.
dosage used.
Conplast SP 430ES2 High performance super plasticising To provide increased ultimate strength gain 0.6 - 1.5 litres per 100 kg of
200 litres 250 kg & bulk admixture. Conplast SP430 ES2 by significantly reducing water demand in a total cementitious material
supply complies with IS9103:1999, BS 5075 concrete mix. To provide improved durability
Part 3 and with ASTM C494 Type ‘G’ by increasing ultimate strength and reducing
admixture depending on dosage concrete permeability.
used.
Conplast SP 430SRV Slump retention admixture for Conplast SP430SRV is used where a high 0.35 to 0.90 litres / 100
200 litres & 250 kg structural concrete Conplast degree of workability is required and also as kg - for normal mixes &
SP430SRV complies with the an aid to workability retention where delays 0.5 to 1 litre/100 kg for high
requirement of ASTM C 494-80 as in transportation or placing are likely or when cement content mixes.
a Type G & IS:9103-1999. high ambient temperatures cause rapid
slump loss.
Conplast SP 430G8 High performance super plasticising To produce pumpable concrete to obtain 0.5 - 1.5 litres /100 kg
200 litres and 250 kg admixture. Conplast SP430 G8 high strength by substantial reduction in of total cementitious
complies with IS:9103:1999 and water resulting in low permeability and high material
BS:5075 Part 3. Conplast SP430 G8 early strength.
conforms to ASTM-C-494 Type ‘G’.
04 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Conpalst SP 430 Conplast SP430KR(M)6 has been • To produce pumpable concrete 0.5 - 1.5 litres /100 kg
KRM6 specially formulated to give high • To produce high strength, high grade of total cementitious
5, 20 and 200 litre water reductions up to 25% without concrete M30 & above by substantial material
bulk supply. loss of workability or to produce reduction in water resulting in low
high quality concrete of reduced permeability and high early strength.
permeability.
• To produce high workability concrete
requiring little or no vibration during
placing.
Conplast SP430 ITPQ Super plasticising admixture for Best Suitable for PQC concrete by 0.5 - 1.5 litres/100kg
200 kg & bulk supply. PQC concrete. Conplast SP430ITPQ substantial reduction in water resulting in of total cementitious
complies with IS:9103:1999 and low permeability and high early strength. material
BS:5075 Part 3. Conplast SP430
conforms to ASTM-C-494 Type ‘G’
depending on the dosage used.
Conplast SP 500KL High performance water reducing To produce pumpable concrete to obtain
and super plasticising admixture. high strength by substantial reduction in 0.5 - 1.3 litres /100 kg
200, 250 kg & bulk
Conplast SP500 KL complies with water resulting in low permeability and high of total cementitious
supply
IS:9103:1999 (2007) and conforms early strength. material
to ASTM-C-494 Type ‘G’.
Conpalst SP550 Conplast SP550 has been specially • To produce pumpable concrete
formulated to give higher water 0.5 - 1.5 litres /100 kg
250 Kg drums & bulk • To produce high strength, high grade
reductions without loss of of total cementitious
supply. concrete by substantial reduction in
workability or to produce high material
water resulting in low permeability and
quality concrete of reduced high early strength.
permeability.
• To produce high workability concrete
requiring little or no vibration during
placing.
Conplast SP 600 High range water reducing, super To produce pumpable concrete for
plasticising and slump retaining low water cement ratio by substantial 0.5 - 1.3 litres /100 kg
200, 250 kg & bulk
admixture. Conplast SP600 complies reduction in water resulting in low of total cementitious
supply
with IS:9103:1999 and BS:5075 Part material
permeability and high early strength.
3. Conplast SP600 conforms to
ASTM-C-494 Type ‘D’ and Type ‘G’
depending on the dosages used.
Conplast AEA Air entraining admixture. To produce air entrained concrete for
Conplast AEA complies with increased durability and resistance to 0.08 litres /100 kg of
20 and 200 litres &
BS 5075 Part 2, BS 4887 Part 1, damage by frost and deicing salts. Typical total cementitious
bulk supply.
ASTM C260. applications include concrete roads and material
concrete dams, airport runways and
taxiways and other extensive areas of
concrete exposed to potential frost damage.
Auramix 300 Advanced low viscosity retarding Auramix 300 is a high performance retarding 0.5 to 3.0 litres/100 kg of total
200, 250 kg and bulk super plasticiser, based on poly super plasticiser intended for applications where cementitious material
supply. carboxylic technology retardation and long workability retention are
required, and it has been developed for use
in : Mass raft foundation, Pumped concrete,
Concrete requiring long workability retention,
High performance concrete.
www.fosroc.com 05
Product Description Typical Uses Dosage/Coverage/Yield
Auramix 350 High performance PCE based Auramix 350 is a high performance super 0.3 to 1.5 percent
200 kg and bulk supply. admixture for wide range of plasticizer suitable for low and high grade by weight of total
concrete grades. Auramix 350 concrete and intended for applications cementitious material
complies to IS:9103 : 1999 as a where high water reduction and long
water reducing admixture. workability retentions are required.
Auramix 350 PQC High performance PCE based Best suitable for PQC concrete 0.3 to 1.3 percent
200 kg, 250 kg, and admixture for pavement quality by weight of total
bulk supply. concrete grades for road concrete cement binder
Complies to IS:9103 : 1999 and
ASTM C494 as a water reducing
admixture
Auramix 400 Advanced low viscosity high Auramix 400 is a high performance super 0.4 to 2 percent by weight
200 Kg, 250 Kg and performance super plasticiser, plasticiser intended for applications where of total cementitious
bulk supply. based on poly carboxylic high water reduction and long workability material
technology. Auramix 400 complies retention are required, and it has been
with IS:9103-1999(2007). It also developed for use in: Self-compacting
complies with ASTM C494 Type G. concrete, Pumped concrete, Concrete
requiring long workability retention.
Auramix 450 High range water reducing Used where high water reduction & long 0.5 - 2 litres per 100 kg of
200 Kg, 250 Kg and admixture based on poly worka bility retention is required in SCC, cementitious material
bulk supply. carboxylic technology. Combines pumped concrete, High performance
the properties of water reduction concrete
and workability retention
Auramix 300 Plus Robust concrete admixture for Auramix 300 Plus is a high performance 0.4 to 2 percent by weight
200, 250 kg and bulk long workability retention with retarding super plasticiser intended for of total cementitious
supply. good rheology. applications where retardation and long material
workability retention (4 hours
and more).
Structuro 201 A high performance concrete For applications where increased early and The normal dosage
200 Liters. superplasticiser, based on ultimate compressive strengths are required, range is between 0.4
polycarboxylic technology. and it has been developed for use in: Precast to 2.0 liters/100 kg of
applications, High early strength, High cementitious material
performance concrete, Self-compacting concrete,
Concrete requiring long workability retention.
Structuro 203 A high performance concrete Precast applications Concrete requiring long The normal dosage
200 litre and 250kg. super plasticiser, based on workability retention High performance range is between 0.5
polycarboxylic technology. concrete. to 3.0 liters/100 kg of
cementitious material
Auramix BCI Organic Bipolar concrete Used as corrosion inhibiting admixture for all Auramix BCI is
200kg, 240kg barrels penetrating corrosion inhibiting reinforced concrete. recommended to use at a
and bulk supply. admixture. dosage of 3 to 5kgs/m3
Auracast 270M High performance low viscosity Auracast 270M is a high performance 0.5 to 1.5 percent
200 kg, 250 kg and PCE based admixture for early super plasticizer suitable for precast by weight of total
bulk supply. strength with slump retention. concrete industry to obtain high early cementitious material
Auracast 270M complies to strength and workability retention.
IS:9103:1999 as a super plasticizer
and ASTM C 494 Type F and G
depending on dosage.
06 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Auracast 405 High performance low viscosity Auracast 405 is a high performance super 0.5 to 1.5 percent
200 kg, 250 kg and bulk PCE based admixture for SCC plasticizer suitable for precast concrete by weight of total
supply. & early strength. Auracast 405 industry to obtain high early strength and cementitious material
complies to IS:9103 : 1999 as a workability retention. Suitable for Self-
water reducing admixture. compacting concrete.
Auracast 50 Concrete admixture for precast Precast concrete such as Electric poles, 0.2 - 2 litres /100 kg
concrete elements to obtain precast manholes, cement tiles, precast of total cementitious
20 kg, 200 kg gutters, kerb stones, building blocks etc. material
high early compressive strength
and bulk supply complies to IS:9103:1999 and
ASTM C494 Type F.
Conplast NC Chloride free accelerating To accelerate the setting and early strength 2 - 3 litres /100 kg of
5, 20, 200 litres admixture, complies with gain of port land cement concrete and total cementitious
IS:9103-99, BS 5075 Part 1 mortar. Typical application includes precast material
& 200 kg and ASTM C494 Type C. concrete sections, concrete placed in cold
weather conditions and concrete repairs etc.
Conplast CN Calcium nitrite based corrosion As a corrosion inhibiting admixture 7.5-22.5 litre m3
20 and 200 litres inhibiting admixture. in reinforced concrete. approximately 2-6%
by weight of total
cementitious material
Special Admixtures
Underwater Admixture
Conplast UW(L) Anti washout admixture for Designed to allow concrete to be 0.6 to 1% by weight
200 litres Underwater concreting. placed underwater. of total cementitious
material
Conplast Crystalline Integral waterproofing admixture Conplast Crystalline is an integral waterproofing 1 to 2 % by weight
30 kg based on crystalline formation to admixture to produce water tight concrete. The of total cementitious
produce water tight concrete. active chemical in Conplast Crystalline react with material
moisture available in concrete to produce non
soluble crystal formation throughout the pores of
capillary tracks thus making concrete permanently
sealed against water penetration from any
direction. Conplast Crystalline is developed to use
in all types of concrete foundation below ground,
water reservoir, tunnel concreting, retaining walls
and subways, water tank and swimming pools &
precast unit.
Conplast WP90 Powder Integral waterproofing powder To reduce the permeability of concrete 1 kg/bag of total
1 and 25 Kg additive for concrete and mortar and cement mortar for use in basements, cementitious material
Conforms to IS:2645-2003. roof slabs, screeds and water tanks.
www.fosroc.com 07
Product Description Typical Uses Dosage/Coverage/Yield
Conplast SD110 Cement saver for concrete Conplast SD110 is used to reduce material 0.40 litres/100 Kg
5, 20, and 200 litre blocks. cost by reduction in cement without loss of of total cementitious
strength or by increasing strength without material
additional cement. To get high early strength
to improve productivity.
Sprayset HBP Powder shotcrete admixture. Used to enable a high build of sprayed 2 to 5 kg/100 kg of total
25kg. sprayset HBP meets the concrete, shotcrete and gunite. To provide set cementitious material
requirements of ACI 506-56 acceleration and reduce rebound loss.
(recommended practice for
shotcreting - concrete society
specification for sprayed concrete).
Sprayset SL Sprayed concrete admixture. Used in spray concrete, shotcrete and gunite 1.0 to 5.0 litres/100 kg of
250kg and 280kg. Stiffening of concrete occurs processes where rapid setting is required. total cementitious material
approximately after 10 seconds.
08 www.fosroc.com
Surface Treatments
Curing membranes & release agents to improve the
surface finish of concrete.
Curing Compounds
Concure WB Low viscosity wax emulsion, water For spraying on freshly cast concrete, or newly 3-5 m2/litre
5, 20 and 200 litre based concrete curing compound. exposed concrete surfaces after removal of
(Available in white & Complies to ASTM C 309-90. form work, to form a temporary membrane
Clear) which will retain sufficient moisture for effective
curing to take place.
Concure LP90/LP90M High efficiency polymer based film Suitable for all general concreting applications The recommended
20 and 200 litre forming curing agent and of particular benefit for large area concrete coverage rate is between
surfaces, such as airport runways, roads and 3.5 and 5.0sq.m / litre
bridgeworks, Pavement Concrete (0.200 to 0.285 litres/
sq.m).
Concure 1315 Eco-friendly, acrylic resin based, Provides a clear curing, sealing and dust proofing 5-7 m2/litre
5, 20 and 200 litre clear curing compound, sealer and compound, which can be used in a wide range of
(Available in white & dust proofer. Complies to ASTM applications:
Clear) C1315 Type 1, class A • High rise construction to eliminate water curing
• Floors, warehouses, slabs and columns
• Self-curing, primer system to subsequent
coverings
Reebol Emulsion Xtra Concentrated and emulsified For easy stain free removal of concrete 1 litre of Reebol emulsion
5, 20 and 200 litre chemical mould release agent. moulds and form work of all types, Xtra when diluted with
particularly where wooden form work is 6 litres of water will cover
used and de moulding and stripping times 80-180m2 depending upon
exceed 24 hrs. the nature of the substrate.
Reebaklens RR Rust remover, cleaning and Reebaklens RR is used as a rust remover from Approx. 2.0 - 2.5 m2/L
0.5, 1 and 5 litre etching agent steel bars prior to encasing in concrete / micro
concrete. It can also be used on other steel
surfaces prior to coating with epoxy systems.
www.fosroc.com 09
Grouts & Anchors
A complete range of high precision cementitious & epoxy based grouts for
machine foundation, bridge bearings, rail grouts & precast industry.
Cementitious Grouts
Conbextra GP1 Non shrink cementitious grout. Static load applications like steel column 12.5 Ltrs / 25 kg bag @
25 kg Complies to ASTM C 1107 Type A. foundation, pipe rack foundations and Flowable Consistency
equipments with only static load.
Conbextra STD Free flow, high strength, non- The grouting of base plates of turbines, The approximate
25 kg shrink, cementitious precision compressors, boiler feed pumps etc., It can yield per 25 kg bag for
grout also be used for anchoring a wide range of different consistency is
fixings. These include masts, anchor bolts W/p 0.13 Yield ( litres)
and fence posts. 12.5.
Conbextra GP2 Plastic shrinkage compensated, Machine foundation grout with both Static 13.3 Ltrs / 25 kg bag @
25 kg high flow, high strength & dynamic loads, bridge bearings, precast Flowable Consistency
cementitious grout. Complies to construction etc.
ASTM C 1107 Type A.
Conbextra GP2 N Plastic shrinkage compensated, high Machine foundation grout with both Static 15.8 Ltrs / 30 Kg bag @
30 kg flow, high strength cementitious & dynamic loads, bridge bearings, precast Flowable Consistency
grout with low exothermic heat. construction etc.
Complies to ASTM C 1107 Type A.
Conbextra GP3 Dual shrinkage compensated, high Machine foundation grout with both 15.5 Ltrs / 30 Kg
30 kg strength, high flow cementitious grout. static and dynamic loads, bridge bag at Flowable
Complies to ASTM C 1107 Type C. bearings etc. Consistency
Conbextra GP4 Dual shrinkage compensated, high Machine foundation grout with both 12.7 Ltrs / 25 Kg
25 kg strength, high flow cementitious grout. static and dynamic loads, bridge bag at Flowable
Complies to ASTM C 1107 Type C. bearings etc. Consistency
Conbextra GP5 Dual shrinkage compensated, ultra high Machine foundation grout with both 11.5 Ltrs / 25 Kg
25 kg strength, high flow cementitious grout. static and dynamic loads, bridge bag at Flowable
Complies to ASTM C 1107 Type C. bearings etc. Consistency
Conbextra TS Plastic shrinkage compensated, high Suitable for grouting sections with section 12 Ltrs / 25 kg bag @
25 kg flow, high strength cementitious grout thickness up to 250 mm. Flowable Consistency
with low exothermic heat and suitable
for grouting thickness up to 250 mm.
Complies to ASTM C 1107 Type A.
Conbextra HF Dual shrinkage compensated, Machine foundation grout with both Static 13.25 Ltrs / 25 kg bag @
25 kg ultra high flow, high strength & dynamic loads, bridge bearings etc. Flowable Consistency
cementitious grout. Complies to
ASTM C 1107 Type C.
Conbextra AT Plastic shrinkage compensated, Machine foundation, bridge bearings, precast 12.5 Ltrs / 25 kg bag @
25 kg high flow, high early & ultimate construction etc. Flowable Consistency
strength cementitious grout.
Complies to ASTM C 1107 Type A.
Conbextra HES Plastic shrinkage compensated, Machine foundation grout, bridge bearings, 9 Ltrs / 15 Kg Bag @
15 kg high flow, high early & ultimate precast construction where high early strength Flowable Consistency
strength cementitious grout. is the prime criteria.
Complies to ASTM C 1107 Type A.
Conbextra UHS Plastic shrinkage compensated, Machine foundation grout, bridge bearings, 12 Ltrs / 25 Kg Bag @
25 kg high flow, high early & ultimate precast construction etc. Flowable Consistency
strength cementitious grout.
Complies to ASTM C 1107 Type A.
Conbextra HR Heat resistant cementitious grout. Machine foundations subjected to heat 12 Ltrs / 25 Kg Bag @
25 kg Complies to ASTM C 1107 Type A. exposure. Flowable Consistency
Conbextra BB72 IN Free Flow, Non Shrink, High Conbextra BB72-IN is designed for precision Fluid: 13.15 ltrs / bag
25 kg Strength Cementitious precision grouting of foundations with heavy loads.
grout Product is specifically suitable for grouting joints
in of precast concrete wind turbine towers.
Conbextra BB92 O Sulphate resistant high early and On shore windmill grout. 11.5 Ltrs / 25 Kg Bag @
25 kg ultimate strength onshore wind Flowable Consistency
mill grout. Complies to ASTM C
1107 Type A.
Conbextra BB92 IN Free flow, High strength, Non Grouting base frame of metal wind turbine Refer datasheet
25 kg and Shrink, Cementitious precision foundations and also horizontal & vertical joints
500 kg jumbo bag grout of precast wind turbine towers, filling of voids in
narrow or congested spaces.
Conbextra UW Anti washout, non shrink, high Under water repairs. 14.5 Ltrs / 25 Kg Bag @
25 kg strength cementitious under Flowable Consistency
water grout. Complies to ASTM C
1107 Type A.
10 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Epoxy Grouts
Conbextra EP10 Low viscosity epoxy Structural crack repair. Refer datasheet
1 Ltr injection grout.
Conbextra EP10(M)
1.5 Ltr Moisture insensitive epoxy resin Conbextra EP10(M) is a two part epoxy Refer datasheet
injection material. resin system for grouting gaps ranging from
0.25mm to 9mm.
Conbextra EP 75 High flow, high early & ultimate Machine base grouting of heavy duty Refer datasheet
14 Ltrs strength epoxy grout suitable for compressors, rail plates in ballast less
grouting thickness up to 75 mm. track.
Complies to ASTM C 1181.
Conbextra EP 300 Low exotherm epoxy grout. Machine base grouting of heavy duty Refer datasheet
14 Ltrs Suitable for grouting thickness compressors, rail plates in ballast less
up to 300 mm. Complies to track with grouting section thickness up
ASTM C 1181. to 300 mm.
Conbextra EBG (M) Epoxy resin bearing grout. Elastomeric Bearing Pads, bridge Refer datasheet
3 Ltrs Complies to ASTM C 1181. bearing plates.
Chemical Anchors
Lokfix Polyester resin grout. For high strength corrosion resistant Refer datasheet
0.5 & 2.5 Ltrs Complies to BS 4551 anchoring of bolts and bars from 12-50 mm
BS 5080 & BS 2782. diameter into concrete, rock, masonry or
brickwork where high speed of installation
and early application of load is required.
Lokfix E77 High performance pure epoxy For high strength corrosion resistant Refer Product
585ml 3:1 resin cartridge system, for anchoring of bolts and bars from 12-50 mm Technical data
cartridges anchoring reinforcement and diameter into concrete, rock, masonry or sheet
fixings into a variety of substrates brickwork where high speed of installation
and early application of load is required.
Lokfix E55S Styrene free vinyl-ester resin Fixing of post installed reinforcement Refer Product
300ml based cartridge system, for Anchoring of threaded rod fixings Technical data
cartridges anchoring reinforcement, fixings For horizontal, vertical and overhead application sheet
into a variety of substrates Bonding and surface crack sealing applications
Lokfix E45T Vinylester - Styrene free foil tube Fixing of post installed reinforcement Refer Product
300ml cartridge - tropical grade base Anchoring of threaded rod fixings Technical data
cartridges cartridge system, anchoring For horizontal, vertical and overhead application sheet
reinforcement and lightweight Bonding and surface crack sealing applications
fixings into a variety of substrates.
Lokfix RA Polyester resin grout for anchoring Fixing of bolts and bars from 10-40 mm Refer Product
1 & 5 Ltrs reinforcement and fixings into Rocks diameter into the rock. Permanent installation Technical data
of reinforcement bars, foundation bolts, base sheet
plates, barriers and safety fences, waler beam
anchoring, ground anchors for towers, cranes,
dock sills etc., in rocks.
Cebex 200 Plasticising and hydrogen Cebex 200 is an admixture for cement grouts Refer datasheet
225 g free expansion grout where a reduced water / cement ratio and
admixture. positive expansion are required. Applications
Complies to BS : 5075. include bed grouting, duct grouting, non-shrink
infilling and jointing.
Cebex EN Plasticising and hydrogen Used an admixture for cement grouts where Dosage best
225 gm packs free expansion grout a reduced water / cement ratio and positive determined by
admixture expansion are required. Applications include site trials
bed grouting, duct grouting, non-shrink infilling
and jointing.
Conbextra Pre-bagged, non-shrink Post tensioned cable ducts and Yield 16.5 litres
Cable grout cementitious grout for Prestressed cable ducts / 25 kg bag
225 kg bags post tensioned cables (approx)
Conbextra Pre-bagged, non-shrink Conbextra Cable Grout HS is used for grouting Yield 15.5 litres /
Cable grout HS cementitious grout for post of PT cable ducts. The product can also be used 25 kg bag
225 kg bags tensioned cable duct grouting for grouting ground anchors with small gaps (approx)
www.fosroc.com 11
Concrete Repairs
Primers, cement and resin based materials to reinstate defective
concrete.
Cementitious Putties & Plugging Compounds for Non-Structural Cracks & Pin Holes
Renderoc CS Single part, non-shrink, For sealing cracks on plaster, masonry 1Kg of mixed material
1 kg cementitious, crack sealer for and concrete substrates. covers 30 RM for a groove
plaster, masonry and concrete. size of 6 mm X 6 mm
Renderoc CF Crack filler. For sealing cracks on plaster, masonry 1Kg of mixed material
1, 5 & 25 kg and concrete substrates. covers 30 RM for a groove
size of 6 mm X 6 mm
Renderoc FC Single component polymer modified For application to minor imperfections in concrete 4 m2@3 mm thickness
20 kg cementitious pinhole filler. and masonry surface up to 0-3 mm range. for 20 kg bag
Renderoc Plug Rapid setting cement based water For the rapid temporary patching and plugging
1 kg & 5 kg leak plugging mortar. of concrete segments, concrete and brick tunnel
linings, sewage systems, below ground access
chambers.
Renderoc S2 Structural grade prepacked Reinstatement of spalled concrete 1.3 m2 at 10 mm thickness per
Powder 25 kg cement mortar. members like beams, columns, walls etc. 25.25 kg bag
Liquid 0.25 kg
Renderoc SP 40 Single component, fibre Renderoc SP40 is suitable for wet spraying Approximately 13.5 litres
25 kg reinforced shrinkage and hand application in a wide variety of per 25 kg bags
compensated, polymer repair applications, and is particularly well
modified structural grade suited to vertical and overhead repairs. Typical
repair mortar (M 45 grade). applications would include, but not be limited to,
repairs to irregular profiles. repairs to any
structural concrete members.
Renderoc HS Xtra Single component, fibre Renderoc HSXtra is suitable for hand and spray 13.4 litres per 25 kg bags
25 kg reinforced, high strength, application for repairs where high load bearing
shrinkage compensated, polymer is required. Typical applications would include,
modified structural grade repair but not be limited to Vertical and overhead
mortar (M 80 grade). repairs to restore ‘covercrete’.General concrete
and masonry repairs. Voids greater than 10 mm
deep. Repairs to honeycombing. Larger scale
repairs where form work cannot be erected.
Renderoc DS 40 Single component, shrinkage Renderoc DS40 is designed for large area Approx. 12.5 litres / 25 kg
25 kg compensated, structural grade, repairs such as bridges, tunnels, retaining bags (approx. 80 bags/m³)
dry spray applied polymer walls, dams, refurbishment of columns etc.
modified, repair mortar for
concrete (M 45 grade).
Patchroc Shrinkage compensated, medium Rapid reinstatement of large areas of 12.6 litres/25 kg
25 kg fast setting, cementitious repair concrete pavements, roadways, factory
mortar for industrial floors, floors & car parks.
pavement quality concrete (PQC)
and airport aprons (M40 grade).
Renderoc RSXtra Dual shrinkage compensated, For the emergency reinstatement of damaged 7.5 litres / 15 kg bag
15 kg rapid setting, repair concrete for or deteriorated concrete. For both internal and
pavement quality concrete (PQC) external use.
(M45 grade).
12 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
www.fosroc.com 13
Product Description Typical Uses Dosage/Coverage/Yield
Fibre Reinforced Polymer Composite Wrapping & Laminate Systems for Structural Strengthening (FRP)
Nitowrap GW Glass and carbon fibre fabric Used for strengthening columns, beams, slabs load Contact Fosroc
Nitowrap CWS reinforced, high performance, high bearing structures particularly where improvement
100m length / roll strength, composite fibre wrapping to shear strength and deformation characteristics are
Width 0.5m x 100mm. system for structural strengthening. required. It is ideal for seismic retrofitting also typical
applications include piers, columns, bridges, towers,
pipes, chimneys, tunnels and other structures etc.
Nitowrap CF(CS) High Strength, Non Corrosive, Typical applications include, but are not limited Contact Fosroc
1Roll Size of 1m x 50m. Carbon Fiber Reinforced to, dynamic and dead load increases, seismic
Cementitious Matrix System. strengthening, strengthening of structures for
flexure, shear and axial loads.
Nitoplate CPS High performance, high strength, For increasing load carrying capacity of structural Contact Fosroc
100m length / roll corrosion resistant pultruded members particularly where increase in live load/
carbon fibre plates /laminates for traffic loads is expected.
Width: 25, 50, 80, 100mm
in 1.2 & 1.4mm thick. structural strengthening.
Nitoplate Crackfix High Strength Carbon Fibre Plates Majorly used but not limited to applications as Contact Fosroc
(300 x 10 x 1.5mm) for stitching of cracks in concrete mentioned, cracks in podium slabs, cracks on roof
and masonry. slabs prior to installing waterproofing system,
25 Nos per pack.
settlement/Cracks in masonry walls, masonry arch
bridges, cracks in shells, domes, etc.
Ready Plaster
Renderoc Ready Pre-packed cement based ready to For external and internal plastering - on walls, 14 to 15 sqft per bag of 40 kg
Plaster use plaster. ceilings, columns and beams. All blocks masonry at 10 - 12 mm thickness.
40 Kg works. Brick and stone masonry works. Coverage may vary depending
on the substrate condition
Damp Proof Coating
Nitoproof Damp High performance two component As a damp proof coating on to plastered surfaces The approximate
Protect elastomeric cementitious damp- before wallputty is applied. coverage at even consistency
15 Kg , 5Kg proof coating. is 15 to 16 sq.ft /kg /coat
Wallputty
Renderoc Wallputty Renderoc Wallputty is a perfect Interior & exterior walls, Concrete blocks and Refer datasheet
1 kg, 5 kg, 20 kg, & blend of white cement, special panels, Precast walls and ceilings
40 kg pack polymers, and minerals that protects
& smoothens walls.
14 www.fosroc.com 13
Industrial Flooring
A complete range of floor surfacing products designed to enhance the
performance characteristics of both new & old concrete floors.
Floor Hardeners
Nitoflor Hardtop / Non metallic, dry shake on floor Ideally suited for all industrial and commercial Application rate kg/m2
Hardtop STD hardeners. floors subjected to the heavy abrasion / Heavy Duty 7.0
25 kg wear suitable for flooring applications in Medium Duty 5.0
heavy engineering industry, warehouses & car Light Duty 3.0
parking.
Nitoflor Lithurin (M) High performance, liquid floor For surface hardening of new and old concrete 10 - 12 m2 / litre
20 & 200 litres hardener & densifier. to prevent dust generation and to reduce
permeability. Typical areas of application
include warehouses, factories, platforms on
both new and existing concrete surface where
epoxies are not desirable.
Underlays
Nitoflor TF 5000 3 - 6 mm Colored epoxy resin The system offers an extremely hard wearing 2.4 m2 /Pack @ 5 mm
12 litres screed with excellent chemical and impact resistant floor. Suitable for
and abrasion resistance. applications in areas subjected to heavy impact
and abrasion in heavy engineering industries,
loading & unloading bays & car park ramps.
Nitoflor EU5 1.5 mm - 5 mm thick self - A self smoothing epoxy screed 7.5 m² / Pack @ 2 mm
15 litres smoothing epoxy based underlay. recommended as an underlay prior to thickness
application of epoxy/PU based floor toppings.
Coatings
Nitoflor FC 140 Epoxy resin based solvented The recommended uses are in production 45 m2 / pack / coat
4.5 litres floor sealer with high chemical & assembly areas, dairies, soft drinks @ 45 microns DFT
abrasion resistance. production and bottling plants, breweries, Recommended in minimum
kitchens, showrooms, aircraft hangars, dust two coats @ 90 Mic. DFT
proof rooms etc. Also used as Colored sealer
coat for screeds like TF 5000.
Nitoflor FC145 High build epoxy resin based The recommended uses are in production 4 m2 / ltr @ 250
4.5 litres solvented floor coating with high assembly areas, dairies, soft drinks Microns WFT per coat
chemical & abrasion resistance. production and bottling plants, breweries, recommended application
kitchens, showrooms, aircraft hangars, dust two coats
proof rooms etc. Also used as coloured
sealer coat for screeds like TF 5000.
Nitoflor FC 150 High build solvent free epoxy Provides a high build, hard 5.0 m² / litre @ 200 microns WFT
4.5 litres resin based floor coating. wearing, chemical and abrasion recommended application 400
resistant floor finish. microns in two coats
Nitoflor FC 400 UH Highly chemical resistant, hybrid Product provides an extremely hard 11.25 m² / pack @ 400
4.5 litres polyurethane based floor coating. wearing & chemical resistant floors microns DFT in two coats
specifically suitable for cold storage with
temperature of up to - 5 deg cel, dairies,
chemical processing units, bottling plants
& waste water treatment plants.
Nitoflor EPW100 Water based epoxy floor coating. Ideal for industrial or commercial locations 20-22 m2 / pack / per coat
4 litres where a hard-wearing, hygienic, dust-free @ 180 microns WFT (100
environment is important. Particularly useful microns DFT)
when moisture content in concrete is more
than 5%.
Nitoflor PUW100 Water based polyurethane coating. Ideal for industrial or commercial locations 10 m2 / litre / coat @
4 litres where a hard-wearing, hygienic, dust-free 100 microns WFT (45
environment is important. Particularly Micron DFT)
useful when moisture content in concrete is
more than 5%.
Toppings
Nitoflor SL Range 0.5 - 4 mm thick self smoothing Ideal for industrial floors where a hard Refer datasheet
SL500 - 4.5 litres seamless epoxy floor toppings. wearing, hygienic, dust free environment is
SL1000 - 6 litres important, Useful for hospital clean rooms,
electronic assembly plants, engineering &
SL2000 - 15 litres
manufacturing industries.
SL3000 - 15 litres
SL4000 - 15 litres
www.fosroc.com 15
Product Description Typical Uses Dosage/Coverage/Yield
Nitoflor SL2050 2 -5 mm thick Flow applied, water To provide a smooth, dense, matt finish, 6 Sqm per pack at 2 mm
12 litre miscible, damp - tolerant epoxy easily cleaned surface resistant to oils and thickness
resin based floor topping. liquids. Suitable for floors in warehouses,
garages, pharmaceutical industries and medical
laboratories, food beverages industries, light
industries and food processing areas.
Nitoflor SL 2 mm thick Epoxy resin based For use in areas where a static conductive or a Conductive undercoat :
Conductive / static conductive/ dissipative static dissipative floor is required as a measure 4.0 Sq.m/litre, Dissipative
Dissipative seamless floor toppings. to control static electricity. Useful for electronic undercoat : 5.5 Sq.m/litre
components assembly areas, painting booths Conductive/Dissipative
Top coat - 15 litres
of automobile plants, explosive material booths Nitoflor Conductive :
Under coat - 2.4 litres
of automobile plants, explosive material 7.5 Sq.m/15 litre pack @
manufacturing units, operation theatres etc. 2mm thickness, Nitoflor
Conductive/Nitoflor
Dissipative
Nitoflor EPU Epoxy Polyurethane resin based Nitoflor EPU Conductive/ Nitoflor EPU Dissipative Nitoflor Conductive undercoat
Conductive / Nitoflor static Conductive/Dissipative system have been designed for use in areas : 4.0 Sqm/litre
EPU Dissipative system self-smoothing floor where a static Conductive or a static Dissipative Nitoflor Dissipative undercoat
Topcoat 15 litre pack toppings floor is required as a measure to control static : 5.5 Sqm/litre
Undercoat 2.4 litre electricity. Typical areas of use include electronics Topcoat:
pack manufacture and assembly, clean rooms, Nitoflor EPU Conductive/
computer rooms, hazardous dust and chemical Nitoflor Dissipative :
environments and hospital operating theatres. 7.5 m2/15 litre pack
@ 2mm thickness
Nitoflor EPU 2000 2 mm thick epoxy polyurethane Ideal for industrial floors where a hard wearing, 7.5 m2 /Pack @ 2 mm
15 litres based floor topping. hygienic, dust free environment is important, thickness
useful for hospital clean rooms, electronic
assembly plants etc.
Nitoflor SL 2000 UB Heavy duty polyurethane Offers high resistance against impact, thermal 7.5 m2/pack @ 2 mm
15 Litres based flow applied. shock, abrasion and chemicals. Resistance to thickness
several organic chemicals used in the food
industry makes the system suitable for use in
various food processing industries.
Trafficguard UR 100 Skid resistant, waterproof flexible Trafficguard UR100 is a modified polyurethane Refer datasheet
Multi coat - Refer protection system for car park based traffic deck system designed to provide an
datasheet decks. added level of protection to, new and existing,
heavily trafficked areas such as car park decks, car
park ramps, turning areas, entrance/exit areas &
thoroughfares.
Trafficguard UR 150 Multilayer, hard wearing, anti skid Specifically recommended for Intermediate Refer datasheet
Multi coat - Refer car park deck coating. decks of Multilevel car parks and also for
datasheet basement car parks.
Nitoflor SL 3000 UT 4 - 6 mm thick PU cementitious Product offers an extremely hard wearing floor 2.5 Sqm @ 4 mm
20.25 kg self smoothing topping. with excellent adhesion to concrete substrates thickness
specifically suitable for industrial floors in food
& beverage, engineering, dairies & pharma.
Nitoflor RT6000UT Resin rich, trowel applied heavy Fosroc Nitoflor RT6000 UT is a heavy duty, trowel 2.23 m²/pack at 6 mm
36.25 Kg duty polyurethane floor screed. applied polyurethane floor screed designed with 1.48 m²/pack at 9 mm
the highest order of durability to resist impact,
abrasion, chemical attack and thermal shock. Its
lightly textured finish makes the product ideal for
both wet and dry processing environments.
Nitoflor Coving UT Trowel applied polyurethane Nitoflor Coving UT is a three-component trowel 1.8 - 2.0 kg/m2/mm
18 kg coving mortar applied coving mortar. Typical application areas thickness
include food and beverage production, dairy
processing, pharmaceutical, heavy duty traffic
and engineering process areas.
Nitoflor HB 200 UT Water-based high-build Fosroc Nitoflor HB200 UT is a three-part 6 m2 per 4.75 kg pack per
4.7 kg polyurethane coating polyurethane coating designed as a sealer for coat (WFT per coat ~200
Fosroc Nitoflor Coving UT mortar. microns)
16 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Polyurea FLM Fast setting, pure polyurea Protective coating for flooring applications in a 1.5 – 3.0 ltrs per m2 @
Part A Iso component : elastomeric floor coating. wide range of environmental conditions. Typical 2mm thickness
200 ltr applications include: industrial floors, processing
plants, food processing areas, workshops &
Part B AMINE
production facilities, manufacturing plants &
component : 200 ltr
plant rooms.
Cemtop Micro T 1 – 5 mm thick, two component, Thin layer industrial wearing course topping for 1mm thickness (14.70 sq.m./Pack)
Part A – 20 kg flow applied, cementitious micro use in areas that are subjected to both foot and 2mm thickness (7.35 sq.m./Pack)
Part B – 5 kg topping. vehicular traffic as an overlay., Typical uses are 3mm thickness (4.90 sq.m./Pack)
for reinstatement of existing floors or as a final 4mm thickness (3.67 sq.m./Pack)
wearing course on new concrete floors where 5mm thickness (2.95 sq.m./Pack)
specified floor tolerances have not been achieved.
Cemtop PS5 5 – 15mm thick, flow applied, Typicall application would include: 5mm thickness
Powder – 20 kg + polishable cementitious screed / Retail stores, B2B stores in shopping malls. (1.8 sq.m. / Pack)
(Treated water) topping. Refurbishment of old floor top surface ranging
(2.1 to 2.25 kg) 5mm to 15mm thickness. Topping for floors
of Schools, Offices, Hospitals, Residential &
commercial floor with polishable topping. Can also
be used for Supermarkets, restaurants, theatres,
sports arena, garage etc.
Cemtop SLU15 5 – 15mm thick, flow applied, Internal and external working conditions for 5mm thickness
Powder – 15 kg self-smoothening cementitious any industrial as well as commercial building (1.45 sq.m. / Pack)
+ (Treated Water) underlay only. floor. Large areas which need to be installed in
(2.7 kg to 3 kg) a single day.
Cemtop OUL15 5 – 15mm thick, one component, All types of industries for floor thicknesses 5mm thickness
25 kg pre-blended, trowel applied ranging from 5mm to 15mm, both for new (2 sq.m. / Pack)
cementitious screed, underlay / floors or resurfacing.
overlay.
Cemtop OUL40 10 – 40mm thick, one component, All types of industries where floor thickness 10mm thickness
25 kg pre blended, trowel applied, requirement ranging 10mm to 40mm either for (1 sq.m. / Pack)
cementitious screed, Underlay / new flooring or refurbishment of old flooring.
Overlay.
Cemtop 250T 3-6 mm thick self levelling Underlay for soft flooring applications like 4.0 m2 /20 Kg bag @
20 kg cementitious floor levelling carpet, vinyl, linoleum and also for wooden 3 mm thickness
compound. floorings.
Cemtop HD Polymer modified, cement based, Typical applications would include: Coverage 12 litres per
20 kgs floor levelling compound - 4mm Forklift trafficked floors, Light industrial 20 kg bag
to 12mm floors, Car parks, Walkways and pavements,
High bay warehousing floors, Garage and
workshops, Underlayment for vinyl sheet,
tiles, carpets etc
Nitoflor ET Slurry Heavy duty, flow applied, Nitoflor ET Slurry system provides a Refer datasheet
11 Litres lightweight anti-skid surface lightweight, yet extremely hard wearing
dressing. anti-skid surface to a variety of substrates
including steel, concrete and timber.
www.fosroc.com 17
Protective Coatings
Coating to protect new & existing structures from attack by atmospheric chlorides &
carbonation, or from exposure to harmful chemicals.
Anti-Corrosive Coatings
Nitozinc Primer Two component, epoxy-zincrich Nitozinc Primer is recommended for priming 4 -5 m2/litre
1 & 5 litre corrosion protection primer for exposed steel reinforcement for use with Fosroc
reinforcement and fabrication concrete repair mortars. The product actively
steel. resists corrosion within the confines of the repair
location and avoids the generation of incipient
anodes in immediately adjacent locations.
Nitocote AP35 Latex acrylic polymer based Provides passivating protection matrix Approximately 8 - 10 m2/
1, 5 and 20 litres cementitious coating for corrosion to reinforcing steel. litre depending on substrate
protection of rebars prior to
concreting.
Dekguard S High performance, pure aliphatic Recommended as a protective and decorative 5 -6 m2/litre/coat
5, 20 litres acrylate based protective and coating for atmospherically exposed RC
decorative exterior anticarbonation structures from long term protection. It is ideally
coating system for concrete and suited for soffit of bridge decks, RC frames
masonry for bridges, industrial in high rise buildings and similar expensive
structures and buildings. infrastructures. Can be used both in repair
ed and new construction situations.
Dekguard S300 High performance, high build, An ideal protective cum decorative Refer datasheet
5, 10 & 20 litres aliphatic acrylate based protective coating for bridges, flyovers, underpasses,
and decorative exterior coating commercial and industrial building.
system for concrete and masonry
surfaces of bridges, industrial
structures and buildings.
Dekguard WB300 High performance, high build, Dekguard WB300 is designed to protect Dekguard WB300:
4 and 20 litres elastomeric, protective cum atmospherically exposed reinforced concrete 2.2m2/litre @ 300
decorative exterior anticarbonation structures above any splash zones from attack micron DFT
coating system for concrete and by chloride ions, oxygen and moisture ingress,
masonry surfaces of bridges and especially where there is a danger of subsequent
buildings conforming to IRC SP 80: cracks appearing within the substrate.
2000 performance specifications.
Dekguard E2000 High performance, highly Dekguard E2000 is designed to protect 1.6 to 2.5 m2/litre/coat
20 litre elastomeric and crack atmospherically exposed, reinforced
bridging, water based, acrylic, concrete structures (above any splash
anticarbonation protective and zones) from attack by chloride ions, oxygen
decorative exterior coating system and moisture ingress, especially where
for concrete surfaces of bridges there is a danger of subsequent cracks
and industrial structures. appearing within the substrate. Typical uses
include, but are not necessarily limited to,
the following :
• New and existing structures
• Concrete storage tanks - external surfaces
• Bridge structures.
18
18 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Nitocote EP140(M) Two component, epoxy resin and A chemical and UV light resistant 10 m2 / litre/coat @ 100
4 litres micaceous iron oxide based internal coating for steel tanks, concrete walls, microns WFT
and external protective coating for bridges, concrete and metal columns,
steel and concrete surfaces. sluices and ducts.
Nitocote EN901 High chemical resistant protective Suitable in waste water treatment plants, 2.0m2/litre @500 microns
4 litre coating. desalination plants, food processing plants, WFT per coat.
pulp and paper mills, power plants chemical
manufacturing plants, fertilizer plants and
petroleum refineries.
Nitocote EPW100 Water based epoxy coating Suitable for applications to reservoirs, tanks, 20-22m2/pack/coat @ 180
4 litres and sealer. ducts, silos, water treatment works, breweries, microns WFT (100 microns
dairies, kitchens and food processing plants. DFT)
Nitocote EP410 Epoxy resin tank and surface Provide protection against corrosion and 16m2 @ 250 micros
4 litres lining material. aggressive agents. Suitable for internal coatings thickness WFT per pack
of concrete and steel structural elements.
Nitocote Wall Guard Elastomeric & decorative acrylic Nitocote Wall Guard is an acrylic cementitious, 3 to 3.5 sqmt / litres in two
White base : 20, 4 &1 waterproofing coating for elastomeric coating with inherent crack- coats
litres Dark base : 19, 3.8 exterior walls. bridging ability. Provides a high quality
& 0.95 litres effective waterproofing cum decorative
Midtone base : 19, 3.8 & coating for exterior wall. Prevents dampness
0.95 litres of external wall subjected to severe weather
in coastal environment.
Nitocote ET 550 Epoxy-coal tar, amine adduct based, Suitable for tanks above ground or in totally 1.8-1.9 m2/litre @
18 litres high build, coating. submerged conditions such as pipelines. 350 microns DFT
Particularly useful in sewage works, effluent
treatment plants, dock and harbour
installations.
Nitocote ET 140 Low build epoxy-coal tar based Suitable for tanks above ground or in totally 40 m2/4 litre pack
4 litres protective coating. submerged conditions such as pipelines. @ 100 microns
Particularly useful in sewage works, effluent WFT
treatment plants, dock and harbour
installations.
Nitocote ET 402 Solvent free, high build, epoxy- Provides protective coating for sea water tanks, 5.0m2/litre @ 200 microns
10 litres coal tar based protective coating intake channels, manhole drain & sewerage & WFT (per coat)
for steel and concrete. effluent plants, jetty piles & docks.
Nitocote NT 402 Non tar Based Environmentally Provides chemical and abrasion resistance 5.0 m2/litre @ 200 microns
10 litres friendly epoxy resin coting. to prevent corrosion of concrete surfaces for WFT (per coat)
applications such as seawater tanks, channels,
intakes, manhole linings, sewage works,
effluent plants, chemical processing, foundation
waterproofing, Jetties, piers and docks.
www.fosroc.com 19
19
Product Description Typical Uses Dosage/Coverage/Yield
Nitocote PUW100 Water dispersed, low VOC, eco- Nitocote PUW100 provides a pigmented 10m2/litre/coat @ 100
4 litres friendly, antifungal and weather sealing coat on to cementitious and concrete microns WFT (45 microns
resistant, polyurethane based surfaces providing dust proof, easily DFT)
internal and external protective cleanable and resistant to penetration of
coating cum sealer for concrete oils and liquids. The cured film is resistant to
and masonry surfaces for food corrosion, chemicals and abrasion. Suitable
and pharma industries. for application in breweries, dairies, kitchens
and food processing plants. The cured film
forms a waterproof barrier and is non-toxic.
Nitocote PE 135 Eco friendly, protective coating Suitable as both protective coating, 2.5m2 per litre @ 400
4 & 20 litres based on hydrophobic polyster waterproof & curing compound. Ideal for microns WFT /coat
resin. protection to all concrete structures.
Nitocote SN522 Ready to use colourless silicone To provide a water repellent with 4.5 - 9m2/litre
1, 5 and 20 litres water repellent. improved self cleaning properties
on exteriors of buildings, brick work,
concrete, cement rendering, natural
or cast stone.
Nitocote SN525 Monomeric silane water A deep penetrating treatment designed 175 - 350ml / m2
25 & 200 litres repellent penetrant. to protect concrete from both water and
chloride ingress whilst still permitting
water vapour transmission (breathe
ability).
Nitocote HT 120 Solvent free, novel resin For high temperature service conditions up 5.0m2/litre @ 200 microns
4 litres protective coating system for to 120 degree Celsius. It is particularly used WFT per coat
steel and concrete. to resist boiling water under continuous or
partial service conditions.
20 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Nitocote EM300 High performance moisture Fosroc Nitocote EM 300 protective coating 4 to 4.5 m2 / litre/coat @
4 litres compatible corrosion resistant system has been exclusively developed by 225 to 250 microns WFT.
internal protective coating CECRI - CSIR, karikudi for protection of the
system for concrete and steel internal concrete surface of the cooling
surfaces of NDCT and IDCT
towers - IDCT and NDCT of thermal power
cooling towers - CECRI-CSIR
plants as per the performance requirements.
technology.
The other areas of applications includes the
Internal surface protection of water treatment
plants, STPs, & ETPs and substructures of
transportation bridges.
Nitocote BCS 300 Epoxy-polyurethane based multi- This is a chemical and UV ray resistant Refer datasheet
Multicoat system coat exterior chemical, corrosion high build multicoat protective coating
and weather resistant protective system for bridge decks, RCC girders
coating system for concrete and other atmospherically exposed RCC
surfaces of bridges and industrial structures.
structures - CECRI-CSIR technology.
www.fosroc.com 21
Joint Sealants
Flexible jointing material that acts as a seal or fills gap between two elements
in order to accept thermal movements.
Nitoseal MS600 One part, methyl silyl sealant for Nitoseal MS600 is suitable for sealing movement Refer datasheet
Black - 3 litres immersed conditions. joints in buildings and civil engineering structures
Grey - 3 litres including joints that will be subject to intermittent
or permanent immersion.
Building Sealants
Decofill Fast setting flexible acrylic • Wall / ceiling angles, cornices Refer datasheet
310ml cartridges sealant. • Door and window frame surrounds
• Fitted furniture
• Skirtings
• Staircases
• Replacement window installations
Nitoseal MS60 One part, general purpose Suitable for sealing joints in concrete, brickwork, Refer datasheet
600ml sachet x 10 per box building sealant block work, perimeter sealing around doors &
380 ml cartridge x 20 per windows, non-trafficed floor joints
box
Nitoseal MS100 One part, primer less non-staining Brick masonry pre-cast panels, stone cladding, Refer datasheet
380ml cartridge facade sealant windows, doors, sealing of joints in and around
600 ml sausage concrete, fibre cement sheeting
Nitoseal MS300 One part, floor joint sealant Internal floors, external joints where abrasion Refer datasheet
600ml sackets resistance is required. Factory floors, sports,
stadia terracing, shopping centres, warehouse,
prisons
Nitoseal PU40 One part, PU based building & Nitoseal PU40 is suitable for sealing joints in Refer datasheet
600ml sachet expansion joint sealant. concrete, brickwork, block work, precast panels,
stone cladding, perimeter sealing around doors
and windows, and non trafficked floor joints.
Nitoseal PU 280 Heavy duty epoxy urethane For sealing internal floor joints subject to heavy Refer datasheet
4.0 litres joint sealant. industrial use in factories warehouses etc.
particularly suitable for saw cut joints for long
strip flooring and other nonmoving joints.
Pavement Sealants
Colpor 200/200PF Cold applied, high performance, For sealing joints in concrete joints in concrete Refer datasheet
Black - 3 litres fuel resistant, pitch and pitch free roads, concrete runways. Also suitable for
Grey - 3 litres polyurethane sealant. sealing concrete joints where fuel and oil spillage
might occur like runways, oil terminals, parkings
and cargo areas.
Hydrocell XL High performance, cross linked, Hydrocell XL is a cross linked, non absorbent, Refer datasheet
900 x 1800 mm sheets closed cell, nonabsorbent, semi-rigid, cellular polyethylene joint filler used for
polyethylene joint filler. forming expansion joints in concrete, brickwork
and block work. The product provides excellent
support to sealants subject to hydrostatic pressure
and is particularly recommended for water
retaining or water excluding structures.
22 www.fosroc.com
Waterproofing
Liquid applied & preformed membranes for waterproofing of structures.
Brushcrete Acrylic Polymer for concrete & Brushcrete polymer in conjunction with cement Refer datasheet
5, 10, 20 and 50 masonry provides a seamless waterproof coating to
litres concrete and masonry surfaces.
Hydroproof Xtra Single component polymer for Hydroproof Xtra polymer in conjunction with 4.5 to 5.0 m2 / L / coat
0.5, 1, 5 & 20 litres cement based waterproofing. cement provides a seamless waterproof coating to
concrete and masonry surfaces.
Crystalline Waterproofing System
Brushbond TGP Crystalline capillary For waterproofing against the positive or negative 1.0 to 2.0 kg/m2 per
waterproofing system for sides of hydrostatic heads of water, for damp application (brush)
15Kg
cementitious substrates. roofing, repairing cracks, plugging holes, sealing
wall- floor joints and stopping active leaks.
Bituminous Waterproof Coating
Nitoproof 100/120 Bituminious waterproofing coating. External coating for below ground structures Nitoproof 100-4-6 m2/litre
such as cellars waterproofing, protection of Nitoproof 120-2.8-3.5 m2/
concrete against ground water ingress. litre/coat
www.fosroc.com 23
Product Description Typical Uses Dosage/Coverage/Yield
Brushbond TI Flexicoat Elastomeric acrylic polymer For use as a thermal insulation coating on roof 2.5-3.0 m2/2coat/litre
4 & 20 litres based solar reflective and slabs and walls of building. It can also be used on
insulating coating. the interior walls and the roof of freezer rooms
and cold storage facilities.
Sheet Membranes
Proofex Torchseal 3PI 3 mm plain finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
waterproofing membranes. membranes for Concrete roof and floor slabs,
Shallow Basement tankings, Car park deck slabs,
Concrete retaining structures,Tunnels & subways.
Proofex Torchseal 3SI 3 mm slated finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
waterproofing membranes. membranes for Concrete roof and floor slabs,
Shallow Basement tankings, Car park deck slabs,
Concrete retaining structures,Tunnels & subways.
Proofex Torchseal 3SI 3 mm slated finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
Standard waterproofing membranes. membranes for:
• Concrete roof and floor slabs
• Shallow Basement tankings
• Car park deck slabs
• Concrete retaining structures
• Tunnels and subways
Proofex Torchseal 3PI 3 mm plain finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
Standard waterproofing membranes. membranes for Concrete roof and floor slabs,
Shallow Basement tankings,Car park deck slabs,
Concrete retaining structures,Tunnels & subways.
Proofex Torchseal 4PI 4 mm plain finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
waterproofing membranes. membranes for Concrete roof and floor slabs,
Deep Basement tankings, Car park deck slabs,
Concrete retaining structures,Tunnels & subways.
Proofex Torchseal 4PI 4 mm plain finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
Standard waterproofing membranes. membranes for Concrete roof and floor
slabs,Car park deck slabs,Concrete retaining
structures,Tunnels and subways.
Proofex Torchseal 4SI 4 mm slated finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
waterproofing membranes. membranes for Concrete roof and floor slabs,
Deep Basement tankings, Car park deck slabs,
Concrete retaining structures,Tunnels & subways.
Proofex Torchseal 4SI 4 mm slated finish torch applied To provide waterproofing and damp-proof Refer Product data sheet
Standard waterproofing membranes. membranes for:
• Concrete roof and floor slabs
• Shallow Basement tankings
• Car park deck slabs
• Concrete retaining structures
• Tunnels and subways
Proofex Torchseal Double reinforced torch applied To provide waterproofing of bridge 8.90 m2/ Roll
4PDRI waterproofing membranes. deck slab and subways. Inclusive of overlapping
10 m long x 1m wide roll
Proofex Self Adhesive 2mm thick Geo-Fabric topped Continuously bonded waterproof membrane 13.4 m2/ Roll
Geotext (250 microns Geo-Fabric Film) cold for below ground waterproofing building and with 100 mm overlapping
15 m long x 1m wide roll applied bituminous waterproofing civil engineering structures.
membrane.
Proofex Self 1.5 mm PE topped ployster It is used as a cold applied waterproofing / 13.4 m2/ Roll
Adhesive PR15 reinforced cold applied damp proofing membrane in horizontal and with 100 mm overlapping
15 m long x 1m bituminous waterproofing vertical applications for protection of various
wide roll membrane. substrates like concrete, masonry, Gl,
aluminium, wood etc.
24 www.fosroc.com
Product Description Typical Uses Dosage/coverage/Yield
Dosage/Coverage/Yield
Proofex Self 2 mm PE topped polyster It is used as a cold applied waterproofing/ 13.4 m2/ Roll
Adhesive PR 20 reinforced cold applied damp proofing membrane in horizontal with 100 mm
15 m long x 1m bituminous waterproofing and vertical applications for protection of overlapping
wide roll membrane. various substrates like concrete, masonry, Gl,
aluminium, wood etc. in wide range of uses:
Proofex PGP Loose laid PVC waterproofing Provides a continuously loose laid waterproof Refer Product data sheet
25 m long x 2.1 m membrane. membrane system for building and civil
wide roll engineering structures and is particularly
suited to below ground construction.
Basement, tunnel, reservoirs, lakes and canal
waterproofing.
Proofex PGP(X) Loose laid PVC waterproofing Provides a continuously loose laid waterproof Refer Product data sheet
membrane. membrane system for building and civil
engineering structures such as Basement
waterproofing, Tunnel waterproofing,
Podiums and covered roof waterproofing ,
Green roofing.
Fosroc Membrane Pre-applied HDPE pressure Critical & deep basements, durable, simple 20 m2 and 40 m2 respectively
HDPE-P sensitive adhesive waterproofing application, inert product, resistant to
1m x 20m x 1.2 mm membrane which bonds chemicals and aggressive ground salts.
2m x 20m x 1.2 mm physically with concrete.
Fosroc Membrane Pre-applied HDPE pressure sensitive Fosroc Membrane HDPE-P (Smooth) RF Refer Product data sheet
HDPE-P(Smooth)RF adhesive waterproofing membrane provides water, water vapour and gas
1m x 20m x 1.2 mm which bonds integrally to poured protection to water excluding structures
concrete, remaining in place if and protects concrete from aggressive
settlement of substrate occurs. ground salts, chemicals and hydrocarbons.
Fosroc Membrane Pre-applied HDPE pressure sensitive Fosroc Membrane HDPE-P Standard Refer Product data sheet
HDPE -P Standard adhesive waterproofing membrane provides water, water vapour and gas
which bonds integrally to poured protection to water excluding structures
concrete, remaining in place if and protects concrete from aggressive
settlement of substrate occurs. ground salts, chemicals and hydrocarbons.
Fosroc Membrane Post Applied Self Adhesive Fosroc Membrane HDPE-S provides water, Refer Product data sheet
HDPE-S waterproofing membrane for water vapour and gas protection to water
1m x 20m x 1.2 mm vertical reinforced concrete excluding structures for vertical reinforced
members for below ground concret and protects concrete from
structures. aggressive ground salts, chemicals and
hydrocarbons.
Proofex 3000 Cold applied, flexible, waterproof, A high performance self-adhesive membrane for Refer Product data sheet
20 m long x 1 m wide high performance membrane a rangeof waterproofing applications including
roll incorporating a cross laminated basements and substructures. It provides a
HDPE carrier film with a polymer vapour and waterproof membrane to water
modified bitumen compound. excluding structures and protects concrete from
attack by aggressive ground salts.
Proofex ORG Loose laid synthetic TPO Provides a continuously loose laid waterproof Refer Product data sheet
Proofex OGP waterproofing membrance. membrance system for building and civil
Proofex OFB engineering structures:
25m x2.1m roll Podiums, parking decks, flat roofs and garden
roofs waterproofing. Basement waterproofing.
Lining of ponds, canals, reservoirs and landfills.
Proofex Engage Pre-applied waterproofing Critical & deep basements, durable, simple 38.10 m2
1.27 x 30 m membrane conforming to the application, inert product, resistant to
requirements of BS EN 13967:2004 chemicals and aggressive ground salts.
and BS 8102:2009. Proofex Engage
mechanically bonds to poured
concrete, remaining in place if
settlement of substrate occurs
Proofex Sheetdrain Geocomposite HDPE drainage Proofex Sheetdrain is an HDPE cuspated drainage Refer Product data sheet
80: 2 m x 20 m roll and protection membrane sheet, available in 2 sizes: 8mm for depths up to
100 2.44m x 12.5m roll 6m and 10mm for depths up to 20m. It is fi xed to
walls and roofs of structures to provide a fi ltered,
drainage plane that will route ground water and
gases away from the structure.
www.fosroc.com 25
Product Description Typical Uses Dosage/Coverage/Yield
Proofex Cavitydrain High density polyethylene drained Proofex Cavitydrain is used where sub-structures Refer datasheet
80: 2 m x 20 m roll cavity former for waterproofing of are constructed in concrete designed to minimise
100 2.44m x 12.5m roll sub-structures water entry in accordance with BS 8102:2009
‘Protection of structures against water from the
ground’,
Proofex Cavitydrain provides a continuous water
and damp proof drainage former to connect with
drainage channels or outlets cast into floor slabs.
Fosroc Polyurea WPE Fast setting, pure polyurea Anti-corrosion, waterproof and protective 1.5 litre / m2 /
Drums : 400 litres elastomeric waterproof coating. coating for concrete and steel in a wide range 1.5mm thick
of environmental conditions.
Fosroc Polyurea WH Fast setting, hybrid polyurea/ Waterproofing and Protective coating for 1.5 litre / m2 /
200/Fosroc Polyurea polyurethane elastomeric concrete & steel in a wide range of environmental 1.5mm thick
WH 200GR waterproof coating. conditions. Stadium stand, service roofs,
Part A ISO Component Podiums, cut & cover tunnels,*Green roof,
46ltr, 194 ltr. * Landscape,*( Fosroc Polyurea WH 200GR)
Part B Amine * Consult Fosroc
Components 46 Ltr,
194 ltr
Fosroc Polyurea WPW Fosroc Polyurea WPW is a spray- Anti-corrosion, waterproof and protective 1.5 – 2.0 litres per m2
188 litre drums Part A applied, 100% solids, flexible, coating for the internal linings of potable water (1.5 - 2.0mm thickness)
188 litre drums Part B two-component, rapid curing containment structures. depending on specification
18 litre drums Part A pure Polyurea system, designed
as a waterproofing and protective
18 litre drums Part B
coating. It combines the advantages
of seamless coating with very long
life cycles and high durability.
Fosroc Polyurea WCS Fast setting, pure polyurea Standard grade offers an anti-corrosion, Refer datasheet
Boxes of 6 x 600 ml elastomeric waterproof coating. waterproof and protective coating for small areas
and repairs of polyurea coatings, on concrete and
steel surfaces.
Gun Grade offers an excellent seam seal for the
Fosroc Proofex Engage waterproofing system.
PVC Waterstops
Supercast PVC Centrally and externally placed The Supercast range of PVC waterstop is designed to Refer datasheet
PVC waterstops swellable provide an integral sealing system for movement &
waterstops. construction joints in concrete cast in-situ. These joints
typically occur in the following types of structure:
Water retaining : Reservoirs, water towers and sewage
tanks, dams, culverts, canals & spillways, swimming
pools, bunded areas surrounding liquid retaining tanks.
Swellable Waterstops
Supercast SW 10 Swellable waterstop for in-situ Typical uses include secant piled and diaphragm Refer datasheet
15m roll concrete. walled basements, pile caps and casting against
old concrete.
For all construction joints subjected to water
pressure.
Supercast SW 20 Swellable waterstops for in-situ Typical uses include secant piled and diaphragm Refer datasheet
5m roll concrete. walled basements, pile caps and casting against
old concrete.
For all construction joints subjected to water
pressure.
Supercast SW30 High swell hydrophillic Typical uses include secant piled and diaphragm Refer datasheet
5 m rolls waterstop for in-situ concrete. walled basements, pile caps and casting against
old concrete. Also for structures in saline
environment.
For all construction joints subjected to water
pressure.
26 www.fosroc.com
Product
Product Description
Description Typical
Typical Uses
Uses Dosage/coverage/Yield
Dosage/Coverage/Yield
Supercast SWX Swellable waterstops for Fixing of swellable waterstops. Refer datasheet
310 ml & 600 ml in-situ concrete.
cartridge
Nitofoam
Fosroc Nitofoam 40 Fosroc Nitofoam 40 is a two Particularly suitable for coating with Fosroc Refer datasheet
component,HFC blown, free from Polyurea, Polyurethane & Brushbond Roofguard
CFC/HCFC polyurethane based system for a combination of waterproof and fire-
sprayable rigid foam system, rated insulation system for roofs.
closed-cell type, designed to meet
insulation requirements in roof
applications.
Fosroc Nitofoam 45 Fosroc Nitofoam 45 is a two Particularly suitable for coating with Fosroc Refer datasheet
component,HFC blown, free from Polyurea, Polyurethane & Brushbond Roofguard
CFC/HCFC polyurethane based system for a combination of waterproof and fire-
sprayable rigid foam system, rated insulation system for roofs.
closed-cell type, designed to meet
insulation requirements in roof
applications.
www.fosroc.com 27
Adhesives
Jointing materials as a bonding agent to provide
structural integrity.
Nitobond PC Thixotropic epoxy adhesive for Bonding precast concrete segments to speed up 1.63 m2 / pack @ 2 mm
6 kgs precast segments. construction and provide structural and water thickness
resistant joint eg. flyovers, bridges, pipelines etc.
Nitobond EP Standard Two component epoxy bonding Bonding old and new cementitious substrates. 2.0 - 2.5 m2/litre
1 & 4 litres agent supplied in pre-weighed
quantities for ready on-site mixing
and use.
Nitobond AR Acrylic emulsion cement modifier Recommended as a primer for the Fosroc 6-8 m2/litre
1, 5, 20 litres and concrete bonding agent. cementitious repairs system for improving
bonding in renders and mortars, repair of
worn, damaged or spalled concrete.
Nitobond AR Acrylic emulsion cement modifier It is useful as polymer modified mortars Approximately
Standard and concrete bonding agent. and screeds for reinstatement of worn out 6 - 8 m2/ litre
1, 5, 20 litres / damaged concrete. It is also added to the
concrete for improving the impermeability
and thereby enhancing the waterproofing
property.
Nitobond SBR Styrene butadine polymer Used to modify the concrete for approximately 4- 5 m2/ litre
1, 5, 20 litres bonding agent cum cement repairing destressed RC members and depending on
mortar & concrete modifier. to modify mortars as waterproofing. substrate porosity
Nitobond SBR Latex Latex acrylic polymer based For modifying and improving bonding of approximately 4- 5 m2/ litre
1, 5, 20 litres cement modifier cum bonding floor toppings, renderings and mortars; depending on
aid with waterproofing repair of worn, damaged and spalled substrate porosity
property. concrete, repair of large cracks, polymer
modified floor screeds, waterproof plasters
for masonry and slurries.
Conbextra Block Ready to use mortar for AAC blocks Bedding for fixing AAC blocks and fly ash 40 kg bag when mixed with
Jointing Mortar and fly ash bricks. bricks 10 - 10.8 L of water, yields
6 kgs 30.80 L of volume
28 www.fosroc.com 19
Tile Adhesives
Tile fixing solutions.
Tile Adhesive
Nitotile GP General purpose tile adhesive. Fixing of ceramic and clay tiles in dry indoor Approx. 2-3 sq.ft/kg for 3mm
20 kg and 40 kg bags applications. thickness using 6mm x 6mm
Fixing of non-vitrified tiles square notch trowel.
Nitotile GPX High performance tile adhesive. • Kitchens and bathrooms Approx. 2-3 sq.ft/kg for 3mm
20 kg and 40 kg bags • Tile claddings thickness using 6mm x 6mm
• Fixing of ceramic and vitrified tiles square notch trowel.
Nitotile GTA Granite and marble tile adhesive. • Stone tiles Approx. 2-3 sq.ft/kg for 3mm
20 kg and 40 kg bags • Marble tiles thickness using 6mm x 6mm
• Stone tiles square notch trowel.
Nitotile MPA Multipurpose tile adhesive. • Tile on tile Approx. 2-3 sq.ft/kg for 3mm
20 kg and 40 kg bags • Vitrified tiles fixing thickness using 6mm x 6mm
• Glass mosaic tile fixing square notch trowel.
• Tiles in swimming pools
Tile Grout
Nitotile Grout Pigmented, cement based tile High quality joint filler for filling the tile joints. Refer datasheet
1 kg joint filler.
Nitotile EPW Grout Hygienic, hard wearing stain Provides a stain free, chemical resistant, Refer datasheet
1 kg & 5 kgs free water miscible epoxy resin hard wearing, tile joint for areas like
tile grout. bathrooms, fountains and swimming pools.
Factories, workshops and ware houses
pharma industry, hospitals and labs
commercial & residential buildings.
www.fosroc.com 29
Grinding Aids &
Performance Enhancers
Product Description Typical Uses Dosage/Coverage/Yield
Cemax 333J A liquid dispersing agent, for use For use as a grinding aid and performance Refer datasheet
as a grinding aid and performance enhancer for the production of Portland
enhancer for the production of and other hydraulic cements.
Portland and other hydraulic
cements
Cemax 300G A liquid dispersing agent, for For use as a grinding aid for the Dosage 0.01 - 0.07% by
use as a grinding aid for the production of Portland and other weight, depending on type
production of Portland and other hydraulic cements, suitable for enhancing of clinker, type of mill and
hydraulic cement productivity of cement mills. desired results.
Cemax 691 Performance Enhancer for To improve cement mill grinding efficiency Refer datasheet
Blended and Portland Cements and compressive strength of cement.
Cemax 343M A liquid dispersing agent, for For use as a grinding aid and performance Dosage 0.03 - 0.07% by
use as a grinding aid for the enhancer for the production of Portland weight, depending on type
production of Portland and other and other hydraulic cements. of clinker, type of mill and
hydraulic cements. desired results.
Cemax 102S A liquid dispersing agent, for For use as a grinding aid for the 0.01 - 0.04% by weight,
use as a grinding aid for the production of Portland and other depending on type of
production of Portland and other hydraulic cements. clinker, type of mill and
hydraulic cements. desired results
30 www.fosroc.com
Product Description Typical Uses Dosage/Coverage/Yield
Cemax 350CL Grinding aid for coal grinding. Cemax 350CL series are an aqueous 0.03% - 0.10% by weight
solution of high performance dispersing of coal/petcoke
agent for use as a grinding aid for coal/
petcoke grinding.
Cemax 412 Grinding aid for performance For use as a grinding aid performance 0.03 - 0.07% by weight,
enhancer. enhancer for the production of portland and depending on type of clinker,
other hydraulic cements. type of mill and desired results
Cemax 415 Grinding aid for performance For use as a grinding aid performance enhancer 0.03 - 0.07% by weight,
enhancer. for the production of portland and other depending on type of clinker,
hydraulic cements. type of mill and desired results
Auracem 604 High performance grinding aid For use as a grinding aid and performance 0.03 - 0.07% by weight,
and performance enhancer. enhancer for the production of portland and depending on type of clinker,
limestone cements. type of mill and desired results
DISINFECTANT
Surface Cleaner
Reebaklens High performance disinfectant For disinfecting surfaces such as walls, floor, Refer datasheet
Disinfectant appliances, cabinets, table tops, sinks, door
0.5, 1, 2 & 5 L packs knobs, sofa and curtains etc.
*Not for applications on food or any edibles
www.fosroc.com 31
FOSROC OPERATIONS
Chandigarh
Noida
Jaipur
Lucknow
Keshwana
Patna Guwahati
Ahmedabad
Kolkata
Ankleshwar
Nagpur
Bhubaneswar
Navi Mumbai
Pune
Head Office
Plant
Vizag Regional Offices
Hyderabad
Branch Offices
Bangalore
Chennai
Important Note
Fosroc products are guaranteed against defective materials and manufacture and are sold
subject to its standard terms and conditions of sale, copies of which may be obtained on
request. Whilst Fosroc endeavours to ensure that any advice, recommendation, specification
or information it may give is accurate and correct, it cannot, because it has no direct or
continuous control over where or how its products are applied, accept any liability either
directly or indirectly arising from the use of its products, whether or not in accordance with
any advice, specification, recommendation or information given by it. constructive solutions